Manual Configuration


Mac 0S/8 Configuration
We know you are eager to install your new software and begin exploring the Internet, but before you get started, please take a few minutes to read this short guide. It contains relevant information for a smooth installation and configuration of the software. You should have your TPG Internet Invoice or Voucher with you, which has your username & password, as well as other Setup Configuration details you will require.

Step 1: Setting Up A Modem In Mac 0S/8
Go to the Apple Menu and select Control Panel

PPP Settings:

  1. Click on Registered user, and put in your Name, Password, select Save Password and put in the Phone Number of the area you are connecting to.
  2. Click on the Options button
  3. Under the Connection Tab select Connect automatically when starting TCP/IP applications
  4. Select the Protocol Tab and Tick the following settings, allow error correction and compression in modem, use TCP/IP Header Compression, Connect to a command line host, Use terminal window should be selected.
  5. Click on OK
TCP/IP Settings:
  1. Go back into the Control Panel and select TCP/IP
  2. Set Connect Via to PPP (Make sure that you don't put in Mac PPP Instead)
  3. Under Setup set, Configure to using PPP server, Name server addr: to the Server addresses you were given.
  4. Close the window and save the changes.
FOR ANY SUPPORT PLEASE CONTACT YOUR RESELLER OR CALL TPG INTERNET TECHNICAL SUPPORT
190 222 0305 AT $2 PER MINUTE BILLED TO YOUR TELSTRA ACCOUNT