SIf a NIC was using ROM Address C0000-CFFFF, what switch could be used in order to prevent the EMM386.SYS memory manager from allocating this space range?
4/P /E /S /R 2 SIf a print job has characters or words dropped from the document but it is clear that they exist in the original, what utility would you use to fix the problem and what action should be taken?
4PRINTCON - change the size of the header and tail buffers. CAPTURE or NPRINT - check for No Tabs. PCONSOLE - increase the buffer size for the printer definition screen. SMODE - change the job configuration file format. 3 MWhich of the following are rules that apply to Ethernet 10BASE2?
530 devices per segment 100 devices per segment Maximum segment length of 185 meters Maximum segment length of 500 meters Both sides must be terminated and grounded 5 MWhich of the following are built-in troubleshooting mechanisms found in Token Ring?
4Jam Pattern Beaconing Signal Quality Error Autoreconfiguration 10 MMatch the IRQ number with the proper Usage.
5IRQ 13 IRQ 14 Floppy Disk Hard Disk Controller Real Time Clock 10 SLook at the picture and then select the response for the missing step 3.
4If the printer is ready, the PS notifies the printer about the incoming job. If the printer is not ready, the PS holds the job until the print buffers are free. If the printer is ready, the PS accepts the data from the queue. If the printer is not ready, the PS will poll the queue after a delayed period. 2 RPRINTER.BMP
