About Big Brother

Dedicated to Kundel

Big Brother is a program designed to monitor your IP-network activities. it gives you a comprehensive picture of what happened to any point on the Net that you put in. Just add this point by specifying it’s IP address or hostname and optional short description (for you information only).

The hosts are organized into a hierarchical tree so that you may configure your network picture according to your needs and imagination. Most of the father host properties are inherited by his children unless you wish to specify child’s settings explicitly.

Every specified period of time Big Brother will send echo request to every host. And wait for response for at most specified timeout.

Results are presented in a graphical form in the lower pane. Each line of the lower window is related to specific host which is shown on the tooltip when you move your mouse over the graphics. Host activities are also logged into file.

Your current preferences  and network tree are automatically saved on Windows shutdown (unless specified otherwise) and may be autosaved every specified amount of minutes. Most recently used file is automatically loaded at Big Brother‘s startup unless you don’t want it.

You can also hide Big Brother into your notify tray so that it won’t occupy more than 16x16 square of your precious windows’ desktop. Just click [image] in your notify tray or select View/Main Window from menu. Click [image] again to restore Big Brother to its full size.

We are constantly adding new features to our software so your questions and/or comments are very welcome at gefilte@klever.net

Enjoy!

This software is free for use and distribution as long as developers' credits are explicitly mentioned.

The credits should read as follows:

developed by: Klever Co. (http://www.klever.net/)

Author: Michael Krelin (hacker@klever.net)

Copyright 1997 Klever Co.

Fan mail send to gefilte@klever.net


Using Big Brother

Using Big Brother consists of two parts - designing your network tree and monitoring it’s activity. The latter takes no effort of yours.

To design the network layout is to put your hosts into Network Tree pane. To add a child host to the current just press insert or Select Brothers/Add child from menu. To add a brother of the current host select Brothers/Add brother from menu. (note: You can’t add brother to the root node)

You may also show properties dialog box by selecting View/Host Properies menu. Properties dialog box also pops up automatically whenever you press Enter in the tree view pane.

Monitoring your network activities is even easier. You just relax and watch the screen (or listen to your speakers if you have ones). Network activities are reflected using the lower host activity pane and icons in the tree view. The possible states of the host are:

  Network - you haven’t specified host name or ip address for this host. The only reason that makes sense is that you probably want to use this node as a father for family of hosts

  In progress - checking of this host is in progress

  Reachable host - this host is reachable and you have no reason to worry about it.

  Worrysome host  this host was reported as unreachable, but less than for specified retries times.

  Unreachable host - this host is known as unreachable for a long time. Whenever the host enters or leaves this state specified actions are taken

Lower pane shows a histogram of response times for a specified amount of time. Histograms are shown for current host and it’s descendants. Hidden (collapsed) children are not shown in activity pane. When you move your mouse over histogram tooltip shows the host name and host address for the corresponding host. If you also hold left mouse button or Ctrl key it will also show you the time corresponding to the point you point at. If you hold Shift key it will also show the Round Trip Time.

Histogram shows the Round Trip Time in the following colours:

  Host’s response time is less than 1/3 of the specified timeout.

  Host’s response time is more than 1/3, but less then 2/3 of the specified timeout.

  Host’s response time is more than 2/3 of the specified timeout.


Preferences

The Preferences dialog box allows you to change global system preferences which are:

On windows shutdown save without confirmation  -  you may specify how does Big Brother act on windows shutdown, whether to save current tree without a confirmation or not.

Autosave  -  the interval at with Big Brother will save current tree automatically. Specify 0 if you don’t want to use this feature.

Ping data packet size  -  the size of echo request packet in bytes.

Ping .. hosts simultaneously  -  number of hosts to ping at a time. If you have a big network to monitor and have a slow computer or connection, you may want to limit number of hosts to ping simultaneously.

Log to file  -  Here is where you specify the name of the file to log hosts activities to.

Show last .. minutes in activity pane  -  This is the time length of your graphical pane window.


Host Properties

You may show/hide Host Properties dialog box using this menu command

Host Properties dialog box consists of three tabs. See General tab, Settings tab and Action tab for further details.


Add new host (child to current)

You can add new host into your network using this menu command. New host will be the child to current.


Autoload

You may specify whether you want Big Brother to load most recently used file at the startup or not.


Action

Using action tab of host properties dialog box you may specify the actions to be taken whenever host changes its state from up to down and vice versa.

Override action  -  You may specify if you want this host to specify some specific actions to take or if you want it to act as it’s parent does.

Going down  -  Actions to take whenever host goes down (is known as unreachable for retries times in a row). See below for details.

Going up  -  Actions to take whenever host becomes reachable after it is considered to be down.

Possible actions are:

Play a sound  -  Plays a sound. You may specify a .wav file or use one of the predefined sounds which are

(host-up)	Default sound indicating host recovering from crash

(host-down)	Default sound indicating crashing host

(system-ok)	System sound as defined in Control Panel/Sounds ‘Asterisk’

(system-critical)	System sound as defined in Control Panel/Sounds ‘Critical Stop’

Run custom program  -  Run custom program. The following special sequences are defined:

%h	Host name

%d	Host description

%%	% sign


Main Window

You may hide Big Brother’s main window using this command. You may get the window back by clicking the [image] in your notification tray area.


General tab

General tab of Host Properties dialog box lets you specify the following:

Host  -  either host name or ip address of host you want to monitor.

Description  -  a short description of the host. The name you want to refer to this host by in the future.

Log Activity  -  You may specify if you do or don’t want to log changes of this host’s state into file


Pause

This command lets you temporarily disable monitoring of hosts. Big Brother will just sit and wait until you let him do his work.


Settings Tab

Settings tab of Host Properties dialog box lets you specify the following:

Ping intervals  -  check this if you want to specify intervals for this host explicitly. If you don’t - this host will use parent’s settings. You can’t uncheck this for root node.

When the host is known as reachable  -  time to wait until next ping if the last ping succeeded.

When the host is known as unreachable  -  time to wait until next ping If the last ping failed.

Maximum ping reply timeout  -  amount of milliseconds to wait for echo reply.

Maximum retries count  -  number of failed pings before Big Brother considers the host is down.


Delete

Use this feature to remove current host and all of its children. You can’t remove the root node, although you may remove all hosts but root using this command.


Add new host (brother to current)

You can add new host into your network using this menu command. New host will be a brother to current. (note: You can’t add brother to the root node)


New

Create the whole new network tree. This command will remove all hosts you currently have.


Open

Open previously saved network file.


Save

Save your current network layout to disk file for future retrieval


Save as

Save your current network layout under different name.


Exit

Leave Big Brother. you will be prompted if you have unsaved information.


Toolbar

Use this command to hide or show toolbar.


Status bar

Use this command to hide or show status bar.


Adjust Splitter

Adjust position of splitter between tree view pane and host activity pane


Help Topics

Show help topics.


Most Recently Used Files

The menu commands right before the Exit allows you to quickly retrieve one of the most recently used files.


Big Brother Activity indicator

Big Brother activity indicator is a small red triangle spinning and turning to black whenever Big Brother is busy pinging hosts.


Status bar

Sometimes you may see some useful messages in there. For instance, long descriptions of menu items whenever you are exploring the menu.


Context help

Move mouse cursor with question mark wherever you want and get help for something you click on.


Maximize

This option will maximize Big Brother window to full screen.


Move

This option will let you move Big Brother window around the screen.


Size

This option will let you resize Big Brother’s window


Restore

You option may use this to restore Big Brother’s window to its original size after you’ve maximized it.


Close

This option does about the same as the Exit menu command does.


Add new host

You may add new hosts for monitoring in two ways - by adding it as a child or as a brother to current one.


Tree view pane:

  Network - no particular host specified.

  In progress - host is being checked.

  Reachable host - host is reachable.

  Worrysome host - host is dying.

  Unreachable host - host is unreachable.

Activity pane:

  Good response time

  Average response time

  Critical response time