IViewObject::Draw

Draws a representation of an object onto the specified device context.

HRESULT Draw(

DWORD dwAspect,

//Aspect to be drawn

LONG lindex,

//Part of the object of interest in the draw operation

void * pvAspect,

//Pointer to DVASPECTINFO structure or NULL

DVTARGETDEVICE * ptd,

//Pointer to target device in a structure

HDC hicTargetDev,

//Information context for the target device

HDC hdcDraw,

//Device context on which to draw

const LPRECTL lprcBounds,

//Pointer to the rectangle in which the object is drawn

const LPRECTL lprcWBounds,

//Pointer to the window extent and window origin when drawing a metafile

BOOL (*) (DWORD) pfnContinue,

//Pointer to the callback function for canceling or continuing the drawing

DWORD dwContinue

//Value to pass to the callback function

);

Parameters

dwAspect: [in] Specifies the aspect to be drawn, that is, how the object is to be represented. Representations include content, an icon, a thumbnail, or a printed document. Valid values are taken from the enumerations DVASPECT and DVASPECT2. Note that newer objects and containers that support optimized drawing interfaces support the DVASPECT2 enumeration values. Older objects and containers that do not support optimized drawing interfaces may not support DVASPECT2. Windowless objects allow only DVASPECT_CONTENT, DVASPECT_OPAQUE, and DVASPECT_TRANSPARENT.
lindex: [in] Portion of the object that is of interest for the draw operation. Its interpretation varies depending on the value in the dwAspect parameter. See the DVASPECT enumeration for more information.
pvAspect: [in] Pointer to additional information in a DVASPECTINFO structure that enables drawing optimizations depending on the aspect specified. Note that newer objects and containers that support optimized drawing interfaces support this parameter as well. Older objects and containers that do not support optimized drawing interfaces always specify NULL for this parameter.
ptd: [in] Pointer to the DVTARGETDEVICE structure that describes the device for which the object is to be rendered. If NULL, the view should be rendered for the default target device (typically the display). A value other than NULL is interpreted in conjunction with hicTargetDev and hdcDraw. For example, if hdcDraw specifies a printer as the device context, the ptd parameter points to a structure describing that printer device. The data may actually be printed if hicTargetDev is a valid value or it may be displayed in print preview mode if hicTargetDev is NULL.
hicTargetDev: [in] Information context for the target device indicated by the ptd parameter from which the object can extract device metrics and test the device’s capabilities. If ptd is NULL; the object should ignore the value in the hicTargetDev parameter.
hdcDraw: [in] Device context on which to draw. For a windowless object, the hdcDraw parameter should be in MM_TEXT mapping mode with its logical coordinates matching the client coordinates of the containing window. For a windowless object, the device context should be in the same state as the one normally passed by a WM_PAINT message.
lprcBounds: [in] Pointer to a RECTL structure specifying the rectangle on hdcDraw and in which the object should be drawn. This parameter controls the positioning and stretching of the object. This parameter should be NULL to draw a windowless in-place active object. In every other situation, NULL is not a legal value and should result in an E_INVALIDARG error code. If the container passes a non-NULL value to a windowless object, the object should render the requested aspect into the specified device context and rectangle. A container can request this from a windowless object to render a second, non-active view of the object or to print the object.
lprcWBounds: [in] If hdcDraw is a metafile device context, pointer to a RECTL structure specifying the bounding rectangle in the underlying metafile. The rectangle structure contains the window extent and window origin. These values are useful for drawing metafiles. The rectangle indicated by lprcBounds is nested inside this lprcWBounds rectangle; they are in the same coordinate space.
If hdcDraw is not a metafile device context; lprcWBounds will be NULL.
pfnContinue: [in] Pointer to a callback function that the view object should call periodically during a lengthy drawing operation to determine whether the operation should continue or be canceled. This function returns TRUE to continue drawing. It returns FALSE to stop the drawing in which case IViewObject::Draw returns DRAW_E_ABORT.
dwContinue: [in] Value to pass as a parameter to the function pointed to by the pfnContinue parameter. Typically, dwContinue is a pointer to an application-defined structure needed inside the callback function.

Return Values

This method supports the standard return values E_INVALIDARG and E_OUTOFMEMORY, as well as the following:

S_OK: The object was drawn successfully.
OLE_E_BLANK: No data to draw from.
DRAW_E_ABORT: Draw operation aborted.
VIEW_E_DRAW: Error in drawing.
DV_E_LINDEX: Invalid value for lindex; currently only -1 is supported.
DV_E_DVASPECT: Invalid value for dwAspect.
OLE_E_INVALIDRECT: Invalid rectangle.

Remarks

A container application issues a call to IViewObject::Draw to create a representation of a contained object. This method draws the specified piece (lindex) of the specified view (dwAspect and pvAspect) on the specified device context (hdcDraw). Formatting, fonts, and other rendering decisions are made on the basis of the target device specified by the ptd parameter.

There is a relationship between the dwDrawAspect value and the lprcbounds value. The lprcbounds value specifies the rectangle on hdcDraw into which the drawing is to be mapped. For DVASPECT_THUMBNAIL, DVASPECT_ICON, and DVASPECT_SMALLICON, the object draws whatever it wants to draw, and it maps it into the space given in the best way. Some objects might scale to fit while some might scale to fit but preserve the aspect ratio. In addition, some might scale so the drawing appears at full width, but the bottom is cropped. The container can suggest a size via IOleObject::SetExtent, but it has no control over the rendering size. In the case of DVASPECT_CONTENT, the Draw implementation should either use the extents given by IOleObject::SetExtent or use the bounding rectangle given in the lprcBounds parameter.

For newer objects that support optimized drawing techniques and for windowless objects, this method should be used as follows:

New drawing aspects are supported in dwAspect as defined in DVASPECT2.
The pvAspect parameter can be used to pass additional information allowing drawing optimizations through the DVASPECTINFO structure.
The Draw method can be called to redraw a windowless in-place active object by setting the lrpcBounds parameter to NULL. In every other situation, NULL is an illegal value and should result in an E_INVALIDARG error code. A windowless object uses the rectangle passed by the activation verb or calls IOleInPlaceSite::SetObjectRects instead of using this parameter. If the container passes a non-NULL value to a windowless object, the object should render the requested aspect into the specified device context and rectangle. A container can request this from a windowless object to render a second, non-active view of the object or to print the object. See the IOleInPlaceSiteWindowless interface for more information on drawing windowless objects.
For windowless objects, the dwAspect parameter only allows the DVASPECT_CONTENT, DVASPECT_OPAQUE, and DVASPECT_TRANSPARENT aspects.
For a windowless object, the hdcDraw parameter should be in MM_TEXT mapping mode with its logical coordinates matching the client coordinates of the containing window. For a windowless object, the device context should be in the same state as the one normally passed by a WM_PAINT message.

To maintain compatibility with older objects and containers that do not support drawing optimizations, all objects, rectangular or not, are required to maintain an origin and a rectangular extent. This allows the container to still consider all its embedded objects as rectangles and to pass them appropriate rendering rectangles in IViewObjectEx::Draw.

An object’s extent depends on the drawing aspect. For non-rectangular objects, the extent should be the size of a rectangle covering the entire aspect. By convention, the origin of an object is the top-left corner of the rectangle of the DVASPECT_CONTENT aspect. In other words, the origin always coincides with the top-left corner of the rectangle maintained by the object’s site, even for a non-rectangular object.

Note to Callers

The value of hicTargetDevice is typically an information context for the target device. However, it may be a full device context instead.

Note to Implementers

If you are writing an object handler (such as the default handler) that implements IViewObject::Draw by playing a metafile, you have to treat SetPaletteEntries metafile records in a special way because of Windows’ behavior. The Windows function PlayMetaFile sets these palette entries to the foreground. You must override this default by setting them to the background palette. Use EnumMetaFile to do this. Enhanced metafiles are always recorded with the background palette so there is no need to do it manually.

DWORD dwAspect,	//Aspect to be drawn
LONG lindex,	//Part of the object of interest in the draw operation
void * pvAspect,	//Pointer to DVASPECTINFO structure or NULL
DVTARGETDEVICE * ptd,	//Pointer to target device in a structure
HDC hicTargetDev,	//Information context for the target device
HDC hdcDraw,	//Device context on which to draw
const LPRECTL lprcBounds,	//Pointer to the rectangle in which the object is drawn
const LPRECTL lprcWBounds,	//Pointer to the window extent and window origin when drawing a metafile
*BOOL () (DWORD)** pfnContinue,	//Pointer to the callback function for canceling or continuing the drawing
DWORD dwContinue	//Value to pass to the callback function
);