PS4014
Section: User Commands (1)
Updated: 14 July 1987
Index
Return to Main Contents
NAME
ps4014 - convert a Tektronix 4014 files to POSTSCRIPT format
SYNOPSIS
ps4014
[
-RCNm
] [
-poutfile
] [
-lleft,bottom
] [
-swidth,height
] [
-Swidth
] [
file
]
DESCRIPTION
ps4014
reads in a Tektronix 4014-format file and converts it to POSTSCRIPT format
for printing on a POSTSCRIPT printer. If no
file
is specified, the standard input is used.
The resulting POSTSCRIPT file may be directed to the standard output
or to a named file.
The possible options are:
- -p outfile
-
causes the POSTSCRIPT file to be written to the named file rather than
the standard output.
The following parameters affect the size, placement and orientation
of the image on the printed page. By default, the 4014 image is scaled to
occupy nearly the whole page in a landscape orientation.
- -l left,bottom
-
specifies the location on the printed page of the bottom, left corner of the
converted raster image. The values
left
and
bottom
are the distances (in inches) from the bottom, left corner of the printed
page to the bottom, left corner of the image.
- -s width,height
-
Specifies the size of the converted raster image on the printed page.
Width
and
height
are the dimensions (in inches) of the resulting image on the printed page.
- -S width
-
allows you to scale the image without distoring its shape.
Width
specifies the width, in inches, of the resulting image on the printed page.
The height of the image is computed to maintain the same ratio of height
to width on the output image as on the input raster-format file.
- -R
-
rotates the image 90 degrees on the page for portrait orientation.
The default is landscape orientation.
The following parameters specify values for 4014 hardware options that affect
the interpretation of 4014 commands.
- -C
-
causes an carriage return to move the pen position to the left margin but not
down to the next line. By default, a carriage return command moves the
pen down to the next line and over to the left margin.
- -N
-
causes line feed to move the pen position down to the next line
but not left to the left margin. By default, a line feed command moves the
pen down to the next line and over to the left margin.
- -m
-
enables the "Margin 2" mode for the 4014.
ENVIRONMENT
- PSLIBDIR
-
path name of a directory to use instead of
/usr/lib/transcript for ps4014 prologue.
FILES
- /usr/lib/transcript/ps4014.pro
-
default prologue file.
SEE ALSO
plot(1), transcript(1), psplot(1).
Tektronix 4014 documentation.
DIAGNOSTICS
Should be self explanatory.
AUTHOR
Adobe Systems Incorporated
NOTES
POSTSCRIPT is a registered trademark of Adobe Systems Incorporated.
Tektronix is a registered trademark of Tektronix, Inc.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- ENVIRONMENT
-
- FILES
-
- SEE ALSO
-
- DIAGNOSTICS
-
- AUTHOR
-
- NOTES
-
This document was created by
man2html,
using the manual pages.
Time: 00:59:42 GMT, September 26, 2024