HPAVC/HPAVC CD-ROM.iso/pc/BMP2BPI.ZIP/bmp2bpi.asm

Assembly Source File | 1994-12-17 | 11.5 KB | 751 lines

page 60,132

; BMP to BPI (Bit Plane Image) converter
;
;
; Dave Springer, Feb. 1994
; Copyright (C) 1994 Springer Engineering
;
; misc equates
;
cr    equ    0dh
lf    equ    0ah
eom    equ    '$'

cseg     segment   para public 'CODE'
;
     org       100h

         assume    cs:cseg,ds:cseg,es:cseg,ss:cseg

plane1 equ 2        ;2
plane2 equ 3        ;3
plane3 equ 4        ;1
plane4 equ 1        ;4

transparent_plane equ 5

post   proc      near

    call get_filenames
    call initialize            ;initialize file stuff

start_plane equ 2

    mov plane_number,plane1
    call state_start
    call store_header
    call do_plane

    mov plane_number,plane2
    call state_start
    call store_header
    call do_plane

    mov plane_number,plane3
    call state_start
    call store_header
    call do_plane

    mov plane_number,plane4
    call state_start
    call store_header
    call do_plane

    cmp transparent_plane_flag,1
    jne no_transparent_plane
    mov plane_number,transparent_plane
    call state_start
    call store_header
    call do_plane
no_transparent_plane:
    jmp end_program            ;finish it off

;***************** subroutines (start here) *****************
; hahhahaha. Verbose, aren't I ?
;**********************************

store_header:
    cmp plane_number,plane1
    jne store_header_done

    mov bx,rows
    mov al,bl
    call store_sample
    mov al,bh
    call store_sample
    mov bx,columns
    mov al,bl
    call store_sample
    mov al,bh
    call store_sample
    mov al,transparent_plane_flag
    call store_sample

    mov cx,11
sth_loop:
    xor al,al
    call store_sample
    loop sth_loop

store_header_done:
    mov ax,columns
    ror ax,1
    ror ax,1
    ror ax,1
    test ah,0e0h
    jz ss_1
    and ah,1fh
    inc ax
ss_1:
    shl ax,1
    shl ax,1
    mov bytes_per_row,ax

    mov ah,42h
    mov al,2
    mov bx,in_handle
    xor cx,cx
    dec cx
    xor dx,dx
    sub dx,bytes_per_row
    int 21h
    mov ah,3fh
    mov bx,in_handle
    mov cx,bytes_per_row
    mov dx,offset in_buf
    int 21h
    ret

do_plane:
    mov cx,bytes_per_row
    shr cx,1
    shr cx,1
    mov si,offset in_buf
do_row:
    push cx
    cmp plane_number,transparent_plane
    jne do_normal_row
    call make_transparent_byte
    pop cx
    loop do_row
    jmp dp_row_done
do_normal_row:
    call make_byte
    pop cx
    loop do_row
dp_row_done:
    dec rows
    jz do_plane_done
    call back_up_2_rows
    jmp do_plane
do_plane_done:
    ret

make_byte:
    mov ch,plane_number
    xor bl,bl
    lodsb

    mov cl,ch
    rol al,cl
    rcl bl,1
    mov cl,4
    rol al,cl
    rcl bl,1

    lodsb

    mov cl,ch
    rol al,cl
    rcl bl,1
    mov cl,4
    rol al,cl
    rcl bl,1

    lodsb

    mov cl,ch
    rol al,cl
    rcl bl,1
    mov cl,4
    rol al,cl
    rcl bl,1

    lodsb

    mov cl,ch
    rol al,cl
    rcl bl,1
    mov cl,4
    rol al,cl
    rcl bl,1

    mov al,bl
    call store_sample
    ret


make_transparent_byte:

    xor bl,bl
    mov cx,4
mtb_src_byte_loop:
    push cx
    mov cl,4
    lodsb
    mov ah,al
    rol al,cl
    and al,0fh
    cmp al,transparent_plane_color
    clc
    jz mtb_even_pix_done
    stc
mtb_even_pix_done:
    rcl bl,1
    and ah,0fh
    cmp ah,transparent_plane_color
    clc
    jz mtb_odd_pix_done
    stc
mtb_odd_pix_done:
    rcl bl,1
    pop cx
    loop mtb_src_byte_loop

    mov al,bl
    call store_sample
    ret

plane_number db start_plane
rows dw 0
columns dw 0
data_start dw 0
bytes_per_row dw 0
transparent_plane_flag db 0
transparent_plane_color db 0

back_up_2_rows:
    push ax
    push bx
    push cx
    push dx
    mov ah,42h
    mov al,1
    mov bx,in_handle
    xor cx,cx
    dec cx
    xor dx,dx
    sub dx,bytes_per_row
    sub dx,bytes_per_row
    int 21h

    mov ah,3fh
    mov bx,in_handle
    mov cx,bytes_per_row
    mov dx,offset in_buf
    int 21h
    pop dx
    pop cx
    pop bx
    pop ax
    ret

state_start:
    call reset_input_file
    mov cx,0ah
ss_loop1:
    call get_sample
    loop ss_loop1

    call get_sample
    mov bl,al
    call get_sample
    mov bh,al
    mov data_start,bx

    mov cx,6
ss_loop2:
    call get_sample
    loop ss_loop2

    call get_sample
    mov bl,al
    call get_sample
    mov bh,al
    mov columns,bx
    call get_sample
    call get_sample
    call get_sample
    mov bl,al
    call get_sample
    mov bh,al
    mov rows,bx

    call reset_input_file

    mov cx,data_start
ss_loop3:
    call get_sample
    loop ss_loop3

    ret

reset_input_file:
    xor ax,ax
    mov end_file_flag,al        ;end of file false
    mov final_in_buf_top,ax        ;final inbuf false
    mov in_buf_ptr,offset in_buf_top;force buffer read
    mov ax,4200h            ;move file pointer to
beginning of file
    mov bx,in_handle        ;for the input file
    xor cx,cx            ;zero into big count
    mov dx,00h            ;skip over offset
    int 21h                ;do it
    ret

reset_output_file:
    mov ah,40h            ;first flush any buffers
    mov cx,out_buf_ptr
    sub cx,offset out_buf
    jz rof_flushed
    mov dx,offset out_buf
    mov bx,out_handle
    int 21h                ;flush final out buffer
rof_flushed:
    mov out_buf_ptr,offset out_buf_top ;force buffer read
    mov ax,4200h            ;move file pointer to
beginning of file
    mov bx,out_handle        ;for the input file
    xor cx,cx            ;zero into big count
    mov dx,00h            ;skip over offset
    int 21h                ;do it
    ret

get_filenames:
    mov si,80h
    mov cl,[si]
    xor ch,ch        ;get command tail length
    cmp cx,2        ;see if any there
    jl exit1        ;else exit
    mov bx,offset in_file
    inc si
    cmp byte ptr [si],' '
    je file_parse_loop
exit1:
    call signon
    mov dx,offset file_error_mess
    mov ah,9
    int 21h
    int 20h

file_parse_loop:        ;parse out one filename
    inc si
    mov al,[si]
    cmp al,cr
    je finish_filename
    cmp al,' '
    jne filename_cont
                ;get the bit plane flag here if
present
    inc si
    mov al,[si]
    sub al,30h
    jge bpf_1
    jmp init_exit
bpf_1:
    cmp al,9
    jle bpf_good
    sub al,7
    cmp al,0ah
    jge bpf_2
    jmp init_exit
bpf_2:
    cmp al,0fh
    jle bpf_good
    jmp init_exit
bpf_good:
    mov transparent_plane_flag,1
    mov transparent_plane_color,al
    jmp finish_filename
filename_cont:
    mov [bx],al
    inc bx
    loop file_parse_loop
finish_filename:
    mov byte ptr [bx],'.'
    inc bx
    mov byte ptr [bx],'b'
    inc bx
    mov byte ptr [bx],'m'
    inc bx
    mov byte ptr [bx],'p'
    inc bx
    mov byte ptr [bx],0
    mov si,offset in_file
    mov bx,offset out_file
ffn_loop:
    mov al,[si]
    cmp al,'.'
    jne ffnl_1
;    mov byte ptr [bx],'s'
;    inc bx
ffnl_1:
    mov [bx],al
    inc si
    inc bx
    cmp al,'.'
    jne ffn_loop
    mov byte ptr [bx],'b'
    inc bx
    mov byte ptr [bx],'p'
    inc bx
    mov byte ptr [bx],'i'
    inc bx
    mov byte ptr [bx],0
    ret


store_sample:            ;store sample in al and flush out
buffer
    push ax            ;if necessary
    push bx
    push cx
    push dx
    push di
    mov di,out_buf_ptr
    mov [di],al
    inc di
    mov out_buf_ptr,di
    cmp di,offset out_buf_top
    jne store_sample_done
    mov ah,40h
    mov cx,1000h
    mov dx,offset out_buf
    mov bx,out_handle
    int 21h            ;flush output buffer
    mov out_buf_ptr,offset out_buf
store_sample_done:
    pop di
    pop dx
    pop cx
    pop bx
    pop ax
    ret

get_sample:        ;return next sample in al - uses AX
    push bx        ;carry set if last sample
    push cx
    push dx
    push si
    mov si,in_buf_ptr
    cmp end_file_flag,0
    je gs_not_end_of_file
    mov al,[si]
    inc si
    cmp si,final_in_buf_top
    mov in_buf_ptr,si
    jne gs_not_last_exit
    stc
    jmp get_sample_exit
gs_not_end_of_file:
    cmp si,offset in_buf_top
    jne gs_no_new_buffer
    mov ah,3fh
    mov cx,1000h
    mov bx,in_handle
    mov dx,offset in_buf
    int 21h            ;get first part of input file
    mov si,offset in_buf
    cmp ax,cx
    je gs_no_new_buffer
    mov end_file_flag,1    ;mark end of file if so
    add ax,offset in_buf
    mov final_in_buf_top,ax
gs_no_new_buffer:
    mov al,[si]
    inc si
    mov in_buf_ptr,si
gs_not_last_exit:
    clc
get_sample_exit:
    pop si
    pop dx
    pop cx
    pop bx
    ret

in_file db 60 dup (0)
out_file db 60 dup (0)
in_handle dw 0
out_handle dw 0
end_file_flag db 0
final_in_buf_top dw 0
in_buf_ptr dw offset in_buf
out_buf_ptr dw offset out_buf

end_program:
    mov ah,40h
    mov cx,out_buf_ptr
    sub cx,offset out_buf
    jz end_program1
    mov dx,offset out_buf
    mov bx,out_handle
    int 21h            ;flush final out buffer
end_program1:
    mov ah,3eh
    mov bx,out_handle
    int 21h            ;close out file
    mov ah,3eh
    mov bx,in_handle
    int 21h            ;close in file
    mov dx,offset done_message
    mov ah,9
    int 21h            ;print done message
    int 20h            ;back to dos

done_message db cr,lf,'BMP to BPI File successfully converted',eom

initialize:
    mov ah,3dh
    xor al,al
    mov dx,offset in_file
    int 21h            ;open input file for read only access
    jc init_exit
    mov in_handle,ax
    mov ah,3ch
    xor cx,cx
    mov dx,offset out_file
    int 21h            ;create or open and truncate output
file
    jc init_exit
    mov out_handle,ax
    mov ah,3fh
    mov cx,1000h
    mov bx,in_handle
    mov dx,offset in_buf
    int 21h            ;get first part of input file
    cmp ax,cx
    je init_1
    mov end_file_flag,1    ;mark end of file if so
    add ax,offset in_buf
    mov final_in_buf_top,ax
init_1:
    mov si,in_buf_ptr
    mov di,out_buf_ptr      ;set up buffer indexes
    mov in_buf_ptr,si
    mov out_buf_ptr,di    ;update buffer indexes
    ret
init_exit:
    call signon
    mov dx,offset file_error_mess
    mov ah,9
    int 21h
    int 20h

file_error_mess db cr,lf,lf,'File Error - program aborted.',cr,lf,eom

signon:
    mov dx,offset usage_mess
    mov ah,9
    int 21h
    ret

usage_mess label byte
db cr,lf
db '.BMP to .BPI File Convertor V1.0 - Copyright 1993 Springer
Engineering'
db cr,lf,lf
db '                    Usage - BMP2BPI filename [C]'
db cr,lf,lf
db '                    Where C is the optional color (0-9 or A-F)
build a'
db cr,lf
db '                    transparency plane from.',cr,lf,lf
db '                    (Input File Extension of .BMP is
assumed)',cr,lf
db '                    (Output File is [filename].BPI)',cr,lf,eom

get_key:
    mov ah,1    ;get any key
    int 16h
    jz gks_nokey
    mov ah,0    ;clear out the key and exit
    int 16h
    stc
    ret
gks_nokey:
    clc
    ret

text_color db 0ffh
row db 0
column db 0

gotoxy:
    mov ah,2
    xor bh,bh
    mov dh,row
    mov dl,column
    int 10h
    ret

print_string:
    mov al,[si]
    or al,al
    je pstring_done
    mov ah,14
    mov bl,text_color
    int 10h
    inc si
    jmp print_string
pstring_done:
    ret

print_ax:            ;PRINT THE WORD IN AX
    push ax            ;AT SCN_PTR
    push bx
    push cx
    push dx

    push si
    push di
    push ds
    push es
    push bp
    pushf

    push ax
    mov al,ah
    xor ah,ah
    call hex2ascii
    push dx
    mov al,dl
    call print_AL
    pop dx
    mov al,dh
    call print_al
    pop ax
    xor ah,ah
    call hex2ascii
    push dx
    mov al,dl
    call print_al
    pop dx
    mov al,dh
    call print_al
    mov al,20h
    call print_al

print_ax_done:
    popf
    pop bp
    pop es
    pop ds
    pop di
    pop si
    pop dx
    pop cx
    pop bx
    pop ax
    ret

print_al:
    mov ah,14
    mov bl,text_color
    int 10h
    ret

hex2ascii:    ;convert al reg to ascii in dx (low nibble in dh)
    mov si,offset hex_conv
    mov cx,ax
    and ax,0f0h
    shr ax,1
    shr ax,1
    shr ax,1
    shr ax,1
    mov bx,ax
    mov dl,cs:[si+bx]
    and cx,0fh
    mov bx,cx
    mov dh,cs:[si+bx]
    ret

hex_conv     db     '0123456789abcdef'

;*************************************** END HEX DISPLAY ROUTINES
;
; Display decimal number in BX.
; ASCII ZERO STRING RETURNED IN DECIMAL_STRING
;
decimal_string db 10 dup (0)

DMSDEC:
    push es
    push ds
    pop es
    mov di,offset decimal_string
    PUSH    AX
    PUSH    CX
    PUSH    DX
    PUSH    BX        ; save regs
    MOV    AL,' '        ; load space fill char
    STOSB            ; pad decimal with space
    XOR    AH,AH        ; clear non-display counter
    XOR    CL,CL        ; clear leading zero flag
    MOV    DX,10000
    CALL    _DO1        ; display 10,000's digit
    MOV    DX,1000
    CALL    _DO1        ; display 1,000's digit
    MOV    DX,100
    CALL    _DO1        ; display 100's digit
    MOV    DX,10
    CALL    _DO1        ; display 10's digit
    INC    CL
    MOV    DX,1
    CALL    _DO1        ; display 1's digit
    OR    AH,AH        ; non-display present?
    JZ    _DOX        ; if not, exit
    MOV    AL,' '        ; else, load space fill
_SPL:    STOSB            ; write a space
    DEC    AH        ; more to write?
    JNZ    _SPL        ; if so, continue
_DOX:
    mov al,0
    stosb
    pop es
    POP    BX
    POP    DX
    POP    CX
    POP    AX        ; restore regs
    RET            ; done
_DO1:    MOV    CH,-1        ; load quotient reg
_DOL:    INC    CH        ; inc reg
    SUB    BX,DX        ; try the subtract
    JNB    _DOL        ; if good, continue
    ADD    BX,DX        ; else, restore remainder
    MOV    AL,CH        ; get quotient
    OR    AL,AL        ; results=0?
    JNZ    _DO2        ; if not, continue
    OR    CL,CL        ; leading zero?
    JNZ    _DO2        ; if not, continue
    INC    AH        ; inc non-display count
    RET            ; done
_DO2:    INC    CL        ; inc leading zero flag
    ADD    AL,"0"        ; add ASCII bias
    STOSB            ; write to screen
    RET            ; done


in_buf  equ $
in_buf_top equ $+1000h
out_buf equ $+1000h
out_buf_top equ $+2000h

post  endp

cseg    ends

         end       post