This feature subdivides a facet into three or four facets.
|
|
Quadrangular tessellation |
Triangular tessellation |
Usage:
1. Click on the object you want to work with using the Wand.
2. Select the Tessellate tool in the “More tools” menu.
The Hand cursor is displayed.
3. You can perform a tessellation of all the facets.
press the Return key once you have selected the tool.
4. Switching from one tessellation mode to another.
Press the spacebar to switch from a triangular tessellation to a quadrangular tessellation and back.
Switching mode will modify all the operations performed with the tool, depending on the mode selected. (That is, tessellating in one mode and then switching mode to tessellate another facet will modify the previous tessellated facet to be tessellated with the current mode.)
5. Click on the facet you wish to tessellate.
Tessellated facets are displayed one after another.
You can go back to step 4 if necessary.
6. Ending the tool action.
Validate or put the tool aside to end the tool action (depending on the interface). See chapter User Manual/Tools/Generic use of a tool/How do you end a tool action?
