PageStream can color separate your documents so that they can be printed at a commercial printer. A separate sheet of film or paper will be printed for each spot or process color you use in your document. The sheets of film or paper are referred to as the separations or plates.
You can choose to print a plate for all colors used in your document, or only for specific colors on specific pages. You can also choose to print spot colors as process colors.
When you print process color separations, each of the four process colors are created as a number of dots. The dot pattern is referred to as the screen. The size of the dot is varied to change how much ink is applied to the page and to control the lightness or darkness of the color. The dots from each process color merge with the other colors' dots to trick us into seeing different colors. For example, a combination of cyan and yellow dots create green.
The four screens must be rotated at different angles to help us merge the dots together properly. The rotation angles of each screen is very important, because even a slight difference can create a moirÈ pattern (an undesirable pattern).
Spot colors normally print as solid colors. When you specifically create a tint, spot colors will be screened to lighten the color. Spot colors are usually rotated at the same angle as black.
If you are printing to a PostScript printer, the PPD file for the printer will offer you a choice of optimized screens for that printer. You should always use these optimized values unless instructed to the contrary by your commercial printer.
The frequencies contained in the optimized screens are changed to create the best possible results for a particular imagesetter. You need not worry about these values, since they are set automatically. The only decision you must make is the overall frequency and resolution combination. The resolution required depends on the job and the budget, but the frequency is a factor of the type of press and paper stock. Frequencies below 90 lpi are generally used for newsprint and uncoated paper. Coated paper calls for 100 to 150 lpi while frequencies above 150 lpi are only used on very high-end presses.
To print color separations: Select Color Separations from the Method pop-up menu in the Print dialog box. You should always select Printers' Marks when printing color separations.
You can override the default screen angle and frequency for each plate in PageStream, and specify whether each plate should be overprinted or knocked out. Click Plates in the Print dialog box to display the Plate Control dialog box.
There will be one plate for each separation of each page. Select the plate to modify and then select whether or not the plate should be printed and whether to knockout or overprint this ink. Choose Custom from the Screen pop-up menu to enter a custom frequency and angle for a plate.