

(A)bandon Conference - Function Help
------------------------------------

Subcommands:  NONE

Description:  Places you back in the main section of the board.  If you are not
              in a conference, the main menu is re-displayed along with the
              main command line prompt.


(B)ulletin Listings - Function Help
-----------------------------------

Subcommands:  (#) (A) (D) (G) (N) (R) (S) (NS)

              (#) the bulletin number to view
              (A) displays all of the bulletins
              (D) immediately goes into download mode to send the bulletin
              (G) goodbye
              (N) displays a request bulletin only if it is new to the caller
              (R) re-displays the Bulletin Menu choices
              (S) scans the bulletins for text
              (NS) displays request in non-stop mode

Description:  Allows viewing Bulletins available.

Selecting
Bulletins:    Numbers can be stacked such as "1 2 3" or "1;2;3".

              Typing "A" will select all of the bulletins for display.

              Combining "A" with "N" would display all new bulletins while
              combining "A" with "S" would search all bulletins and display
              only those bulletins containing the search text entered.

Reading
Bulletins:    Typing "NS" selects Non-stop mode which avoid page breaks in the
              display.

              Typing "D" puts the system immediately into download mode to
              send the file using the default protocol.

Examples:     1 2 3   - displays bulletins 1, 2 and 3
              2 N     - displays bulletin 2 if, and only if, it is new
              B A N   - displays all new bulletins
              B A N D - using a batch protocol sends all new bulletins


(CHAT) or (NODE) Node CHAT - Function Help
------------------------------------------

Subcommands:  (#) (G) (A) (U)

              (#) is any other active Node Number
              (G) places you in Group CHAT with others
              (A) flags your Node as being available for CHAT (default)
              (U) flags your Node as being Unavailable for CHAT

Description:  Allows interactive keyboard conversation with one or more other
              system nodes.  To CHAT with only one other node, enter that
              node's number.  To CHAT with a group of nodes, enter (G).  If a
              Node is unavailable for CHAT, you will be advised of such.  If
              the Node requested is available, they will be informed of your
              request.  When entering (G)roup CHAT, only other Nodes which are
              already in Group CHAT will be advised that you have joined them.

              When in Node CHAT, the following subcommands are available:

              (Q), (E), (U), (H)

                  (Q) quits Node CHAT
                  (E) also quits Node CHAT
                  (U) displays the status of the other Nodes
                  (H) gives a quick display of these subcommands

              When conversing in Node CHAT, there can be delays between when
              you enter your text to the other person, and the time it takes
              them to respond.  Since text is only sent to the other Node when
              an (Enter) key or word-wrap occurs, there can be time periods of
              several seconds between text coming back to your screen.  Please
              WAIT until it is your turn to type!  End your text with a "/ga"
              or "/o" to indicate it is the other person's turn to type - and
              then WAIT!




(C)omment to Sysop - Function Help
----------------------------------

Subcommands:  NONE

Description:  Allows leaving a private message or comment to the system
              operator.

              See (E)nter a Message HELP file for information on how to
              actually enter and save your comment text.




(D)ownload a File - Function Help
---------------------------------

Subcommands:  (filename 1) (filename 2) (filename 3) (protocol) (gb or bye)

              (filename) any valid DOS filename may be used and more than one
                         filename may be entered if you choose to use a BATCH
                         protocol for the file transfer

              (protocol) is a letter from A-Z of the protocol desired
                         based on the protocols available

              (gb)       Either (gb) or (bye) may be entered on the command
              (bye)      line to indicate that you want the system to hang up
                         after it finishes the file transfer

Description:  Allows transferring a file from the system being called to your
              machine.

              There can be up to 26 different types of protocols available.  If
              you have not previously set a default protocol for the system you
              are calling, you will be asked for the protocol type each time
              you request a download.

              Ascii protocol transfers are only available on non-binary text
              files.  Filenames which have extensions of .EXE, .ARC, .COM,
              .WKS, etc.  can not be downloaded using Ascii protocol.

              Due to the wide range of protocols now available, it is suggested
              you check with the sysop of this system if you have a question on
              which protocols have been implemented and how to properly set
              your software protocols to match those of this system.

Selecting
Files:        Filenames do not need to be typed in completely in order for the
              system to locate the desired file.  A default filename extension
              is usually provided by the Sysop such as ".ZIP" so that if you
              request a file called TEST it will first search to see if a
              file called TEST.ZIP can be located and if not it will search for
              TEST and send which ever file it finds.

              In some cases this default extension can make it difficult to
              download a desired file.  For instance, if both TEST and TEST.ZIP
              exist on the system then typing "D TEST" will always result in
              downloading TEST.ZIP.  To download the file called TEST in this
              instance you would need to type TEST followed by a period with
              no extension like this:

                       D TEST.

              You may also locate files for download by using the * and ?
              wildcard characters - the same as those used by DOS to specify
              files.  See the examples below.


Batch
Downloads:    Some protocols allow you to download more than one file at a
              time.  Examples of this are the Ymodem and Ymodem/G protocols.
              Downloading more than one file at a time requires that you select
              a batch protocol on both your end and the host end of the
              connection.

              To select more than one file you must either enter (DB) as your
              download command or on the command line simply type more than one
              filename.  See the examples below.

Examples:     D TEST          - downloads TEST using the default protocol
              D TEST X        - downloads TEST using the Xmodem protocol
              D TEST1 TEST2 Y - downloads both TEST1 & TEST2 using Ymodem
              D TEST? G       - downloads both TEST1 & TEST2 using Ymodem/G
              D TEST*.*       - downloads any file starting with TEST




(D)ownload a File - Function Help
---------------------------------

Subcommands:  (filename 1) (filename 2) (filename 3) (protocol) (gb or bye)

              (filename) any valid DOS filename may be used and more than one
                         filename may be entered if you choose to use a BATCH
                         protocol for the file transfer

              (protocol) is a letter from A-Z of the protocol desired
                         based on the protocols available

              (gb)       Either (gb) or (bye) may be entered on the command
              (bye)      line to indicate that you want the system to hang up
                         after it finishes the file transfer

Description:  Allows transferring a file from the system being called to your
              machine.

              There can be up to 26 different types of protocols available.  If
              you have not previously set a default protocol for the system you
              are calling, you will be asked for the protocol type each time
              you request a download.

              Ascii protocol transfers are only available on non-binary text
              files.  Filenames which have extensions of .EXE, .ARC, .COM,
              .WKS, etc.  can not be downloaded using Ascii protocol.

              Due to the wide range of protocols now available, it is suggested
              you check with the sysop of this system if you have a question on
              which protocols have been implemented and how to properly set
              your software protocols to match those of this system.

Selecting
Files:        Filenames do not need to be typed in completely in order for the
              system to locate the desired file.  A default filename extension
              is usually provided by the Sysop such as ".ZIP" so that if you
              request a file called TEST it will first search to see if a
              file called TEST.ZIP can be located and if not it will search for
              TEST and send which ever file it finds.

              In some cases this default extension can make it difficult to
              download a desired file.  For instance, if both TEST and TEST.ZIP
              exist on the system then typing "D TEST" will always result in
              downloading TEST.ZIP.  To download the file called TEST in this
              instance you would need to type TEST followed by a period with
              no extension like this:

                       D TEST.

              You may also locate files for download by using the * and ?
              wildcard characters - the same as those used by DOS to specify
              files.  See the examples below.


Batch
Downloads:    Some protocols allow you to download more than one file at a
              time.  Examples of this are the Ymodem and Ymodem/G protocols.
              Downloading more than one file at a time requires that you select
              a batch protocol on both your end and the host end of the
              connection.

              To select more than one file you must either enter (DB) as your
              download command or on the command line simply type more than one
              filename.  See the examples below.

Examples:     D TEST          - downloads TEST using the default protocol
              D TEST X        - downloads TEST using the Xmodem protocol
              D TEST1 TEST2 Y - downloads both TEST1 & TEST2 using Ymodem
              D TEST? G       - downloads both TEST1 & TEST2 using Ymodem/G
              D TEST*.*       - downloads any file starting with TEST




(E)nter a Message - Function Help
---------------------------------

Subcommands:  NONE

Description:  Allows leaving a message to another person for them to read at a
              later date.

Full Screen
Editor:       After selecting (E), you will be asked if you want to use the
              Full Screen Editor.  To use the Full Screen Editor your software
              must be capable of interpreting ANSI cursor position commands.
              The default answer to the question will be NO if the system did
              not detect ANSI on your end or if you are in novice mode.

Addressing
the Message:  Then you will be prompted to enter the name of the person the
              message is being addressed to.  If the system operator has
              enabled message name verification on this system, the name
              entered will be checked against all names in the user's file to
              insure a proper match.  If the user's name is not found, or the
              user is not registered in the same conference or board area where
              the message is being left, you will be advised of such to avoid
              leaving a message to a non-existent individual.  However, a
              SOUNDEX search to locate a name that sounds like what you entered
              can be performed or you can override the verification and answer
              (C) to continue and use the name that you have entered which
              might be done to facilitate leaving a message to a group of
              people.  By not entering a username at the "To:" prompt, it will
              automatically address the message to "ALL".

              Brackets will be displayed either above the line or surrounding
              the area on the screen in which you are allowed to enter text.

Entering a
Subject:      Next, up to a 25 character subject must be entered.  If no
              subject is entered you will be returned to the main menu
              and command line prompt.

Message
Security:     A security prompt will next appear looking something like this:

                 Security:  (G)roup, (R)eceiver, (S)ender, (H)elp, (N)one

                 (N)one means that the message will be open for all to read.

                 (G)roup allows assigning a password to the message which
                    only other callers who know the common password will be
                    allowed to read the message.

                 (R)eceiver makes the message private to all except you - the
                    person leaving it - and the person to whom it is addressed.

                 (S)ender allows you to assign a password to the message so
                    that only you can kill it later.  This prevents the other
                    person to whom the message is addressed from killing it.

              Note that you can NOT assign (R)eceiver protection to a message
              which has been addressed to ALL.

All Messages
Private?      A message base can be set up such that all messages are initial
              flagged as private.  In this case the above security prompt is
              skipped and the message will be saved using (R)eceiver security
              so that only you and the person to whom the message is addressed
              can read it.

Entering a
Message:      After completing the above steps, you can enter your text.  Each
              line you enter will be preceeded by it's line number.  Up to 72
              characters per line is allowed.  Typing beyond the 72 character
              limit will cause your text to automatically "word-wrap" down to
              the next line.

Exiting the
Editor:       There are two modes in which text can be entered which you will
              have already chosen by the time you get to the editor.  One of
              them is the Line Editor mode where only one line at a time can
              be entered or edited and the other is Full Screen Editor mode
              in which the entire screen is used as the workspace for message
              entry.

              To exit the Line Editor, press (Enter) alone on a blank line.
              To exit the Full Screen Editor, press (ESC) or (Ctrl-U).

              After you exit the Line Editor or the Full Screen Editor you will
              be prompted for message completion subcommands as described
              below:


Message Completion Subcommands
------------------------------

A)brt,C)ont,D)el,E)dit,F)ullScr,H)elp,I)nsert,L)ist,Q)uote,S)ave,U)pldMsg

              (A)brt abandons or cancels your message entry.
              (C)ont allows you to continue using the Line Editor.
              (D)el allows you to delete a line of text from the message.
              (E)dit allows you to edit a line of text.
              (F)ull allows you to continue using the Full Screen Editor.
              (H)elp displays this Help file.
              (I)nsert allows inserting a line of text in front of another.
              (L)ist relists your text entry so far to the screen.
              (Q)uote allows you to quote a portion of the replied-to message.
              (S)ave actually writes the message to disk.
              (U)pld allows you to upload ASCII text without echo.
              (SC) allows saving the same message to another individual.
              (SK) save your message, kill replied to message (if applicable)
              (SN) save your message, skip redisplay of replied to message

              Note: The format to (E)dit a line of text is:

                  old text;new text

              where the "old text" is the text you wish to replace, followed by
              a ";" followed by the new text.  The old text search is case
              sensitive - so capital letters must match exactly.  If your new
              text causes that line to exceed 72 characters, the characters
              beyond 72 will be truncated from the line.

When "uploading" Ascii text to the message base, insure your text lines are 72
characters or less in length.

Note:  while in the full screen editor you can press CTRL-Z to get help on the
editing keys available in the full screen editor.



(F)ile Directories - Function Help
----------------------------------

Subcommands:  (#) (D) (G) (L) (N) (R) (U) (V) (Z) (NS)

              (#)  The directory number to view
              (A)  Display all directories
              (D)  Download a specific filename
              (G)  Goodbye
              (L)  Locate files by name (wildcards are okay)
              (N)  New files (locate files by date)
              (R)  Re-lists the directory menu
              (U)  Display upload directory
              (V)  View contents of a compressed file
              (Z)  Zippy DIR Scan (locate files by scanning for text)
              (NS) Displays request in non-stop mode

Description:  This command allows you to view a listing of the files available.
              After selecting (F), a listing of the file directories available
              will be shown - usually grouped by category.  To view one or more
              of the directory listing files, enter the number to view.
              Multiple listings can be viewed at the same time by entering
              several numbers at the same time.

              e.g.  F 1 2 10

              Also, a range of numbers can be entered be entered.

              e.g.  F 1 5-10 15-17

              By adding the (NS) non-stop parameter at the end of your request,
              the entire listing will be displayed with screen pauses every 23
              lines.

              You can use the (V)iew subcommand to view the files included in a
              compressed file listed in one of the directories.  If you elect
              to (D)ownload the file just (V)iewed, the filename of the Viewed
              file will automatically be carried forward as the download
              filename request unless over-ridden by you.

              Aditionally, you can request a download of a specific file from
              the (F)ile Subcommand prompt to avoid having to return to the
              main menu.

              Also, at any "More?" prompt shown while displaying a list of
              files available you can use the (F)lag command to flag a file
              for download.







(FLAG) Files for Download - Function Help
-----------------------------------------

Subcommands:  (filename 1) (filename 2) (filename 3) etc

              (filename) is the name of the file to be downloaded.  Multiple
                         names can be stacked on the same line and wildcards
                         may be used in the name.

Description:  The FLAG command is used to flag files or groups of files for
              later download.  For instance, you may be busy looking at a
              list of download files and find some that you want to download
              but don't wish to download them that very moment.  Rather than
              having to write down the name or try to remember it later you
              can simply tell the system to flag the file and remember it
              for you.

              To download the files that are flagged you would then issue a
              (D)ownload command at which point the system will ask you if you
              want to download the files that were flagged.  Answering NO
              will cause the system to forget the files that were flagged.

Examples:

  * FLAG test1

    Functioning the same as the download command, this command will first check
    to see if TEST1.<ext> exists where <ext> is the default extension for the
    system you are on.  For example, it will see if TEST.ZIP exists and if not
    it will attempt to flag TEST instead.

  * FLAG file1 file2 file3

    Flags all three files for download.

  * FLAG file*.txt

    Flags any files matchin file*.txt for later download.



(G)oodbye - Function Help
-------------------------

Subcommands:  NONE

Description:  Disconnects you from the host system.  This command should always
              be used to log off of the system to insure proper updating of all
              message pointers, etc.  NEVER just drop carrier by issuing an
              (Atl+X) (or equivalent) command to your communication's software
              without first entering the (G) command!

              Some systems also ask that you complete a (S)cript Questionnaire
              at the time of logoff.



(H)elp - Function Help
----------------------

Subcommands:  (A-Z) (CHAT) (DOOR)

              (A-Z) is any letter of the alphabet
              (CHAT) or (NODE) displays Node CHAT help file
              (DOOR) or (OPEN) displays DOOR help file

Description:  Displays the appropriate help file which corresponds with the
              command you need help with.  The software usually indicates that
              help is available by displaying a (H) option at the command line
              you are at.  Additionally, the code will also recognize a (?) in
              place of the letter (H) when requesting help.  If no help is
              available it will simply redisplay the command line prompt.




(I)nitial Welcome - Function Help
---------------------------------

Subcommands:  NONE

Description:  Redisplays the initial welcome screen, along with the version
              number of PCBoard which the system is running.




(J)oin a Conference - Function Help
-----------------------------------

Subcommands:  (#) or (Name)

              (#) is a valid conference number from 0 to the highest conference
                  number on the system

              (Name) is the name of any existing conference

Description:  Allows joining an active conference on the system.  The
              conference name or number to be joined can be included with the
              (J) command on the same line if desired.  If you are not
              registered in the conference requested, you will be advised of
              such and returned to the main command line prompt.

              The entering of either a "J 0" will function as if you did an
              (A)bandon command and return you to the main board message base
              area.

Examples:     J 1       - to join conference #1
              J SYSOPS  - to join the Sysops conference



(K)ill a Message - Function Help
--------------------------------

Subcommands:  (#)

              (#) is a valid active message number

Description:  Allows marking a message as inactive or killed so that others
              can no longer read it.  Additionally, when the system operator
              packs the message base, the message will be purged from the
              system.

              Entry of an invalid message number returns you to the main
              command line.



(L)ocate Files by Name - Function Help
--------------------------------------

Subcommands:  (filename/wildcard) (A) (D) (N) (U) (NS)

              (filename/wildcard) is the filename to scan for
              (A) scans all available file directories
              (D) download all files found
              (N) combine the search with a date scan
              (S) with (N) indicates new files since last date scanned
              (U) scans only the available upload file directories
              (NS) displays listing in non-stop mode

Description:  Allows you to search the file directory listings for filenames
              which match those you are looking for.  You can also use
              valid DOS wildcards in your filename request if you are unsure
              of the exact filename you are looking for.

Examples:     L TEST A       - search all directories for a file called TEST
              L TEST*.* A    - search all for any file beginning with TEST
              L TEST A D     - find TEST and download it
              L TEST*.* U    - find TEST*.* in the UPLOAD directory
              L TEST*.* N A  - find only new files matching TEST*.*

              Other examples of wildcards:  TEST?  TEST?.ZIP  ??TEST.*

NOTE:  If the filename is less than 8 characters long and no wildcards have
been used it automatically appends "*.*" to the name (i.e. searching for TEST
turns into TEST*.*).

If an invalid file is requested it will automatically switch to a Z)ippy search
command




(M)ode - Function Help
----------------------

Subcommands:  ANSI
              GRAPHICS
              CTTY

Description:  Switches your screen display mode between ANSI graphics and
              non-graphics mode.  If you toggle ANSI Graphics on, you must be
              using a communication's program which supports standard ANSI
              (Esc) code graphics.  If you select graphics and get a lot of
              symbols such as "[01;49m" on your screen mixed in with the normal
              text display, your software does not support ANSI graphics and
              you should toggle Graphics off by re-entering the (M) command.

Examples:

  * M <enter>

    This will TOGGLE the current graphics state on or off

  * M ANSI <enter>

    Enter ANSI mode - use ansi cursor movement but no ansi color graphics

  * M GRAPHICS <enter>

    Enter ANSI GRAPHICS mode

Note:  The system will automatically detect if you have ANSI capability and
your system supports the CURSOR POSITION REPORT sequence.  However, you still
must select whether or not you want the color graphics sent to you.




(N)ew Files by Date - Function Help
-----------------------------------

Subcommands:  (date) (A) (D) (S) (U) (NS)

              (date) is a valid date in mmddyy format (no spaces!)
              (A)  scans all file directory listings
              (D)  download all new files found
              (S)  scan for files new since your last logon's directory scan
              (U)  scans only upload file directory listings
              (NS) displays output in non-stop mode

Description:  Displays file listings based on a date scan of when the
              file was placed on the system.  Matching files are those
              found which have a date equal to or later than that requested.

              Entering an (S) indicates that the last DATE scan or the DATE
              of the most recent files found on your last scan should be used
              as the scan date.

              Entering a (D) on the command line will cause all files found
              to be queued up for download on your next (D)ownload command.

Examples:     N A S          - scan for all new files since last scan
              N U S          - scan for new files in the upload directory
              N 1 S D        - scan for and download new files in directory 1




NEWS File - Redisplay - Function Help
-------------------------------------

Subcommands:  None

Description:  Redisplays the NEWS file for the message base you are in.




(47 min. left) Main Board Command? h o

(O)perator Page - Function Help
-------------------------------

Subcommands:  NONE

Description:  Allows paging of the system operator to come to the host keyboard
              and enter an inter-active typing mode with you.  If the system
              operator is not available, a message will be displayed and you
              will be returned to the main menu.  You can abort the page in
              advance of the 30 second timeout period if desired by pressing
              (Ctrl-K).



(OPEN) a (DOOR) - Function Help
-------------------------------

Subcommands:  (#) or (Name)

              (#)    number of the DOOR to open
              (Name) name of the DOOR to open

Description:  A DOOR is an extension to the system.  A part of the system which
              is not built directly into the PCBoard Bulletin Board Software.

              Opening a DOOR takes you out of PCBoard and into another
              application.  Since there are dozens of DOOR applications
              available, you should check with your system operator for
              questions on which DOORs are operational and what they do.




(P)age Length - Function Help
-----------------------------

Subcommands:  (#)

              (#) is a valid number between 0 and 50

Description:  Allows setting of the number of display lines you want to
              appear on your screen before the software displays a
              "(H)elp, More?" prompt on your screen.

              If you select 0 as your page length, you will never pause during
              any screen display.  The default value for this command is 23
              lines per page.




(Q)uick Message Scan - Function Help
------------------------------------

Subcommands:  (#) (F) (Y) (S) (NS) (+) (-) (TS)

              (#) any number from 1 to 9999999
              (F) scans for message headers from you
              (Y) scans for message headers to you
              (S) scans for headers above those you have already read
              (NS) displays test in non-stop mode
              (+) or (-) appended to the end of a numbers forces the display
              to be shown in forward or reverse order respectively.
              (TS) search message headers for specific text
              (USER) selects only those message to or from the specified user

Description:  Allows viewing a quick description of the message header
              information available.  The display includes the message
              number, the message reference number (if any), who the message
              is to, who the mesage is from, and the subject matter of the
              message.  Due to screen width constraints, some fields are
              shortened for display purposes.  Messages which are protected
              from reading will not be displayed to you.




(R)ead Messages - Function Help
-------------------------------

Subcommands:

       (#)        a message number between 1 and 9999999
       (F)        selects only messages left by you
       (Y)        selects only messages left for you
       (YA)       selects only messages left for you or addressed to "ALL"
       (S)        selects messages above the last one you have read
       (A)        read messages in all SELECTed conferences
       (ALL)      read messages in all conferences in which you are registered
       (L)        read in backwards order from the last message to the first
       (C)        capture the messages to a file for download
       (D)        implies a (C)apture and immediately downloads
       (Z)        implies a (D)ownload but compresses the file before
       (G)        goodbye
       (J)        join another conference
       (Q)        display only message headers (quick scan mode)
       (U)        displays only messages that have not yet been read
       (NS)       displays text in non-stop mode
       (RM)       re-read previously "memorized" message number
       (RM+)      re-read "memorized" message number plus forward read
       (RM-)      re-read "memorized" message number plus backwards read
       (+)        alone reads messages forward from present position or when
                  appended to a number causes forward reading from that
                  message number
       (-)        alone reads messages backwards from present position or
                  when appended to a number causes backward reading from that
                  message number
       (TS)       searches messages for the specified search criteria
       (SET)      sets the number of the last message read
       (EDIT)     puts the current message into the editor for re-editing
       (NEXT)     reads next higher message number available
       (PREV)     reads next lower message number available
       (JUMP)     skips to the next conference on a (R)ead (A)ll command
       (SKIP)     sets the last message read pointer, skips to next conf.
       (USER)     selects only those message to or from the specified user
       (SELECT)   selects the current conference for future scans
       (DESELECT) deselects the current conference for future scans

Description:  Allows reading messages left on the system.  All public messages
              will be displayed, along with private messages left either by you
              or for you.  If a message has more display lines than what your
              (P)age Length is set for, a "(H)elp, More?" prompt will appear
              asking for your input.  Multiple message numbers to read can be
              entered on the same command line if desired.  Additionally,
              combinations of the above commands can be entered on the same
              command line if desired.

Examples:

  * R S <enter>

    The above command will read all mail that is new since you last read
    mail in this message base.

  * R Y S <enter>

    The above command will read all mail that is addressed to you that is new
    since you last read mail in this message base.

  * R 1+ <enter>

    The above command will read all messages from #1 to the end.

  * R 1 5 10 20 <enter>

    The above command will read messages 1, 5, 10 and 20 and then stop.


  * R L <enter>

    The above command will read all mail in reverse order from beginning to
    end.

  * TS A 1+ <enter>
    PCBoard & LANtastic <enter>

    The above commands will search thru every available message in ALL
    conferences areas you are set to scan for any message that has both
    the word "PCBoard" AND the word "LANtastic" in it.

  * TS A 1+ <enter>
    PCBoard & (LANtastic | DESQview) <enter>

    The above commands will search thru every available message in ALL
    conferences areas you are set to scan for any message that has both
    the word "PCBoard" AND either the word "LANtastic" OR the word
    "DESQview" in it.

    The parenthesis tell PCBoard how you want to group your criteria if
    you have a complex search request such as the one above.  It will
    allow for nearly any number of parens and any combination of AND's
    (using the "&" character) and OR's (using the "|" character).

  * TS A 1+ USER JOHN DOE <enter>
    PCBoard & Help <enter>

    The above command (similar to examples above) adds the keyword USER
    to the command line specifying that only messages that are either
    TO or FROM John Doe should be displayed if they are found to have
    both the words PCBoard and Help in them.

  * R A Z <enter>

    The above command will capture all messages in all conferences since
    the last message read, compress the capture file and the begin the
    download procedure.

  * R SET 100 <enter>

    Sets the last message read for that conference to 100.




(REPLY) To Messages - Function Help
---------------------------------

Subcommands:  (#)

              (#) a message number between 1 and 9999999

Description:  Allows replying directly to another message from the main command
              line.  Message numbers can be stacked together if desired.



(RM) Read Marked Message - Function Help
----------------------------------------

Subcommands:  None

              While there are no subcommands the RM function can take any of
              three separate forms:

              RM   Read the marked message and stop
              RM+  Read the marked message then continue going forward
              RM-  Read the marked message then continue going backward

Description:  When reading messages you can use the (M)ark Message command to
              tell the system to remember that number for you so that you can
              easily go back to it.  To return to that Marked Message you
              simply issue one of the above three RM commands.

Tips:         To redisplay and possibly capture the message you are currently
              reading you could issue a command such as this:

                   M RM NS

              It first marks the message you are reading, then it re-reads that
              message in NON-STOP mode.  Another form of the same thing if
              you wanted to re-read that message and then keep going would be:

                   M RM+

              NOTE:  You must be in the conference where you marked the message
              in order for the system to properly locate it.




(S)cript Questionnaire - Function Help
--------------------------------------

Subcommands:  NONE

              A script questionnaire is a set of questions that the system
              operator has set up where the answers that you provide will be
              recorded in a file for later analysis or processing.

              If no questionnaires have been defined, you will be told such and
              returned to the main command line.  If scripts are present, you
              will be displayed a menu of them, including a number of the
              choices available.  To complete a script, enter the number
              indicated.

              After selecting a valid number, you will be displayed a brief
              description of the what the questionnaire is for and asked
              whether or not you wish to continue.  If you indicate (Y)es, the
              script will begin execution.  During execution, you will be
              displayed a prompt of one or more lines which will ask you a
              question, followed by an input field in which you can enter your
              response.  You are limited to a one line response for each
              question asked.  Responses can not be longer than the brackets
              shown above the input line.  Attempting to exceed the input
              length will cause the host to send you a BEEP and will pause
              awaiting either the shortening of your reponse or the pressing of
              your (Enter) key.




(T)ransfer Protocol - Function Help
-----------------------------------

Subcommands:  (A-Z)

              (A-Z) is a valid protocol defined to that system

Description:  Allows setting of a default transfer protocol.  The choices of
              protocols available will vary from system to system based on the
              protocols which the system operator has enabled.  A default of
              (N)one can also be entered, in which case you will be asked to
              specify the protocol type each time you begin either an upload or
              download from the system.  If you specify a value here, it will
              be used as the default each time you request a file transfer.
              However, this default can be over-ridden at the time of a file
              transfer request by including the protocol desired as a separate
              entry on the same line as the filename is entered.  (i.e.
              (filename) (F) would over-ride any default here as specifying
              1K-Xmodem Full-Flow protocol.)



(TS) Message Text Search - Function Help
----------------------------------------

Subcommands:

           (F)    selects only messages left by you
           (Y)    selects only messages left for you
           (S)    selects messages above the last one you have read
           (A)    scan messages in all SELECTed conferences
           (ALL)  scan messages in all conferences in which you are registered
           (L)    read in backwards order from the last message to the first
           (C)    capture the messages found to a file for download
           (D)    implies a (C)apture and immediately downloads
           (Z)    implies a (D)ownload but compresses the file before
           (NS)   displays text in non-stop mode
           (RM+)  re-read "memorized" message number plus forward read
           (RM-)  re-read "memorized" message number plus backwards read
           (##+)  scan messages from a selected number forward
           (##-)  scan messages from a selected number backward
           (USER) selects only those message to or from the specified user

Description:  Allows searching the messages on the system to find messages
              that match the search criteria that you provide.

Examples:

  * TS A 1+ <enter>
    PCBoard & LANtastic <enter>

    The above commands will search thru every available message in ALL
    conferences areas you are set to scan for any message that has both
    the word "PCBoard" AND the word "LANtastic" in it.

  * TS A 1+ <enter>
    PCBoard & (LANtastic | DESQview) <enter>

    The above commands will search thru every available message in ALL
    conferences areas you are set to scan for any message that has both
    the word "PCBoard" AND either the word "LANtastic" OR the word
    "DESQview" in it.

    The parenthesis tell PCBoard how you want to group your criteria if
    you have a complex search request such as the one above.  It will
    allow for nearly any number of parens and any combination of AND's
    (using the "&" character) and OR's (using the "|" character).

  * TS A 1+ USER JOHN DOE <enter>
    PCBoard & Help <enter>

    The above command (similar to examples above) adds the keyword USER
    to the command line specifying that only messages that are either
    TO or FROM John Doe should be displayed if they are found to have
    both the words PCBoard and Help in them.




(U)pload a File - Function Help
-------------------------------

Subcommands:  (filename 1) (filename 2) (filename 3) (protocol) (gb or bye)

              (filename) any valid DOS filename may be used and more than one
                         filename may be entered if you choose to use a BATCH
                         protocol for the file transfer

              (protocol) is a letter from A-Z of the protocol desired
                         based on the protocols available

              (gb)       Either (gb) or (bye) may be entered on the command
              (bye)      line to indicate that you want the system to hang up
                         after it finishes the file transfer

Description:  Allows transferring a file from your machine to the host system.

              There can be up to 26 different types of protocols available.  If
              you have not previously set a default protocol for the system you
              are calling, you will be asked for the protocol type each time
              you request a download.

              Ascii protocol transfers are only available on non-binary text
              files.  Filenames which have extensions of .EXE, .ARC, .COM,
              .WKS, etc.  can not be downloaded using Ascii protocol.

              Due to the wide range of protocols now available, it is suggested
              you check with the sysop of this system if you have a question on
              which protocols have been implemented and how to properly set
              your software protocols to match those of this system.

Selecting
Files:        Unlike downloading a filename must be specified exactly as you
              intend to send it.  In other words, if you type the word "TEST"
              then the name of the file when posted will be called "TEST" with
              no other extension added to it.

              After giving the system one or more filenames to be uploaded it
              will ask you for a description of each file.  Your description
              can be up to 8 lines long of 45 characters each.  If you wish to
              make a particular file PRIVATE so that it is not posted in the
              public upload directory you simply place a "/" at the beginning
              of the first line of text in your description.

Batch
Uploads:      When uploading a batch of files you must enter at least ONE
              filename even if it is a dummy filename.  Then on your end you
              simply tell your software to send all of the desired files.  Any
              files that are received which you did not specify originally
              will then be brought up on the screen with the system asking you
              to describe each of them.

              To send more than one file you must either enter (UB) as your
              upload command or on the command line simply type more than one
              filename.  See the examples below.

Examples:     U TEST          - uploads TEST using the default protocol
              U TEST X        - uploads TEST using the Xmodem protocol
              U TEST1 TEST2 Y - uploads both TEST1 & TEST2 using Ymodem/BATCH




(U)pload a File - Function Help
-------------------------------

Subcommands:  (filename 1) (filename 2) (filename 3) (protocol) (gb or bye)

              (filename) any valid DOS filename may be used and more than one
                         filename may be entered if you choose to use a BATCH
                         protocol for the file transfer

              (protocol) is a letter from A-Z of the protocol desired
                         based on the protocols available

              (gb)       Either (gb) or (bye) may be entered on the command
              (bye)      line to indicate that you want the system to hang up
                         after it finishes the file transfer

Description:  Allows transferring a file from your machine to the host system.

              There can be up to 26 different types of protocols available.  If
              you have not previously set a default protocol for the system you
              are calling, you will be asked for the protocol type each time
              you request a download.

              Ascii protocol transfers are only available on non-binary text
              files.  Filenames which have extensions of .EXE, .ARC, .COM,
              .WKS, etc.  can not be downloaded using Ascii protocol.

              Due to the wide range of protocols now available, it is suggested
              you check with the sysop of this system if you have a question on
              which protocols have been implemented and how to properly set
              your software protocols to match those of this system.

Selecting
Files:        Unlike downloading a filename must be specified exactly as you
              intend to send it.  In other words, if you type the word "TEST"
              then the name of the file when posted will be called "TEST" with
              no other extension added to it.

              After giving the system one or more filenames to be uploaded it
              will ask you for a description of each file.  Your description
              can be up to 8 lines long of 45 characters each.  If you wish to
              make a particular file PRIVATE so that it is not posted in the
              public upload directory you simply place a "/" at the beginning
              of the first line of text in your description.

Batch
Uploads:      When uploading a batch of files you must enter at least ONE
              filename even if it is a dummy filename.  Then on your end you
              simply tell your software to send all of the desired files.  Any
              files that are received which you did not specify originally
              will then be brought up on the screen with the system asking you
              to describe each of them.

              To send more than one file you must either enter (UB) as your
              upload command or on the command line simply type more than one
              filename.  See the examples below.

Examples:     U TEST          - uploads TEST using the default protocol
              U TEST X        - uploads TEST using the Xmodem protocol
              U TEST1 TEST2 Y - uploads both TEST1 & TEST2 using Ymodem/BATCH




(WHO) is Online - Function Help
-------------------------------

Subcommands:  None

Description:  On multinode systems this command displays the name and location
              of users that are currently online on all of the nodes in the
              system.




(V)iew User Settings - Function Help
------------------------------------

Subcommands:  NONE

Description:  Allows viewing your current user settings.  Included in the
              listing are:

              The number of system caller you are
              Your Default Page Length
              Your System Expiration Date (or NONE)
              Your Security Level
              Your Last Date On
              The last message number you read
              The current high message number
              Number of Active Messages
              Available download bytes available for that day
              Default Transfer Protocol Selected

Additional Display
------------------
If you have sysop privileges, the following additional items will be shown:

              Low Message Number
              Number of Messages Defined
              Number of Free Message Slots Available

The above displays are made to those with sysop privileges so that decisions
can be made as to when to pack that message base and/or to define additional
message blocks for storing messages.



(W)rite User Data Base Information - Function Help
--------------------------------------------------

Subcommands:  NONE

Description:  Allows changing some of your data base information stored
              on that system, including:

              Password desired
              Location you are calling from
              Your Business/Data Phone Number
              Your Home/Voice Phone Number
              A Comment Field of 30 characters
              Choice of having the screen cleared before reading a message
              The Message base areas you want to scan with the "Y A" command

              If the system operator has restricted you to only password
              changes instead of all of the above, you will only be allowed
              to change it and not the other items listed.




(X)Expert/Novice Mode Toggle - Function Help
--------------------------------------------

Subcommands:  ON
              OFF

Description:  The (X) command lets you toggle between Expert and Novice
              mode.  When the Expert mode is active, the main menu is
              never displayed, and most command line prompts are
              considerably abbreviated.

              In Novice mode, all menus are displayed and all command line
              prompts give a more descript definition of the commands
              available.

Examples:

  * X <enter>

    Toggles expert mode on or off

  * X ON <enter>

    Enters EXPERT mode

  * X OFF <enter>

    Enters NOVICE mode



(Y)our Mail Check - Function Help
---------------------------------

Subcommands:  (A) (S) (NS) (+) (-) (C) (ALL)

              (A)   scans all SELECTed conference message bases
              (ALL) scans all conferences in which you are registered
              (S)   scans only for mail left since the last message read
              (C)   limits scan to current message base only
              (+)   or (-) forces the direction of the scan
              (Q)   display in Quick Scan format
              (L)   display in Long Scan format
              (NS)  displays text output in non-stop mode

Description:  Allows checking for mail left to you or from you in a message
              base.  The above commands can be entered in combination on the
              same line to limit the scan function as desired.  The default for
              the (Y) command is to scan the current message base only, in
              reverse direction, checking for mail left by you as well as for
              mail addressed to you and to scan the complete message base, from
              the end of the file to the beginning.

              You can select which areas you want to be scanned when using the
              (A) subcommand by typing SELECT or by using the (W)rite User Info
              command.

Quick Scan:   The Quick Scan format provides a display that looks something
              like this:
                                Messages  Messages
              Num   Conference   To You    Found
              ---   ----------  --------  --------
                0   Main Board         0        18
                1   Support            5        35
                2   DOOR               2        14

Long Scan:    The Long Scan format provides more detail such as message numbers
              found and looks something like this:

              Scanning Main Board
                Msgs For You: None
               Msgs From You: None
                # Msgs Found: 18

              Scanning Support (1) Conference
                Msgs For You: 100 101 102 103 104
               Msgs From You: 89 94
                # Msgs Found: 0

              Scanning DOOR (2) Conference
                Msgs For You: 25 48
               Msgs From You: None
                # Msgs Found: 0




(Z)ippy Directory Listing Scan - Function Help
----------------------------------------------

Subcommands:  (text) (#) (A) (D) (N) (U) (NS)

              (text) is the text you wish to search for
              (#)    is any valid directory number
              (A)    scans all directory listings for the text input
              (D)    download all files found
              (N)    combine the search with a date scan
              (S)    with (N) indicates new files since last date scanned
              (U)    scans only the upload directory(s) for the text
              (NS)   displays screen output in non-stop mode

Description:  Allows you to search the download directories for words or
              phrases either in the filename itself or in the description of
              the files.  See examples below.

              (D) will cause all files found to be flagged for later download
                  the next time you issue a (D)ownload command.

              (N) combines a new files search with the text search.

Examples:

  * Z A PCBoard <enter>

    The above command will search all of the file directories for the word
    "PCBoard" (anywhere - the filename, the description or even the extended
    description lines).

  * Z A <enter>
    PCBoard & DESQview <enter>

    The above commands will search all of the file directories for any file
    that has both the word "PCBoard" and the word "DESQview" in the
    description.

  * Z PCBoard A N <enter>
    120189 <enter>

    The above command combines a text search for the word PCBoard with a date
    search of 12/01/89 or later in search all of the download directories.

  * Z DESQview A S D <enter>

    The above command combines the Zippy Search of the file directories with a
    "new files since" search and then flags all files found for later
    downloading.



(SELECT) Conferences to Scan - Function Help
--------------------------------------------

Subcommands:  (S) (D) (#) (#-#)

              (S)   selects ALL conferences
              (D)   deselects ALL conferences
              (#)   toggles a specific conference on or off
              (#-#) toggles a range of conferences on or off

Description:  The SELECT function is used to tell the system which conferences
              you are interested in (or not interested in).  It affects the
              scanning of conferences when reading or searching for mail.

              The command can also be used to reset the Last Message Read
              pointers in each of the conferences selected.

Examples:

  * SELECT S <enter>

    The above command would select ALL conferences to be scanned or read.

  * SELECT 1 <enter>

    If conference #1 was already selected then it is turned off.  If it was
    not already selected then it will be turned on and you will be prompted
    for a new Last Message Read number for that conference.

  * SELECT D 1-3 6 <enter>

    The above command starts out by deselecting all conferences after which
    it reselects conferences 1 thru 3 followed by 6.  It will then prompt
    the caller for any last message read changes in each of the newly
    selected conferences.


