Novell Help Librarian Data File Version 1.00
COPYRIGHT (c) 1985 by Novell, Inc.  All Rights Reserved.
#·▒╞╦ΣAα ╩!ï1úA4KⁿL┐NRO4PQDXΓZ╤[¥]/`sa£c·dàfxh+i¬j?ln▓oⁿpr>sτv┬w▓x}╟}P:Ç)ü!âä.à|å⌡ë╔è╔ï}î!ì╟Ä2É╡æ¡Æ╠öúû ù|Ü▄¢▐£╬₧-░g▒}│÷├δ─╟µ╩ⁿ╠≡╨╥╘J┘i█_▌ºαVΣ2σ3τÿΦ_Ω δb∞cφºε)≥y⌡s≈δ∙O²╨■pk█_ù
Ç╨m╝!X%*·+°->/31Ä3Ä5
9å<╚>BF±IⁿN▀P╞SPk pçq
tlwq{ç}N₧üàâ╡ÆÿÜ┘£┼ƒ░ófº£⌐z½P¡├»┤▒╕│1╖ÿ║┤╝╬╛ï┴╕┼╩═╥Γ╙'╫▒∙√ⁿ┴ë$c'∙*#-║.╫0≤2u4■5v7«DB╨                     AVAILABLE TOPICS HELP

     This menu lists the topics that you can examine or change while using SYSCON.  Use the UP and DOWN arrow keys to position the selection bar on the topic you want to choose, then press the SELECT key.  The following help pages describe each topic briefly. 

     While you are in help, you may use the PAGEDOWN and PAGEUP keys to change the current page.  You may press the HELP key a second time to list the keys that can be used in SYSCON, along with where they are located on the keyboard of the machine you are using.  To exit help and return to the menu of available topics, press the ESCAPE key.
     
                                                     Page 1 of 7m	╞NLº                          AVAILABLE TOPICS HELP
ACCOUNTING

The ACCOUNTING option will allow the file server to charge users for their use of file server resources.  Only high-end versions of Advanced NetWare will support accounting.  The accounting option will allow you to complete the following tasks:

1)  Install accounting on a file server that supports it (you must have
    supervisor rights).
2)  See what file server services are being charged for and the amount that
    is being charged.  If you have supervisor rights, you can change the        services that are being charged for and the amount charged for each         service.
3)  See who is allowed to charge for file services.  If you have supervisor
    rights, you can specify who can charge for services.  This allows
    external objects such as print servers to charge users for services.
                                                              Page 2 of 7 «NL¢                           AVAILABLE TOPICS HELP

CHANGE CURRENT SERVER

You may use the "Change Current Server" option to complete the following tasks:

1)  List the servers you are logged in to.  
2)  Log in to additional servers. 
3)  Log out from additional servers.* 
4)  Select the current server (the server and your username will appear in      the header at the top of the screen).
5)  Change to a different user on a server you are logged in to.*

    * You cannot log out from the server you were using when you ran the SYSCON program, or change to a different user on that server.

                                                              Page 3 of 7Nm	:8                 AVAILABLE TOPICS HELP

FILE SERVER INFORMATION

You may use the "File Server Information" option to complete the following tasks:  

1)  List the file servers that are attached to your         network.
2)  View information about the configuration of any         file server in the list. 
3)  View the number of users currently attached to any      file server in the list.
4)  See what version of Advanced NetWare any file           server in the list is running.

                                         Page 4 of 7≥ 
53î               AVAILABLE TOPICS HELP

GROUP INFORMATION

You may use the "Group Information" option to complete the following tasks: 

1)  List the groups that exist on the selected         file server. 
2)  Examine information about each of these            groups.
3)  Change the group information (ONLY if you have     supervisor privileges). 

                                     Page 5 of 7QN	>
<G                   AVAILABLE TOPICS HELP

SUPERVISOR OPTIONS

This brings up a menu of options that are available ONLY if you have supervisor privileges.  The options that are available will depend on what level of Advanced NetWare the selected file server is running.

                                              Page 6 of 7≥
6
4b               AVAILABLE TOPICS HELP

USER INFORMATION

You may use the "User Information" option to complete the following tasks:  

1)  List all users on the selected file server.  
2)  View information about each user.  
3)  Change the user information (ONLY if you have       supervisor privileges).

                                      Page 7 of 7	
31            KNOWN NETWARE SERVERS HELP

     This menu lists the file servers currently on your internetwork.  To obtain information about any of these file servers, choose the server and press the SELECT key.

                                   Page 1 of 1GJHK                    FILE SERVER INFORMATION HELP

     This screen shows information about the selected file server.  A description of this information follows.

SERVER NAME
     The name the file server is known by on the network.

NETWARE VERSION
     The version of NetWare the file server is using.

SYSTEM FAULT TOLERANCE
     This entry shows the level of SFT NetWare that the server is            running.  This information will not appear for file servers that        are running a version prior to NetWare v2.10.

                                                     Page 1 of 4wΣI
G                      FILE SERVER INFORMATION HELP

TRANSACTION TRACKING
     This entry shows whether the file server has support for TTS           recovery for database files in the event of failure by the file        server, workstation, or network.  This entry will not appear if        the file server is running a version prior to NetWare v2.10.

CONNECTIONS SUPPORTED
     The maximum number of users that can be logged in to the file
     server at any one time.

                                                     Page 2 of 4]GLJ╬                      FILE SERVER INFORMATION HELP

CONNECTIONS IN USE
     The number of users currently logged in to the file server.

VOLUMES SUPPORTED
     The maximum number of disk volumes the file server can support.

NETWORK ADDRESS
     The address of the file server's LAN A.

NODE ADDRESS
     The address of the network interface board that communicates with         the LAN A.

                                                            Page 3 of 4w?=╠                 FILE SERVER INFORMATION HELP

     If you are a supervisor on the selected file server, you will also see the following:

SERIAL NUMBER
     The serial number of the file server.

APPLICATION NUMBER
     The application number of the file server.

     When you buy serialized software for your file server, your vendor may ask for both the serial number and the application number. 

                                               Page 4 of 4≥97Ö                   USER NAMES HELP

     This menu lists the users defined on the current file server.  To view information about any of these users, highlight the desired user's name and press the SELECT key.

     If you have supervisor privileges on the current file server, you can change the list of usernames.  See page 2 for a list of your options.

                                         Page 1 of 3½AJHí                            USER NAMES HELP

     If you have supervisor privileges on the current file server, you also have the following options:

INSERT
     Add a new user.

DELETE
     Remove the highlighted user.  To delete several users all at once,      highlight them with the MARK key, press the DELETE key.

MODIFY
     Rename a user.

                                                          Page 2 of 3≥	
64                   USER NAMES HELP

     Some information can be changed for several users at the same time.  To change information for more than one user, mark each user that you want changed using the MARK key, press the SELECT key.

                                      Page 3 of 3	
	64╥                 DELETE USER HELP

     To delete the highlighted user from the current file server, answer YES.  Otherwise, answer NO or press the ESCAPE key.

                                      Page 1 of 1╟$GEσ                        USER INFORMATION HELP

     This menu lists all the information that you can obtain about this user.  To view the information, highlight the desired option and press the SELECT key.  A brief description of each option that may appear is given below.  Note that the actual options that will appear depend on what rights you have, what user you are examining, and what features the file server supports.

ACCOUNT_BALANCE
     Shows the user's current account balance and credit limit.
     This option appears if the file server supports accounting
     and you have supervisor privileges or if the selected user is
     the user you are logged in as.

                                                       Page 1 of 6i'╩!JHè                         USER INFORMATION HELP

ACCOUNT RESTRICTIONS
     Shows restrictions that have been placed on the user's account.
     This option will appear if you have supervisor privileges or if
     the selected user is the user you are logged in as.

CHANGE PASSWORD
     Allows you to change the password when you log in.
     The "Change Password" option appears if you have supervisor
     privileges or if the selected user is the user that you are logged
     in as and your account restrictions have the "Allow User to Change      Password" option set to YES.

                                                          Page 2 of 6é)╟$GE                         USER INFORMATION HELP

FULL NAME
     Shows the user's full name.  This option always appears.

GROUPS BELONGED TO
     Lists all the groups that the user is a member of.  This option
     always appears.

INTRUDER LOCKOUT STATUS
     Shows the intruder lockout status for this user's account.           This option only appears if you have supervisor privileges and       the intruder detection option has been enabled.

                                                       Page 3 of 6Ä,i'IG⌠                         USER INFORMATION HELP

LOGIN SCRIPT
     Allows you to view and edit the user login script.  This option
     appears only if you have supervisor privileges or if the selected
     user is the user that you are logged in as and your account
     restrictions have the "Allow User to Change Password" option set       to YES.

OTHER INFORMATION
     Shows additional information about the selected user such as the
     last time the user logged in, the amount of disk space the user
     is using, the user's bindery ID number, etc.  This option appears       only if you have supervisor privileges or if the selected user
     is the user you are logged in as.

                                                         Page 4 of 6÷.é)JHP                        USER INFORMATION HELP

SECURITY EQUIVALENCES
     Lists all other users and groups to which the selected user is
     security equivalent.  This option only appears if you have
     supervisor privileges or if the selected user is the same user
     you are logged in as.

STATION RESTRICTIONS
     Shows what network addresses this user is allowed to log in from.
     This option only appears if you have supervisor privileges or
     if the selected user is the same user you are logged in as.


                                                          Page 5 of 6Ä,HF}                        USER INFORMATION HELP

TIME RESTRICTIONS
     Show the times during the week when the selected user is allowed
     to be logged in to the file server.  This option only appears if
     you have supervisor privileges or if the selected user is the
     same user you are logged in as.

TRUSTEE ASSIGNMENTS
     Lists all directories where the user's trustee rights have been       explicitly granted or revoked.  This option only appears if you
     have supervisor privileges or if the selected user is the same
     user you are logged in as.

                                                        Page 6 of 6Ñ4NL                          SUPERVISOR OPTIONS HELP

DEFAULT ACCOUNT BALANCE/RESTRICTIONS

This option will appear if the version of NetWare 2.1 that the file server is running supports the new security restrictions.  This option will allow you to:

1)  View the security restriction defaults for a newly created user.
2)  Change the security restriction defaults.  Note: Changing the security
    restrictions defaults will not affect any existing users.
3)  If the version of NetWare 2.1 that the file server is running
    supports the accounting features, and if accounting has been installed      on the file server, you can also view and change the default account
    balance for new users.

                                                              Page 1 of 7/7ï1MKr                         SUPERVISOR OPTIONS HELP

DEFAULT TIME RESTRICTIONS

This option will appear if the version of NetWare 2.1 that the file server is running supports the new security restrictions.  This option will allow you to:

1)  View the default times during which a new user will be able to log in      when the account is first created.
2)  Change the default login time restrictions.  Note: Changing the
    default login time restrictions will not change the login time
    restrictions of any user account that has already been created.

                                                             Page 2 of 7δ8Ñ4IGñ                        SUPERVISOR OPTIONS HELP

EDIT SYSTEM AUTOEXEC FILE

The system AUTOEXEC file is a file which contains console commands that the file server should "automatically execute" when it is first brought up.  This option will allow you to:

1)  View the system AUTOEXEC file.
2)  Add or delete console commands from the AUTOEXEC file.

                                                         Page 3 of 7;/7GE                      SUPERVISOR OPTIONS HELP

FILE SERVER CONSOLE OPERATORS

This option will appear only if the level of NetWare 2.1 that the file server is running supports the file server virtual console features.  This option will allow you to:

1)  View what users and groups have been authorized to run the
    file server console from a workstation where they are logged in.
2)  Authorize or revoke a user or group's rights to run the file
    server console.

                                                       Page 4 of 7½=δ8HFy                        SUPERVISOR OPTIONS HELP

INTRUDER DETECTION/LOCKOUT

This option will only appear if the version of NetWare 2.1 that the file server is running supports the new security restrictions.  This option will allow you to:

1)  See if the file server is tracking when an intruder trys to break
    into an account.
2)  Specify the criteria for the file server to determine how many
    incorrect login attempts constitute an intruder.
3)  Specify if the file server should lock an account if it detects
    an intruder attempting to break into it.

                                                        Page 5 of 7@;LJQ                         SUPERVISOR OPTIONS HELP

SYSTEM LOGIN SCRIPT

The system login script is a script that is run for all users when they log in to the file server before the user's individual login script is executed.  The system login script is an ideal place to put messages that all users should see when they log in, or enter login script commands that every user should execute when logging in.  This option allows you to:

1)  View the system login script.
2)  Change the commands in the system login script.

                                                            Page 6 of 7½=IGw                        SUPERVISOR OPTIONS HELP

VIEW FILE SERVER ERROR LOG

The file server error log is a file where all serious errors that occur while the file server is running are recorded.  This option allows you to:

1)  View the errors that are recorded in the error log.
2)  Clear the error log.

                                                         Page 7 of 7ΣDNL)                              ACCOUNTING HELP

This menu gives you the following options:

ACCOUNTING SERVERS
     This option shows which servers are authorized to charge for their          services.  If you have supervisor privileges, you can use this option       to give a new server the right to charge or to remove a server's right      to charge.

BLOCKS READ CHARGE RATES
     This option will show whether the file server is charging for the           amount of data read from the file server.  If the file server is            charging for "Blocks Read," the amount being charged is shown.  If you      have supervisor privileges, you can change when and how much the file       server charges for reading data from the disk.
                                                              Page 1 of 3┘GúANL▌                              ACCOUNTING HELP

BLOCKS WRITTEN CHARGE RATES
     This option shows you whether the file server is charging for writing       information to the disk and the amount that is being charged.  If you       have supervisor privileges, you can change when and how much the file       server charges for writing to the disk.

CONNECT TIME CHARGE RATES
     This option shows whether the file server is charging for the amount        of time that a user is connected to it and the amount that is being         charged.  If you have supervisor privileges you can change when and         how much the file server charges for connect time.

                                                              Page 2 of 3ΣDNLC                               ACCOUNTING HELP

DISK STORAGE CHARGE RATES
     This option shows whether the file server is charging for the amount        of data that is stored on its disk drives.  If disk storage is being        charged for, it also shows when and how much is being charged.  If you      have supervisor privileges, you will be able to change when and             how much the file server charges for disk storage.

SERVICE REQUESTS CHARGE RATES
     This option shows whether the file server is charging for the number        of requests sent to it from a workstation and the amount that is being      charged.  If you have supervisor privileges, you will be able to            change when and how much the file server charges for requests.

                                                              Page 3 of 3
CA░                 SELECT ACCOUNT SERVER TYPE HELP

     Different types of servers can provide services on a network.  If you have added other types of servers to your network, highlight the type of server you want to authorize to charge, and then press the SELECT key.

     Press the ESCAPE key to return to the list of authorized servers without adding a new server.

                                                   Page 1 of 1	>
<½                      FULL NAME HELP

     Type the full name of the user or group, then press the SELECT key or the ESCAPE key.

     If the user or group already has a full name, use the BACKSPACE key to delete it, then type the new name.

     If you changed the full name but do not want to save the changed name, press the CANCEL key to restore the original name.

                                              Page 1 of 1
20{           INSERT NEW USER NAME HELP

     Enter the name of the new user.

                                   Page 1 of 1
		75╩                   USER NAME HELP

     Use the BACKSPACE key to delete the user's old name.  Then type the user's new name, and press the SELECT key.

                                       Page 1 of 1

<:═                    FULL NAME HELP

     This inset shows the full name of the user or group.  To return to the previous menu, press the ESCAPE key.

                                            Page 1 of 1┌TNL⌐                           OTHER INFORMATION HELP

     This screen shows other information about the selected user or group.  Each of the fields that may appear on this screen are described below.

LAST LOGIN
     This information will appear only when you are getting information          about a user.  The last date that the user logged in to the file            server is shown.  If the user has not logged in to the file server          since the account was created, the message "Unknown" will be shown.

FILE SERVER CONSOLE OPERATOR
     This information will only appear if the level of NetWare v2.1 that         the file server is running supports the file server console features.       It indicates whether or not the user or group has been given                authorization to perform file server console functions from a               workstation.

                                                              Page 1 of 2QNLR                           OTHER INFORMATION HELP


MAXIMUM DISK SPACE
     This option will appear only if you are getting information about a         user and the file server is enforcing disk space limitations.  The          maximum amount of disk space that the user can use will be shown in         kilobytes (1 kilobyte is 1024 bytes).  If the user does not have a          maximum restriction, the entry will show "Unrestricted."

DISK SPACE IN USE
     This option will appear only if you are getting information about a         user.  The amount of disk space being used by files owned by the            selected user is shown in kilobytes (1 kilobyte is 1024 bytes).

USER ID (or GROUP ID)
     This option shows the bindery ID number of the selected user or group.

                                                              Page 2 of 2LJå                  SET MULTIPLE USER INFORMATION HELP

     This menu allows you to change information for all the users that are marked.  Each of the options is described below.

ACCOUNT BALANCE
     Lets you change the account balance and credit limit for all the
     marked users.

ACCOUNT RESTRICTIONS
     Lets you change the account restrictions of all the marked users.

STATION RESTRICITONS
     Lets you specify what stations all the marked users can log in from.

TIME RESTRICTIONS
     Lets you change the times of the week when the marked users can log       in.
                                                            Page 1 of 1
@>╫                    LOG OUT FROM SERVER HELP

     To log out from the highlighted file server, select YES.  Otherwise, select NO or press the ESCAPE key.

                                                Page 1 of 1
64┤                 CHARGE RATE HELP

     Highlight the charge rate that you want to apply during the selected time period, and then press the SELECT key.

     If the charge rate that you want to apply during the selected time period is not shown, select the "Other Charge Rate" option and press the SELECT key.

     If you do not want to change the charge rate, press the ESCAPE key.

                                      Page 1 of 1
:8z           LOGIN TIME MUST BE ALLOWED HELP

     You have set the time restrictions so the user cannot be logged in at any time during the week.  If you do not want the user to log in, you should disable the account.  Since time restrictions are enforced on the network supervisor's account, SYSCON tries to protect you from making a mistake and locking the network supervisor (or any other user) out of the account by not allowing any time periods during which he or she can be logged in.

     Mark the time periods when the user should be able to log in with an asterisk (*).

                                          Page 1 of 1
	
:8,             NO STATION RESTRICTIONS HELP

     No station restrictions have been placed on this account.  This user can log in from any workstation on the internet.  Only the network supervisor can restrict what stations a user can log in from.

                                          Page 1 of 1
CA                    STATION RESTRICTIONS HELP

     This list shows network addresses from which the selected user is allowed to log in.  If the list is empty, the user can log in from any workstation.  If the list is not empty, the user can only log in from workstations whose address is included in the list.  Addresses are shown as a network number and a node number.  It is also possible to specify that the user can log in from any node on a specified network.

                                                   Page 1 of 12
0F         INVALID NETWORK ADDRESS HELP

     Network addresses must be between 1 and FFFFFFFE.  You have entered a number outside this range.  Check the address of the workstation you want to allow this user to log in from, and re-enter the correct network portion of the address.

                                  Page 1 of 1?	=s                  SECURITY EQUIVALENCES HELP

     This menu lists the users and groups to which the selected user is security equivalent.  (The selected user has all the rights of the users and groups to which the user is security equivalent, in addition to the rights explicitly granted him or her as a user.)

                                               Page 1 of 1	
=;█               OTHER USERS AND GROUPS HELP

     This menu lists the users and groups to which the selected user is not security equivalent.  To make the user security equivalent to a user or group, highlight the desired user or group, then press the SELECT key.  To make the user security equivalent to more than one user or group, highlight the desired users and groups with the MARK key, then press the SELECT key.

                                             Page 1 of 1
31¢             GROUPS BELONGED TO HELP

     This menu lists the groups to which the selected user belongs.

                                     Page 1 of 1
5
3g                 OTHER GROUPS HELP

     This menu lists the groups of which the current user is not yet a member.  To add the selected user to a group, highlight the group and press the SELECT key.  To add the user to several groups, highlight the desired groups with the MARK key, then press the SELECT key.

                                     Page 1 of 1:
8}                TRUSTEE ASSIGNMENTS HELP

     This menu lists the directories in which the highlighted user's or group's trustee rights have been explicitly granted or revoked.  (Trustee rights extend to each subdirectory of the directory in which they are declared, unless they are specifically changed in the subdirectory.)

                                          Page 1 of 1@>╗                  GRANTED TRUSTEE RIGHTS HELP

     This menu lists the rights currently granted to the user or group in the highlighted directory.  You have the following options:

INSERT
     Grant additional rights.

DELETE
     Revoke the highlighted right.  To revoke several rights       simultaneously, highlight the rights with the MARK key,       then press the DELETE key.

                                                Page 1 of 1C
Aê                    OTHER TRUSTEE RIGHTS HELP

     This menu lists the rights that have not been granted to the user or group in the highlighted directory.  

     To grant any of these rights, highlight the right and press the SELECT key.  To grant several rights, highlight them with the MARK key, then press the SELECT key.

                                                    Page 1 of 17	52         ALL NODES ARE ALREADY ALLOWED HELP

     You have already specified that the user can log in from all nodes on this network.  If you want to limit the user to specific nodes on the network,  you must delete the entry that allows all nodes first.

                                       Page 1 of 1	
64            EXISTING SUBDIRECTORIES HELP

     This menu lists the subdirectories of the volume or directory you have specified.  Position the selection bar on the subdirectory you want and press the SELECT key.

                                      Page 1 of 1	
20      DUPLICATE STATION RESTRICTION HELP

     The address you have just entered is already in the list of addresses the user is allowed to log in from.  You cannot enter the same address into the list more than one time.

                                  Page 1 of 1φt

<:ù                     GROUP NAMES HELP

     This menu lists the groups on the current file server.  To learn more about any of these groups, choose that group and press the SELECT key.

     If you have supervisor privileges on the current file server, you can also modify the groups shown.  For a description of available options, see the next page.

                                            Page 1 of 2>s	=
;Γ                   EXISTING GROUPS HELP

     If you have supervisor privileges on the current file server, you also have the following options:

     INSERT    Add a new group.
     DELETE    Delete the selected group.  To delete                      several groups simultaneously, highlight                   them with the MARK key, then press the                     DELETE key. 
     MODIFY    Rename the selected group.

                                             Page 2 of 2
86├                    GROUP NAME HELP

     Type the name of the group you wish to create on the current file server, then press the SELECT key.

                                        Page 1 of 1

<:╪                      GROUP NAME HELP

     Use the BACKSPACE key to erase the group's old name.  Then type the group's new name and press the SELECT key.
     
                                            Page 1 of 1tz	><¬                 GROUP INFORMATION HELP

     This menu shows you information about the selected group.  To view the information, choose the desired option and press the SELECT key.  A brief description of each option follows:

FULL NAME
     Displays the group's full name.

MEMBER LIST
     Lists the users on the current file server that belong
     to this group.

                                              Page 1 of 2▓xHFÇ                       GROUP INFORMATION HELP

     The following options are displayed ONLY if you belong to the group selected, or have supervisor privileges on the current file server.

OTHER INFORMATION
     Shows the group ID number.  If the current file server supports
     the virtual console features, it also shows whether the group         has been given console operator rights.

TRUSTEE ASSIGNMENTS 
     Lists the directories (on the current file server) in which
     the group has trustee rights, along with the rights granted in
     each directory.
     
                                                        Page 2 of 2
	=;ú                   GROUP MEMBERS HELP

     This list shows the users that belong to the selected group.
                                               Page 1 of 1
;9q                    OTHER USERS HELP

     This menu lists the users on the file server who are not members of the selected group.  

     To add a user to the group, choose the user and press the SELECT key.

     To add more than one user to the group, highlight them with the MARK key and press the SELECT key.

                                           Page 1 of 1		97╥                   DELETE GROUP HELP

     To delete the selected group(s) from this file server, answer YES.  Otherwise, answer NO or press the ESCAPE key.

                                         Page 1 of 1
	=;╫                DELETE USER FROM GROUP HELP

     To remove the highlighted users from the selected group, answer YES.  Otherwise, answer NO or press ESCAPE.

                                             Page 1 of 1
B@α               DELETE TRUSTEE FROM DIRECTORY HELP

     When a trustee is deleted from a directory, the trustee's rights revert to the rights the trustee has in the parent directory.  Thus, if no trustee rights were declared in the parent directory, the trustee will no longer have any rights.
     To delete the selected trustee from the selected directory, answer YES.  Otherwise, answer NO or press the ESCAPE key.

                                                  Page 1 of 1		97┌              DELETE USER FROM GROUP HELP

     To delete the current user from the highlighted group(s), answer YES.  Otherwise, answer NO or press the ESCAPE key.

                                         Page 1 of 1	
	;9             DELETE SECURITY EQUIVALENCES HELP

     To delete the current user's security equivalences to the highlighted user(s) and group(s), answer YES.  Otherwise, answer NO or press the ESCAPE key.

                                           Page 1 of 12
06             BAD NODE ADDRESS HELP

     Node addresses must be between 0 and FFFFFFFFFFFE.  You have entered a number outside this range.  Check the address of the workstation that you want to allow this user to log in from and re-enter the correct node address.

                                  Page 1 of 1KIa                  SUPERVISOR STATION RESTRICTION HELP

     Station restrictions are enforced on the supervisor account.  If you accidentally list invalid addresses in the list of addresses from which the supervisor is allowed to log in, the supervisor could never log in again.  To help prevent you from making this mistake, SYSCON will check to see that you can at least log in from the station you are on right now.

     Check the addresses you entered to make sure they are correct. If they are incorrect, delete the incorrect entries and re-enter them.  If they are correct, but this station is not included, you must either delete all the entries or add this station temporarily.  Then go to one of the stations you are going to allow the supervisor to log in from and correct the list.

                                                           Page 1 of 1		1/╝               FULL NAME HELP

     No full name has been defined for the selected user or group.  (Only the supervisor can define a full name.)

                               Page 1 of 1	
20Φ            USER ALREADY EXISTS HELP

     The user was not added because a user with that name already exists on the file server. Each user on the file server must have a unique name. 

                                  Page 1 of 1
1/£     THE SUPERVISOR CANNOT BE DELETED HELP

     SUPERVISOR is a special user who cannot be deleted.
        
                                   Page 1 of 1
-+î   THE SUPERVISOR CANNOT BE RENAMED HELP

   SUPERVISOR is a special user who cannot be renamed.

                              Page 1 of 1

;
9Ä                  LOG IN TO SERVER HELP

     You cannot log in to an additional file server because your station is already attached to 8 servers.  (A station cannot be logged in to more than 8 servers simultaneously.)  You must log out from one of the servers to which you are currently logged in before you can log in to any other servers.

                                           Page 1 of 12
0S         ACCOUNTING NOT SUPPORTED HELP

     The version of Advanced NetWare that is running on this file server does not support the accounting features.  If you need to use accounting features on this server, you should upgrade to a version of Advanced NetWare that supports these features.

                                  Page 1 of 1A	?k                   ACCOUNTING WRONG VERSION

     This version of SYSCON does not support the version of accounting that this file server is running.  You have probably run an incorrect version of SYSCON.  Check to make sure that you ran the version of SYSCON that came with your file server software.

                                                 Page 1 of 1	
	64α           ACCOUNTING NOT INSTALLED HELP

     Accounting has not been installed on this file server.  A user must have supervisor privileges in order to install accounting.

                                      Page 1 of 1EC                 FILE SERVER CANNOT CHARGE HELP

     The file server has been removed from the list of authorized accounting servers.  It cannot charge users for any file service or disk storage service unless its name appears in the list of authorized accounting servers.

     If you want the file server to charge for a service, select the "Accounting Servers" option and press the INSERT key to authorize the file server to charge for its services.

                                                     Page 1 of 1
64┐            USER IS ALREADY A TRUSTEE HELP

     You were unable to add the selected user or group as a trustee in the directory because the user or group is already a trustee in the directory.  

     You may, however, change the user's or group's trustee rights in the directory.  To do so, highlight the name of the directory in which the user or group is a trustee, then press the MODIFY key.

                                      Page 1 of 1

64D      THE SPECIFIED VOLUME DOES NOT EXIST HELP

     The trustee was not added because a nonexistent volume was specified in the directory path. 

     To list the file server's existing volumes, use the BACKSPACE key to erase the directory path, then press the INSERT key.

                                      Page 1 of 1FDe                          ADD TRUSTEE HELP

     The file server will not let you add the trustee to the directory because you entered an incorrect directory path.   

     A directory path consists of a volume name, followed by a colon, followed by a list of directory names.  Directory names must be separated by a slash (/) or a backslash (\), and may be up to 14 characters long.  An example of a valid directory path is WORK:JOHN/DOCUMENTS.

     You may press the INSERT key to list all the subdirectories of the path that you have entered.

                                                      Page 1 of 13
1H               CREATE NEW USER HELP

     Normally when users are created, they are automatically added to the group EVERYONE.  An error occurred while attempting to add the new user to the group EVERYONE.  This error probably occurred because the group EVERYONE has been deleted.

                                   Page 1 of 1	
	64Ω                   ADD GROUP HELP

     The group was not added because a group with that name already exists on the file server.  Each group on a file server must have a unique name.

                                      Page 1 of 1:
8╪             READ LOGIN SCRIPT FOR USER HELP

     Because you have supervisor privileges, you can read the login script of users other than the currently selected user.  

     To access another user's login script, use the BACKSPACE key to delete the current user's name, then either type the name of the user whose login script you want to view, or press the INSERT key to list the available users, and select one.

                                          Page 1 of 1ôóLJ¡                         USER LOGIN SCRIPT HELP

     The user login script specifies the actions that will occur when the current user logs in.  The commands in the user login script are executed after the commands in the system login script.  

     A default login script is run for users who do not have a login script created specifically for their usernames.  WHEN YOU SAVE A LOGIN SCRIPT IN SYSCON, IT OVERRIDES YOUR DEFAULT SCRIPT.  DO NOT SAVE AN INCORRECT LOGIN SCRIPT IN SYSCON, OR YOUR STATION WILL NOT HAVE SEARCH DRIVES MAPPED CORRECTLY WHEN YOU LOG IN TO THE SYSTEM.  If you delete the entire login script and save it (spaces and carriage returns must all be deleted also), then the default login script will be used again.

     For a detailed explanation of how to create and modify your own login script, see Appendix A of the Menu Utilities manual. 

                                                            Page 1 of 6ßñ╬₧@>6                     USER LOGIN SCRIPT HELP

     You can use the following keys to edit the user login script.  Press the ESCAPE key when finished. (For a description of which physical key to use on your particular machine and an explanation of the key's function, press the HELP key a second time.)

     PAGEUP, PAGEDOWN, SPECIAL UP, SPECIAL DOWN, SPECIAL           RIGHT, SPECIAL LEFT, UP, DOWN, RIGHT, LEFT, FIELD RIGHT       (WORD RIGHT), FIELD LEFT (WORD LEFT), DELETE, BACKSPACE,      and CANCEL. 

                                                Page 2 of 6cªôó20j             USER LOGIN SCRIPT HELP

     To delete a block of text, press the MARK key and use the UP and DOWN keys to highlight the text.  Then press the DELETE key.

     To move a block of text, delete it as explained above, and position the cursor where you wish to insert the text.  Then press the INSERT key.

                                  Page 3 of 6⌡¿ßñ	=;z                  LOGIN SCRIPT COMMANDS

     Each login script command must be written on its own line.  Blank lines will be ignored by LOGIN.
  
     The following commands may be used in a login script:

        MAP             WRITE           EXIT
        DRIVE           IF... THEN      BREAK
        DOS BREAK       # (EXEC)        REMARK
        COMSPEC=        INCLUDE         DISPLAY
        FDISPLAY        PAUSE           MACHINE NAME=
        DOS SET

     See Appendix A of the Menu Utilities manual for an
explanation of how to execute these commands.           

                                             Page 4 of 6¼cªIG              EXPLANATION OF LOGIN SCRIPT IDENTIFIERS

     Identifiers are predefined symbols recognized by LOGIN.  They represent textual information that is variable.  For example, the identifier DAY_OF_WEEK represents the literal string "Monday," "Tuesday," or whatever the current day is. 

     Identifiers may be displayed (see WRITE command), or may be used in comparisons (see IF...THEN command).

     Identifiers preceded by a percent (%) sign will be replaced by their corresponding text value.  They may appear anywhere in the login script, like command-line parameters.  Notice that identifiers MUST be in ALL CAPITALS. 

     See the following screen for a list of identifiers.
                  
                                                         Page 5 of 6⌡¿PNⁿ                       LOGIN SCRIPT IDENTIFIERS

Identifier     Text Value        Identifier     Text Value

HOUR           1 to 12           LOGIN_NAME     User's login name
HOUR24         00 to 23          FULL_NAME      User's full name
MINUTE         00 to 59          STATION        Station number
SECOND         00 TO 59          GREETING_TIME  Morning, Afternoon, or
                                                   Evening
AM_PM          am or pm          NEW_MAIL       Yes or No
MONTH          01 to 12          OS             MS DOS
MONTH_NAME     June, May, etc.   OS_VERSION     V2.11 or V3.00
DAY            01 to 31          MACHINE        IBM PC,Victor 9000,etc.
YEAR           1983, 2016, etc.  SHELL_TYPE     Shell type number
SHORT_YEAR     83, 16, etc.      P_STATION      Physical station number
DAY_OF_WEEK    Monday, Tuesday   SMACHINE       Short machine name
NDAY OF WEEK   1 to 7 (1=Monday) MEMBER_OF      No text value

                                                          Page 6 of 6  
20"               LOGIN SCRIPT HELP

     This menu lists the file server users.  Highlight the name of the user whose login script you want to access, then press the SELECT key.  

     If you do not want to select a user, press the ESCAPE key.

                                  Page 1 of 1

<:■              READ LOGIN SCRIPT FOR USER HELP

     Because you have supervisor privileges, you can assign the highlighted user's login script to another  user.  

     To do so, use the BACKSPACE key to delete the highlighted user's name from the "Read Login Script for User" entry box.  Then, to assign the login script to another user, either type that user's name, or press the INSERT key to list the file server users and select one from the list.

                                             Page 1 of 1π╡	><N                 SYSTEM LOGIN SCRIPT HELP

     The system login script specifies actions that will occur for all users when they log in.  The commands in the system login script are executed before the commands in the individual user's login script.

     A default login script is run for users who do not have a login script created specifically for their usernames.

     For a detailed explanation of how to create and modify your own login script, see Appendix A of the Menu Utilities manual.
                                 
                                              Page 1 of 6#╕}│HF(                      SYSTEM LOGIN SCRIPT HELP

     You can use the following keys to edit the system login script.  Press the ESCAPE key when finished. (For a description of which physical key to use on your particular machine and an explanation of the key's function, press the HELP key a second time.)

PAGEUP, PAGEDOWN, SPECIAL UP, SPECIAL DOWN, SPECIAL RIGHT, SPECIAL LEFT, UP, DOWN, RIGHT, LEFT, FIELD RIGHT (WORD RIGHT), FIELD LEFT (WORD LEFT), DELETE, BACKSPACE, and CANCEL.

                                                        Page 2 of 6»╣π╡
86t               SYSTEM LOGIN SCRIPT HELP

     To delete a block of text, press the MARK key and use the UP and DOWN keys to highlight the text.  Then press the DELETE key.

     To move a block of text, delete it as explained above and position the cursor where you wish to insert the text.  Then press the INSERT key.

                                        Page 3 of 6 ,╝#╕	=;e                   LOGIN SCRIPT COMMANDS

     Each login script command must be written on its own line.  Blank lines will be ignored by LOGIN.

The following commands may be used in a login script:

        MAP            WRITE           EXIT
        DRIVE          IF...THEN       BREAK
        DOS BREAK      # (EXEC)        REMARK
        COMSPEC=       INCLUDE         DISPLAY
        FDISPLAY       PAUSE           MACHINE NAME=
        DOS SET

     See Appendix A of the Menu Utilities manual for an explanation of how to execute these commands.

                                             Page 4 of 6
╢┐»╣FDr              EXPLANATION OF LOGIN SCRIPT IDENTIFIERS

     Identifiers are predefined symbols recognized by LOGIN.  They represent textual information that is variable.  For example, the identifier DAY_OF_WEEK represents the literal string "Monday,"
"Tuesday," or whatever the current day is.

     Identifiers may be displayed (see WRITE command), or may be used in comparisons (see IF...THEN command).
     The MEMBER OF identifier may only be used in comparisons.  It has no test value.  (IF (NOT) MEMBER OF GroupName THEN....)

     Identifiers preceded by a percent (%) sign will be replaced by their corresponding text value.  They may appear anywhere in the login script, like command-line parameters.  Notice that identifiers MUST be in ALL CAPITALS.
     See the following screen for a list of identifiers.
                                                      Page 5 of 6,╝PN(                        LOGIN SCRIPT IDENTIFIERS

Identifier       Text Value        Identifier      Text Value

HOUR             1 to 12           LOGIN_NAME      User's login name
HOUR24           00 to 23          FULL_NAME       User's full name
MINUTE           00 to 59          STATION         Station number
SECOND           00 TO 59          GREETING_TIME   Morning, Afternoon, or                                                           Evening
AM_PM            am or pm          NEW_MAIL        Yes or No
MONTH            01 to 12          OS              MSDOS
MONTH_NAME       June, May, etc.   OS_VERSION      V2.11 or V3.00
DAY              01 TO 31          MACHINE         IBM PC,Victor9000,etc. YEAR             1983, 2016, etc.  SHELL_TYPE      Shell type number
SHORT_YEAR       83, 16, etc.      P_STATION       Physical station number
DAY_OF_WEEK      Monday, Tuesday   SMACHINE        Short machine name
NDAY_OF_WEEK     1 to 7 (1=Monday) MEMBER OF       No text value

                                                           Page 6 of 6		20▌             SUPERVISOR OPTIONS HELP

     Only users with supervisor rights can select this option.  You do not have supervisor rights on the currently selected file server.

                                  Page 1 of 1	><■                 GROUPS BELONGED TO HELP

     This menu lists the groups to which the selected user belongs.  Because you are a supervisor, you may modify the user's group membership.  You may:

INSERT
     Add the user to more groups.

DELETE
     Delete the user from the currently highlighted group.       To delete the user from several groups simultaneously,      highlight the desired groups with the MARK key, then        press the DELETE key.

                                              Page 1 of 1ü╚
20h     SECURITY EQUIVALENCES HELP (SUPERVISOR)

     This menu lists the users and groups to which the highlighted user is security equivalent. (The selected user has all the rights of the users and groups to which the user is security equivalent, in addition to the rights explicitly granted him or her as a user.)

                                  Page 1 of 2╟GEM                SECURITY EQUIVALENCES HELP (SUPERVISOR)

     Because you have supervisor privileges, you may modify any user's security equivalences.  You may:

INSERT
     Make the user security equivalent to additional users and            groups.

DELETE
     Delete the user's security equivalence to highlighted users and      groups.  To remove several security equivalences                     simultaneously, use the MARK key to highlight the desired            user(s) and group(s), then press the DELETE key.

                                                         page 2 of 2:8■                 GROUP MEMBERS HELP

     This menu lists the users that belong to the selected group.  
     Because you have supervisor privileges on the current file server, you may:

INSERT    Add additional users to the selected group.

DELETE    Delete the selected user(s) from the                    group.  

          To delete several users simultaneously,                 highlight them with the MARK key, then press            the DELETE key.

                                          Page 1 of 1â╬
20o           TRUSTEE ASSIGNMENTS HELP

     This menu lists the directories in which the highlighted user's or group's trustee rights have been explicitly granted or revoked. (Trustee rights extend to each subdirectory of the directory in which they are declared, unless they are specifically changed in the subdirectory.)

                                  Page 1 of 2ⁿ╠PNU                         TRUSTEE ASSIGNMENTS HELP

     Because you have supervisor privileges, you can modify trustee assignments.  You may:

INSERT
     Explicitly declare the user's or group's trustee rights in a directory.

DELETE 
     Remove the highlighted trustee rights declaration.  To remove several         declarations simultaneously, highlight them with the MARK key, then           press the DELETE key.

SELECT
     Change the rights explicitly granted or revoked in the highlighted            directory.

                                                                Page 2 of 2	
20°          REVOKE TRUSTEE RIGHTS HELP

     If you want all of the marked trustee rights to be revoked in this directory for the selected user, answer YES.  Otherwise, answer NO or press the ESCAPE key.

                                  Page 1 of 1@>÷                 CREATE NEW DIRECTORY HELP

     The directory you have specified does not exist.  If you have misspelled the directory name, answer NO or press the ESCAPE key.  Then correct the spelling.  If you want to give the selected user trustee rights to a directory that did not previously exist, answer YES.

     If you answer YES, the directory will be created and the selected user will be given trustee rights in that directory.

                                                Page 1 of 1Ö╓?=s               DEFAULT TIME RESTRICTIONS HELP

     This window allows you to specify the default time restrictions that will be in effect when new user accounts are created.  The default time restrictions specify which times of the day a user is allowed to be logged in to the file server.  

     The week is divided into half hour time blocks.  If the user is allowed to be logged in during a given half hour block, the block should be marked with an asterisk (*).  If the user is not allowed to be logged in, the half hour block should be marked with a space ( ).

                                               Page 1 of 2╘NLÖ                      DEFAULT TIME RESTRICTIONS HELP

     The following keys can be used to change whether a user can be logged in.

INSERT key or the asterisk (*) key
     Specifies that the user is allowed to login.

DELETE key or the space ( ) key
     Specifies that the user is not allowed to login.

SELECT key
     Reverses the current setting(s).

     A large block of time can be changed by positioning the cursor at one corner of the time block, pressing the MARK key, and then moving the cursor to the other corner of the time block before pressing one of the keys listed above.
                                                              Page 2 of 2?
=                    VIEW ERROR LOG HELP

     This file shows all the errors that have been logged since the last time the error log file was cleared.  Each time an error occurs while the file server is running, the error is shown on the system console.  In addition, the error is logged in the error log file.

     You can use the following keys to examine the errors recorded in the error log file:  UP, DOWN, PAGEUP, PAGEDOWN, SPECIAL UP and SPECIAL DOWN.

                                               Page 1 of 197▐            NO OTHER ACCOUNTING SERVERS HELP

     In order for a server to be authorized to charge for its services, it must have an account on this file server that it logs into.  SYSCON knows about server accounts for Job Servers, Gateways, Print Servers, Archive Servers, SNA Gateways, and Remote Bridges.  There are no accounts for any of the servers that have not been given authorization to charge for their services.

                                         Page 1 of 1DB0               MORE THAN 20 CHARGE CHANGES HELP

     The method the file server uses to record the amounts being charged during various times of the day allows the charge rate to be changed a maximum of 20 times.  One entry can change the rate to a new value for one or more days.  For instance, one entry can change the charge for connection time to 1/30 at 8:00am on Monday, Wednesday, and Friday.  It takes another entry to change the rate to 1/50 at 8:00am on Tuesday.  Each time of the day that a rate change occurs uses at least one entry.  More than one entry is needed if there is a change for more than one day and the charge rate is not the same.

     Consolidate the rate changes you have made so they can be stored in 20 entries or less.

                                                    Page 1 of 1LJù                  MORE THAN 20 DISK CHARGE ENTRIES HELP

     The method the file server uses to record when disk storage space should be charged for and the rate that should be used, allows the charge times and rates to be assigned a maximum of 20 times.  One entry can charge a specific rate at a certain time on one or more days.  For instance one entry can charge for 1/50 per block-day of disk storage space at 2:00am on Monday, Wednesday, and Friday.  It takes another entry to charge the rate to 1/50 at 2:00am on Tuesday.  Each time of the day that a change occurs uses at least one entry.  It will use more than one entry if there is a different charge rate for the same time period on other days of the week.

     Consolidate the times and rates that are being charged for disk storage so that they can be stored in 20 entries or less.

                                                            Page 1 of 1	
20─
              ERROR LOG IS EMPTY

     No errors have been recorded in the file server error log file since the last time the error log was cleared.

                                  Page 1 of 1
64Θ              LOGOUT FROM SERVER HELP

     You pressed the DELETE key, which allows you to log out from the marked file servers.  However, a local drive was marked, and it is not possible to log out from local drives.

     If you want to log out from a file server, highlight that file server's name before pressing the MODIFY key.  To log out of multiple file servers, mark each server with the MARK key before pressing the DELETE key.

                                      Page 1 of 1
6	4M    TRUSTEE RIGHTS DIRECTORY SPECIFICATION HELP

     Only directories on the file server where the user account exists can be used.  Specify the directory path, beginning with the volume name.  If you do not remember the path, press the INSERT key to view the existing directories.

                                      Page 1 of 1

64»    TRUSTEE RIGHTS DIRECTORY SPECIFICATION HELP

     Drive letters cannot be used when you specify the directories in which a user has trustee rights. Only directories on the file server where the user account exists can be used.  Specify the directory path, beginning with the volume name.  If you do not remember the path, press the INSERT key to view the existing directories.

                                      Page 1 of 1
20⌐             INVALID DRIVE HELP

     The drive you specified is not currently
valid.  Press INSERT to select a directory.

                                  Page 1 of 12
0*          FILE EXISTS BY NEW DIR NAME

     The directory specified cannot be created because a file by the same name already exists in the specified directory path.
 
     To create a new directory, rename the directory or change the directory path. 

                                 Page 1 of 1 	
20Θ           USER DOES NOT EXIST HELP

     There is no user account with the specified name.  If you do not remember the user's name, press the INSERT key to get a list of all user names.

                                  Page 1 of 12	0,          INVALID INTEGER VALUE HELP

     The number you entered is not in the permitted range of numbers.  Enter a number that is in the specified range, or if you do not want to change this field, press the CANCEL key to restore the original setting.

                                  Page 1 of 1LJj                       STATION RESTRICTIONS HELP

     This list shows network addresses from which the selected user is allowed to log in.  If the list is empty, the user can log in from any workstation.  If the list is not empty, the user can only log in from workstations whose addresses are included in the list.  Addresses are shown as a network number and a node number.  It is also possible to specify that the user can log in from any node on a specified network.  You can change the allowed login addresses using the following keys:

INSERT    Add an address to the list of allowed login addresses.

DELETE    Remove an address from the list of allowed login addresses.
          You can remove several addresses by marking each one with the
          MARK key before pressing the delete key.

                                                            Page 1 of 1LJ8                        ACCOUNTING SERVERS HELP

     This list shows all of the servers that are authorized to charge for their services.  If a server does not appear in this list, it will be unable to charge for services it performs (although an audit note indicating that it attempted to charge will still be placed in the audit file).  The file server must appear in this list if it is to charge for any file services.  You can change this list by using the following keys:

INSERT    Authorize another server to charge for its services.

DELETE    Revoke a server's right to charge for its services.  You can
          also revoke several servers' rights at once my marking each
          server with the MARK key before pressing the DELETE key.

                                                            Page 1 of 1

A?Γ                    ACCOUNTING SERVERS HELP

     This list shows all of the servers that are authorized to charge for their services.  If a server does not appear in this list, it will be unable to charge for services it performs (although an audit note indicating that it attempted to charge will still be placed in the audit file).  The file server must appear in this list, if it is to charge for any file services.

                                                  Page 1 of 1A?`               SERVERS NOT AUTHORIZED TO CHARGE

     This list shows all servers of the selected type that are not currently authorized to charge for their services.  If the list is empty, there are no servers of this type that are not authorized to charge.

     Select the server you want to authorize to charge, and press the SELECT key.  You can authorize several servers at the same type by marking each server with the MARK key before pressing the SELECT key.

     If you do not want to authorize a server to charge, press the ESCAPE key.

                                                 Page 1 of 1KIL                   FILE SERVER CONSOLE OPERATORS HELP

This list shows all the users and groups that have been given special privileges when using the FCONSOLE (file server console) menu utility from any workstation on which they are logged in.  In addition, any users that are security equivalent to a user or group in this list will also have these same privileges when using FCONSOLE at any workstation.  You have the following options:

INSERT    Authorize new users or groups to run FCONSOLE (file server               console) from their workstation.

DELETE    Revoke a user's or group's right to run FCONSOLE.  You can               revoke several users' or groups' rights by marking each user             or group with the MARK key before pressing the DELETE key.

                                                           Page 1 of 1?	=i                  DELETE CONSOLE OPERATOR HELP

     If you want to revoke the selected user's or group's rights to run the virtual console from a workstation, choose YES and press the SELECT key.  If you do not want to revoke their rights, choose NO and press the SELECT key, or press the ESCAPE key.

                                               Page 1 of 1J
Hê                 ADD FILE SERVER CONSOLE OPERATOR HELP

     This list shows all users and groups that have not been explicitly granted the right to run the file server console from any workstation.  To give a user or group the right to run the file server console, highlight the user's or group's name and press the SELECT key.  To give several users or groups the right to run the file server console, mark each name using the MARK key and then press the SELECT key.

     If you do not want to give anyone else the right to run the file server console, press the ESCAPE key.

                                                          Page 1 of 1
B@Ä           DELETE MARKED STATION RESTRICTIONS HELP

     If you want to remove all the highlighted station restrictions from the list of addresses where this user can log in, answer YES.  Otherwise, answer NO or press the ESCAPE 
key.

     Note that deleting all addresses from the list will allow the user to log in from any address.

                                                  Page 1 of 12	0=          REMOVE ACCOUNTING SERVER HELP

     If you want to revoke the marked servers' right to charge users for their services,  answer YES.  If you want them to continue to be authorized to charge for services they provide to users, answer NO or press the ESCAPE key.

                                  Page 1 of 1DBX                     CONNECT CHARGE RATES HELP

     This screen shows how much the file server will charge for each minute of connect time (time that a user is logged in to the file server).  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during other time periods.  In addition, the amount that is charged during different time periods of the week can be varied.

     Each half hour is marked by the charge rate that applies during that half hour period.


                                                    Page 1 of 1JHl                       CONNECT CHARGE RATES HELP

     This screen shows how much the file server will charge for each minute of connect time (time that a user is logged in to the file server).  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during other time periods.  In addition, the amount charged during different time periods of the week can be varied.
     The number next to each half hour period indicates the charge rate assigned to that half hour period.  If you have supervisor rights, you can change the charge during a single half hour by positioning the cursor on the half hour, and then pressing the SELECT key.  You can change the charge for a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block, and then pressing the SELECT key.
     To not charge during a time period, change the charge rate during that time period to No Charge (charge multiplier of 0).
                                                          Page 1 of 1
HF                      DISK STORAGE CHARGE RATES HELP

     This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is stored on a disk for one day.  The screen shows the time when the file server will charge for disk storage and the amount charged per block-day.  The file server will charge for disk storage at the specified half hour and will charge for all disk storage since the last time that disk storage was charged for.

                                                        Page 1 of 1LJ╤                      DISK STORAGE CHARGE RATES HELP

     This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is stored on a disk for one day. The screen shows the time at which disk storage charges will be made and the amount charged per block-day.  The file server will check disk storage at a specified half hour and will charge for all disk storage since the last time that disk storage was charged for.

     You can specify a charge time for a single half hour by positioning the cursor on the half hour and then pressing the SELECT key.  To specify a charge time for a larger block, position the cursor at the beginning of the time block and press the MARK key.  Then move the cursor to the other end of the block, and press the SELECT key.

     To not charge during a time period, change the charge rate during that time period to No Charge.

                                                            Page 1 of 1E
C8                 SERVICE REQUESTS CHARGE RATES HELP

     This screen shows how much the file server will charge for each request that is made by a workstation.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during other time periods. In addition, the amount that is charged during different time periods of the week can be varied.

     Each half hour is marked by the charge rate that applies during that half hour period.

                                                     Page 1 of 1MK                  SERVICE REQUESTS CHARGE RATES HELP

     This screen shows how much the file server will charge for each request that is made by a workstation.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during other time periods.  In addition, the amount charged during different time periods of the week can be varied.

     Each half hour is marked by the charge rate that applies during that half hour period.  You can change the charge during a single half hour by positioning the cursor on the half hour and then pressing the SELECT key.  You can change the charge during a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block and then pressing the SELECT key.

     To not charge during a time period, change the charge rate during that time period to No Charge (charge multiplier of 0).
                                                        Page 1 of 1DBN                     DISK READ CHARGE RATES HELP

     This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is read from the disk.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during other time periods.  In addition, the amount that is charged during different time periods of the week can be varied.

     Each half hour is marked by the charge rate that applies during that half hour period.

                                                    Page 1 of 1JH7                     DISK READ CHARGE RATES HELP

     This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is read from the disk.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during other time periods.  In addition, the amount that is charged during different times of the week can be varied.
     Each half hour is marked by the charge rate that applies during that half hour period.  You can change the charge during a single half hour by positioning the cursor on the half hour and then pressing the SELECT key.  You can change the charge during a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block, and then pressing the SELECT key.
     To not charge during a time period, change the charge rate during that time period to No Charge (charge multiplier of 0).

                                                          Page 1 of 1CAB                   DISK WRITE CHARGE RATES HELP

     This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is written to the disk.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during others.  In addition, the amount that is charged during different time periods of the week can be varied.

     Each half hour is marked by the charge rate that applies during that half hour period.

                                                   Page 1 of 1
JH*                     DISK WRITE CHARGE RATES HELP

     This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is written to the disk.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during others.  In addition, the amount that is charged during different time periods of the week can be varied.
     Each half hour is marked by the charge rate that applies during that half hour period.  You can change the charge during a single half hour by positioning the cursor on the half hour and then pressing the SELECT key.  You can change the charge during a larger time block by positioning the cursor at the beginning of the time block, pressing the MARK key, moving the cursor to the end of the time block, and then pressing the SELECT key.
     To make no charge during a time period change the charge rate during that time period to No Charge (charge multiplier of 0).

                                                          Page 1 of 1`'	
><≡                 ALLOWED LOGIN TIMES HELP

     This window allows you to specify the times during the week when this user is allowed to be logged in to the file server.  The week is divided up into half hour time blocks. If the user is allowed to be logged in during the half hour block, the block should be marked with an asterisk (*).  If the user is not allowed to be logged in, the half hour block should be marked with a space ( ).

                                              Page 1 of 2X%NLù                         ALLOWED LOGIN TIMES HELP

     The following keys can be used to change whether a user can be logged in.

INSERT key or the asterisk (*) key
     Specifies that the user is allowed to log in.

DELETE key or the space ( ) key
     Specifies that the user is not allowed to log in.

SELECT key
     Reverses the current setting(s).

     You can change a large block of time by positioning the cursor at one corner of the time block, pressing the MARK key and then moving the cursor to the other corner of the time block before pressing one of the keys listed above.
                                                              Page 2 of 2	
><╙                 ALLOWED LOGIN TIMES HELP

     This window shows the times during the week when this user is allowed to be logged in to the file server.  The week is divided up into half hour time blocks.  If the user is allowed to be logged in during the half hour block, the block is marked with an asterisk (*).  If the user is not allowed to be logged in, the half hour block is marked with a space ( ).

                                              Page 1 of 1
;
9µ             DEFAULT ACCOUNT EXPIRATION HELP

     Set this field to YES if you want new accounts to be created as temporary accounts that will automatically expire at a specified future date.  Set this field to NO if new accounts should be created as permanent accounts. After entering the desired option, press the SELECT or ESCAPE key.

     If you do not want to change this field press the CANCEL key and then the ESCAPE key.

                                           Page 1 of 12	0.                FIELD EXIT HELP

     You have changed the contents of this field.  If you do not want to save the changes you made, select NO.  If you want to save the changes, select YES.  If you want to continue editing the field, press the ESCAPE key.

                                  Page 1 of 175▌          DEFAULT ACCOUNT EXPIRATION DATE

     Enter the default account expiration date for any new user accounts that are created.  The account will be automatically disabled by the file server after the expiration date is past.

     After you have entered the date, press the SELECT or ESCAPE key.

     If you have changed the date but do not want to save the changed date, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 1
64C          DEFAULT LIMIT CONNECTIONS HELP

     If you want new user accounts to be created with the limit connections restriction set to yes,  enter YES.  If you do not want the connections to be limited, enter NO.  When you have finished, press the SELECT or ESCAPE key.

     If you do not want to change this field, press the CANCEL key and then the ESCAPE key.

     If the limit connections option is set to YES, you can enter a value for the maximum number of workstations that a user can be logged in to at the same time.

                                      Page 1 of 1:8Φ           DEFAULT MAXIMUM CONNECTIONS HELP

     The maximum connections limit is the maximum number of workstations on which a user can be logged in at the same time.

     Enter the default maximum number of connections for new user accounts that are created.  When you have finished, press the SELECT key or the ESCAPE key.

     If you do not want to save any changes you have made, press the CANCEL key and then the ESCAPE key.

                                          Page 1 of 1&7
?=Ç               DEFAULT REQUIRE PASSWORD HELP

     If you want to require new users to have a password,  enter YES.  Otherwise, enter NO.  When you have finished, press the SELECT or ESCAPE key.

     If you do not want to save the changes you have made to this setting, press the CANCEL key before pressing the ESCAPE key.

                                               Page 1 of 2
Ä5	=;╠               DEFAULT REQUIRE PASSWORD HELP

     If a password is required and the user does not have a password of the minimum required length, the user will be told his password has expired when he logs in.

     In addition, if the "Limit Grace Logins" option is set to YES, the user will be locked out of his account if he has not assigned a password to his account within the grace login period.

                                             Page 2 of 2¢:42y         DEFAULT MINIMUM PASSWORD LENGTH

     Enter the default minimum password length that should be used when new user accounts are created.

     After you have entered the length, press the SELECT or the ESCAPE key.

     If you have made changes that you do not want to save, press the CANCEL key and then the ESCAPE key.

                                    Page 1 of 2
9	=;╙             DEFAULT MINIMUM PASSWORD LENGTH

     If a password is required and the user does not have a password of the minimum required length, the user will be told his password has expired when he logs in.

     In addition, if the "Limit Grace Logins" option is set to YES, the user will be locked out of the account if he or she has not assigned a password to the account within the grace login period.

                                             Page 2 of 2	=;*           DEFAULT FORCE PASSWORD CHANGES HELP

     If you want all new users created to be required to change their passwords at regular intervals, enter YES.  Otherwise, enter NO.  When you have entered your selection, press the SELECT key or the ESCAPE key.

     If you have made changes to this entry that you do not want to save, press the CANCEL key and then the ESCAPE key.

     If this option is set to YES, you can enter the number of days after which the user's password will expire.

                                             Page 1 of 1P@31p     DEFAULT PASSWORD EXPIRATION INTERVAL

     Enter the default number of days a user can use the same password.  After you have entered the number of days, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                  Page 1 of 1╚>20¡      DEFAULT PASSWORD EXPIRATION INTERVAL

     When a user has used a password for the specified number of days, he or she will be told that the password has expired and should be changed.  

     In addition, if the "Limit Grace Logins" option is set to YES, the user will not be allowed to log in again if the password is not changed within the specified number of grace logins.

                                  Page 2 of 26D	=;	              DEFAULT LIMIT GRACE LOGINS HELP

     If you want to limit the number of times new users can log in with an expired password, set this option to YES.  If the user should be able to log in with an expired password indefinitely, set this option to NO.  After you have made your selection, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                             Page 1 of 2BA?╤               DEFAULT LIMIT GRACE LOGINS HELP

     If this option is set to YES, you can enter the number of times the user can continue to log in with an expired password.  If the user does not change the password within the specified number of grace logins, the user will not be allowed to log in.  

     You can grant the user additional grace logins or change the user's password expiration date.

                                                 Page 2 of 2òG20^           DEFAULT GRACE LOGINS HELP

     Enter the number of grace logins for new user accounts that are created.  When you have finished, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                  Page 1 of 2F:8D               DEFAULT GRACE LOGINS HELP

      The user will be given a specified number of grace logins to log in using an expired password.  Each time the user logs in during the grace login period, the user will be informed that the password has expired and will be asked to change it.  

     If the password is not changed before the grace logins are used up, the user will not be able to log in again until the supervisor assigns additional grace logins or sets the password expiration date to a date that is not past.

                                          Page 2 of 2╒K?=╠             DEFAULT REQUIRE UNIQUE PASSWORDS

     If you want to require new users to use a new password each time they change their password, set this option to YES.  Otherwise, set this option to NO.  When you have made your selection, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save the change, press the CANCEL key and then the ESCAPE key.

                                               Page 1 of 2±ICA                DEFAULT REQUIRE UNIQUE PASSWORDS

     If a user is required to have unique passwords, the file server will remember the user's previous passwords.  The user will not be allowed to change the password to one that was previously used.

     A user can change the password several times the same day without the file server remembering the new passwords as passwords that the user has previously used.  This keeps passwords that the user has not really used from being locked out as previous passwords by the file server.  

     It also keeps users who do not want to change their passwords from cycling through a large number of passwords until the file server forgets the password they were just using.

                                                   Page 2 of 27
5╦               LIMIT DISK SPACE HELP

     If you want to limit the amount of disk space newly created users can use, enter YES.  If you do not want to limit the default amount of disk space they can use, enter NO.  When you have made your entry, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save the change, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 1DB╧                     MAXIMUM DISK SPACE HELP

     Enter the maximum disk space that a user should be able to use on the file server.  Enter the amount of disk space in kilobytes (1K is 1024 bytes).  Since disk space is allocated in 4K blocks, the amount of space you enter will be rounded up to a 4K boundery.  When determing how much disk space a file is using, you must round up the size shown in a directory listing to the next 4K boundery.

     When you have entered the disk space limit, press the SELECT key or the ESCAPE key.

     If you have changed this limit and do not want to save the changes, press the CANCEL key and then the ESCAPE key.

                                                    Page 1 of 1WLJ*                       DEFAULT RESTRICTIONS HELP

     This form lets you select the default restrictions that new users will have when their accounts are first created.  The entries have the following meaning.

ACCOUNT HAS EXPIRATION DATE
     If this option is set to YES, it indicates that the account is only
     a temporary account.  Temporary accounts are automatically disabled
     at a specified date and cannot be used after that date unless the
     supervisor re-enables the account.  If this option is set to NO, 
     the account is permanent and does not have an expiration date.

DATE ACCOUNT EXPIRES
     If the "Account Has Expiration Date" field is set to YES, it              contains the date the the account expires.

                                                          Page 1 of 8nY╞SLJN                        DEFAULT RESTRICTIONS HELP

LIMIT CONCURRENT CONNECTIONS
     If this field is set to YES, the number of workstations to which the      user can be logged in at the same time is limited.  If this field is      set to NO, the user is not limited, and can log in from as many           stations as the server supports.

MAXIMUM CONNECTIONS
     If the "Limit Concurrent Connections" field is set to YES, this
     field specifies how many stations the user can log in from at the
     same time.

                                                             Page 2 of 8å\WLJ                        DEFAULT RESTRICTIONS HELP

REQUIRE PASSWORD
     If this option is set to YES, the user is required to have a
     password on the account.  If this option is set to NO, the user is
     not required to have a password.  If the user is not required to
     have a password, he or she can choose to assign a password to the         account.  Note that the "Require Password" option must be set to YES      in order to require the user to change the password.

MINIMUM PASSWORD LENGTH
     If the "Require Password" field is set to YES, this field                 contains the minimum length of the required password.  This length        can be between 1 and 20 characters.

                                                            Page 3 of 8ç_nYLJΘ                        DEFAULT RESTRICTIONS HELP

FORCE PERIODIC PASSWORD CHANGES
     If the "Require Password" field was set to YES, this field
     indicates whether the user is required to change the password at          regular intervals.  If this field is set to YES, the user's password      will expire periodically.  The user will be asked to change the           password.  If this field is set to NO, the user's password will           never expire.

DAYS BETWEEN FORCED CHANGES
     If the "Force Periodic Password Changes" field is set to YES, this        field contains the number of days the user can use a password             before the password expires.

                                                            Page 4 of 8╢cå\LJ                        DEFAULT RESTRICTIONS HELP

LIMIT GRACE LOGINS
     If the "Force Periodic Password Changes" field is set to YES, this        field indicates whether the user is forced to change the                  password, or if an expired password is simply a reminder to change        to a new password.  If this field is set to YES, the user has a           limited number of chances to change the password.  If the user does       not change the password within the specified limit, he or she will        no longer be able to log in.  If this field is set to NO, the user        will not be required to change the password when it expires.

GRACE LOGINS ALLOWED
     If the "Limit Grace Logins" field is set to YES, this field
     indicates the number of chances the user gets to change his password
     after it has expired.  If the password is not changed within the          specified number of logins, the user will not be allowed to               log in.
                                                            Page 5 of 8fç_L
J6                        DEFAULT RESTRICTIONS HELP

REQUIRE UNIQUE PASSWORDS
     If the "Require Password" field is set to YES, this field
     indicates whether the user will be forced to use a different
     password each time the password is changed.  

     If this option is set to NO, the user can change the password to any      password, even one previously used.  If this option is set to YES,        the user will not be allowed to change to a previously used               password.

                                                            Page 6 of 85i╢cLJ                         DEFAULT RESTRICTIONS HELP

ACCOUNT BALANCE
     If accounting is supported by the selected file server, this
     field will specify the account balance that will be given to a new
     user when the user account is first created.

ALLOW UNLIMITED CREDIT
     If accounting is supported by the selected file server, this
     field indicates whether a new user will be given unlimited credit
     when the user account is first created.  

     If this field is set to YES, the user will be never be denied             services because of insufficient account funds.  If it is set to NO,      the user will be denied services when the account balance drops           below the low balance limit.

                                                            Page 7 of 8f97               DEFAULT RESTRICTIONS HELP

LOW BALANCE LIMIT
     If accounting is supported by the selected file
     server and "Allow Unlimited Credit" is set to NO,
     this field indicates the lowest balance the
     user can have and still receive services that are
     being charged for.  

     If the user's account balance drops below the low      balance limit, the user will be denied any             additional services that are being charged for.

                                         Page 8 of 8PN╕                            ACCOUNT BALANCE HELP

     This form shows the user's current account balance and the user's credit limit.  The account balance is the amount of funds the user currently has.  Each time the user is charged for a service, his or her account balance is decreased.
     The credit limit determines how low the user's account balance can drop before the user will no longer receive services that are being charged for.  If the user is given unlimited credit, services will always be available.  The account balance will only serve as an indicator of how much service the user is receiving.  If the user has limited credit, the user will no longer receive services that are being charged for when the account balance falls below the specified credit limit.
     A credit limit of 0 means the user cannot receive any further services when the account balance drops below zero.  A negative credit limit means the user's account is allowed to go in the hole, until it reaches the credit limit.  A positive credit limit means the user is required to keep the specified amount of funds in the account at all times.
                                                                Page 1 of 1

64O    CHANGE MULTIPLE USERS ACCOUNT BALANCE HELP

     If you want all the marked users' account balances and credit limits to be set to these values, select YES.  If you do not want them set to these values, select NO.

     If you want to edit the values again, press the ESCAPE key.

                                      Page 1 of 1
CAk                      ACCOUNT BALANCE HELP

     Enter the desired account balance amount.  When you are finished, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save the changes, press the CANCEL key and then the ESCAPE key.

     The account balance is the user's current balance on the file server.  The account balance will be decreased each time the user is charged for a service.  The account balance should be incremented by the supervisor when the user account needs to be given additional funds.

                                                   Page 1 of 1FDJ                    ALLOW UNLIMITED CREDIT HELP

     If you want the user to be given unlimited credit on the file server, set this option to YES.  Otherwise, set this option to NO.  When you have made your selection, press the SELECT key or the ESCAPE key.

     If you have made changes to this setting and do not want to save the changes, press the CANCEL key and then the ESCAPE key.

     If a user account is given unlimited credit, the user will continue to reveive services no matter how low his account balance falls.  If a user does not have unlimited credit, specify the exact amount of credit that the user should be given.  If the user's account balance drops below the defined credit limit, the user will no longer receive services for which there is a charge.

                                                      Page 1 of 1HFφ                         CREDIT LIMIT HELP

     The credit limit specifies the lowest balance the user can have in an account balance and still receive services that are being charged for.  If the credit limit is set to 0, the user will not be able to receive additional services when his account balance drops to zero.  If the credit limit is set to a negative amount, the user is allowed to "charge" additional services after his account balance falls below zero, until the account balance reaches the credit limit. If the credit limit is a positive amount, the user will not be able to use all of his account balance, but will be required to have some minimum amount of funds in his account at all times.

     Enter the credit limit for the user.  When you are finished, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save the changes, press the CANCEL key and then the ESCAPE key.
                                                        Page 1 of 175■               DETECT INTRUDERS HELP

     Enter YES in this field if you want the file server to detect when an intruder is trying to break into an account.  If you do not want the file server to detect an intruder trying to break into an account, enter NO.  When you have entered your selection, press the SELECT key or the ESCAPE key.

     If you have made changes to this setting that you do not want saved, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 197»            INCORRECT LOGIN ATTEMPTS HELP

     Enter the number of successive incorrect login attempts before the file server will assume that an intruder is trying to break into an account.  When you are finished, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                        Page 1 of 1758        BAD LOGIN COUNT RETENTION TIME HELP

     The "Bad Login Count Retention Time" is used to clear the bad login count if no additional incorrect attempts have been made to log in to the account for the specified length of time.

     Enter the days, hours, and minutes that bad login attempts should be remembered.  When you have entered the number, press the SELECT key or the ESCAPE key.

     If you have made changes to this field and do not want to save them, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 18
6╧         LOCK ACCOUNT AFTER DETECTION HELP

     If you want an account to be locked when an intruder is detected, set this option to YES.  If you do not want the account to be locked, set this option to NO.  After you have entered your selection, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                        Page 1 of 1
åA?p               INTRUDER DETECTION/LOCKOUT HELP

     Intruder detection and lockout allows you to specify whether attempts to log in to the file server with invalid passwords will be detected and recorded.  In addition, it allows you to optionally lock an account when an intruder is detected.  Each entry is described below.

DETECT INTRUDERS
     If this option is set to YES, the file server will
     record repeated attempts to log in to an account with an
     invalid password.  If this option is set to NO, the file
     server will not detect intruders.

                                                 Page 1 of 5ÇèàâNL[                    INTRUDER DETECTION/LOCKOUT HELP

INCORRECT LOGIN ATTEMPTS
     This entry is used by the file server to determine when an
     intruder is attempting to break into an account and when a user has         mistyped the password.  The file server tracks the number of incorrect      login attempts that occur for each user account.  It resets the number      of incorrect logins for an account whenever the user successfully logs      in to the file server or when the the "Bad Login Count Retention Time"      has passed since the last bad login.  

     If the number of incorrect logins for a user reaches the number             entered in the "Incorrect Logins Attempts" field, the file server           will "detect" an intruder.  When an intruder is detected, an entry is       placed in the audit file and the file server error log file indicating      the address of the intruder and the account he was attempting to log        in to.  In addition, the account the intruder was attempting to log in      to can be locked.
                                                          Page 2 of 5	ì
åLJq                    INTRUDER DETECTION/LOCKOUT HELP

BAD LOGIN COUNT RETENTION TIME
     This field indicates the amount of time, after an incorrect login
     attempt, that must pass before the bad login attempt is
     forgotten by the file server.  Bad login attempts are immediately
     forgotten if the user logs in successfully.  Otherwise, the number
     of bad login counts is remembered until it reaches the limit
     specified in the "Incorrect Logins Attempts" field, or until the          the "Bad Login Count Retention Time" has passed.

                                                            Page 3 of 5äæÇèLJc                  INTRUDER DETECTION/LOCKOUT HELP

LOCK ACCOUNT AFTER DETECTION
     This field allows you to specify whether the file server should lock      an account that an intruder is attempting to log in to.  If this          field is set to YES, the file server will lock the account when an
     intruder is detected.  In addition, it will generate a note in the        audit file and in the system error log file.  If this field is set        to NO, a note indicating that an intruder was detected will be
     generated, but the account will not be locked.  

     If an account is locked, no one can log in to the account for the         length of time specified in the "Length of Account Lockout" field.        This is intended to make it impossible to log in by trying to guess       a password.  The account can be unlocked before the specified time        has passed by the network supervisor using SYSCON.  In addition, you      can unlock the network supervisor's account from the file server          console by typing ENABLE LOGIN.
                                                            Page 4 of 5	ì	
:8           INTRUDER DETECTION/LOCKOUT HELP

LENGTH OF ACCOUNT LOCKOUT
     If the "Lock Account after Detection" option is         set to YES, this field specifies the amount of          time that the account should be locked.

                                          Page 5 of 5üòJH┤                      INTRUDER LOCKOUT STATUS HELP

     This form shows the intruder lockout status of the selected user's account.  Each field is described below.

ACCOUNT LOCKED
     This field shows whether the account is currently locked because        an intruder was detected.  If the account is locked, you can            unlock it by changing this entry to NO.

INCORRECT LOGIN COUNT
     This field shows the current incorrect login count for the
     selected account.  This count is automatically reset to zero each
     time the user logs in successfully or when the "Account Reset           Time" is reached.
                                                          Page 1 of 3╬ÿ╡ÆIG5                      INTRUDER LOCKOUT STATUS HELP

ACCOUNT RESET TIME
     If the account is currently locked, this field shows the time
     when the account will be unlocked.  If the account is unlocked,
     but the "Incorrect Login Count" is one or more, this field shows       the time when the "Incorrect Login Count" will be reset to zero.
     Otherwise, this field is blank.

TIME UNTIL RESET
     If the account is currently locked, this field shows how much
     longer the account will be locked.  If the account is unlocked,  
     but the "Incorrect Login Account" is one or more, this field           shows how much time must pass before the "Incorrect Login              Account" will be reset to zero.  Otherwise this field is blank.

                                                         Page 2 of 3üòE
C▓                     INTRUDER LOCKOUT STATUS HELP

LAST INTRUDER ADDRESS
     If the account is locked, this field shows the address             of the workstation of the intruder who caused this account         to be locked.  Otherwise, this field shows the address of the
     last workstation on which somebody attempted to log in with        an incorrect password.

                                                     Page 3 of 3?=)                    ACCOUNT LOCKED HELP

     You can unlock an account that has been locked because of intruder detection.  To unlock an account (allow users to login to this account), enter NO.  To prevent users from logging in to this account, enter YES.  You cannot lock an account that is not currently locked.

      After you have made your selection, press the SELECT key or the ESCAPE key.

     If you have changed this field but do not want to save the change, press the CANCEL key.
 
                                              Page 1 of 1FD╘                   EDIT CHARGE MULTIPLIER HELP

     Enter the number you want to use for the charge rate multiplier and then press the SELECT key.

     If you do not want to change the number, press the ESCAPE key.

     The charge rate multiplier is used in determining how much will be charged for usage of a resource as follows:

         AmountUsed * Multiplier / Divisor = ChargeAmount

     Normally the multiplier should be much smaller than the divisor since the AmountUsed is usually larger than the desired ChargeAmount.  The amount that should be charged will depend on your particular setup and the value that you assign to each unit of money.

                                                      Page 1 of 1GE╙                     EDIT CHARGE DIVISOR HELP

     The charge rate divisor is used in determining how much will be charged for usage of a resource as follows:

         AmountUsed * Multiplier / Divisor = ChargeAmount

     Normally the divisor should be much larger than the multiplier since the AmountUsed is usually larger than the desired ChargeAmount.  The amount that should be charged will depend on your particular setup and the value that you assign to each unit of money.

     Enter the number that you want to use for the charge rate divisor and then press the SELECT key.

     If you do not want to change the number, press the ESCAPE key.

                                                       Page 1 of 1
üÑFD╣                      ENTER CHARGE RATE HELP

     This form allows you to enter a new charge rate.  A charge rate consists of a multiplier and a divisor that are used to change the amount of resource being used into a charge amount as follows.
     
         AmountUsed * Multiplier / Divisor = ChargeAmount

Normally the amount of resource used is much larger than the amount that should be charged, so the amount entered for the divisor should be much larger than the amount entered for the multiplier.  The amount that should be charged will depend on your particular setup and the value that you assign to each unit of money.

                                                      Page 1 of 2░óEC═                     ENTER CHARGE RATE HELP

     To change the charge rate amount, highlight the number to be changed and type in the new number.  To edit the number that is already entered, highlight the number to be edited and press the SELECT key.

     To set the charge amount to No Charge, enter 0 as the multiplier.

     When you have set the charge rate you want, press the ESCAPE key.

                                                     Page 2 of 2
53             ACCOUNT DISABLED HELP

     If you do not want this account to be used, but do not want to delete the account, enter YES.  If you want the user to be able to use this
account, enter NO.  If the account will never be used again, you should delete the account rather than disable it.  When you have finished, press the SELECT key or the ESCAPE key.  

     If you have made changes to this setting but do not want to save the changes, press the CANCEL key and then the ESCAPE key.

                                     Page 1 of 1
A?╞                     ACCOUNT EXPIRES HELP

     Set this field to YES if this account is a temporary account that should automatically expire at a specified future date.  Set this field to NO if this account is a permanent account.  After entering the desired option, press the SELECT or ESCAPE key.

     If you do not want to change this field, press the CANCEL key and then the ESCAPE key.

                                                 Page 1 of 1
A?╛                   ACCOUNT EXPIRATION DATE

     Enter the date that this account should expire.  This account will be automatically disabled by the file server after the expiration date is past.  After you have entered the date, press the SELECT or ESCAPE key.

     If you have changed the date but do not want to save the changed date, press the CANCEL key and then the ESCAPE key.

                                                 Page 1 of 1@>[                   LIMIT CONNECTIONS HELP

     If you want the number of workstations at which this user can be simultaneously logged in to be limited, enter YES. If you do not want the connections to be limited, enter NO.  When you have finished, press the SELECT or ESCAPE key.

     If you do not want to change this field, press the CANCEL key and then the ESCAPE key.

     If the limit connections option is set to YES, then you can enter a value for the maximum number of workstations that a user can be logged in to at the same time.

                                                Page 1 of 1
<:┘                  MAX CONNECTIONS HELP

     Enter the maximum number of simultaneous connections this user can have.  When you have finished, press the SELECT key or the ESCAPE key.

     If you do not want to save any changes you have made, press the CANCEL key and then the ESCAPE key.

     The maximum connections limit is the maximum number of workstations that the user can be logged in from at the same time.

                                            Page 1 of 1CA∞              ALLOW USER TO CHANGE PASSWORD HELP

     If the user should be able to change the password, enter YES.  If this account will be used by several people and they should not be able to change the password, enter NO.  When you have entered your selection, press the SELECT key or the ESCAPE key.

     If you have made changes to this setting that you do not want to save, press the CANCEL key and then the ESCAPE key.

                                                   Page 1 of 1L╡
64|               REQUIRE PASSWORD HELP

     If you want to require this user to have a password on this account, enter YES.  Otherwise, enter NO.  When you have finished, press the SELECT or ESCAPE key.

     If you have made changes to this setting that you do not want saved, press the CANCEL key before pressing the ESCAPE key.

                                      Page 1 of 2╕│	=
;═                  REQUIRE PASSWORD HELP

     If a password is required and the user does not have a password of the minimum required length, the user will be told the password has expired when the user logs in.

     In addition, if the limit grace logins option is set to YES, the user will be locked out of the account if a password has not been assigned to the account within the grace login period.

                                             Page 2 of 2¼╕

<:c              MINIMUM PASSWORD LENGTH HELP

     Enter the minimum required length of the user's password.  After you have entered the length, press the SELECT or ESCAPE keys.

     If you have made password length changes that you do not want to save, press the CANCEL key and then the ESCAPE key.

                                            Page 1 of 11╖	><╘               MINIMUM PASSWORD LENGTH HELP

     If a password is required and the user does not have a password of the minimum required length, the user will be told his password has expired when he logs in.

     In addition, if the "Limit Grace Logins" option is set to YES, the user will be locked out of the account if he or she has not assigned a password to the account within the grace login period.

                                              Page 2 of 2 ?=            FORCE PERIODIC PASSWORD CHANGES HELP

     If you want this user to change the password at regular intervals, enter YES.  Otherwise, enter NO.  When you have entered your selection, press the SELECT key or the ESCAPE key.

     If you do not want to save the changes made to this entry, press the CANCEL key and then the ESCAPE key.

     If this option is set to YES, you can enter the number of days after which the user's password will expire.

                                             Page 1 of 1
53        DAYS BETWEEN FORCED CHANGES HELP

     Enter the number of days for which a user can use the same password.  After you have entered the number of days, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

     After the specified number of days, the user will be informed that the password has expired when he or she logs in to the file server.

                                     Page 1 of 1
	><Ñ                DATE PASSWORD EXPIRES HELP

     Enter the next date when this user's password should expire.  If you enter a date too far in the future, the date will be changed to the current date plus the number of DAYS BETWEEN FORCED CHANGES when this user's restrictions are saved.  When you have entered the password expiration date, press the SELECT key or the ESCAPE key.

     If you have changed this date but do not want to save the change, press the CANCEL key and then the ESCAPE key.

     Note that this date will be automatically recalculated by the file server each time the user changes the password.

                                              Page 1 of 1º├
<:                  LIMIT GRACE LOGINS HELP

     If you want to limit the number of times this user can log in with an expired password, set this option to YES.  If the user should be able to log in with an expired password indefinitely, set this option to NO.  After you have made your selection, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                            Page 1 of 2ï┴
A?∙                   LIMIT GRACE LOGINS HELP

     If this option is set to YES, you can enter the number of times the user can continue to log in with the expired password.  If the user does not change the password within the specified number of logins, he or she will not be allowed to log in again, until the network supervisor grants the user additional grace logins or changes the user's password expiration date to a date that is not past.

                                                 Page 2 of 2N╟7
5~             GRACE LOGINS ALLOWED HELP


     Enter the number of grace logins that users should be allowed after their passwords have expired.  When you are finished, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 2╕┼B@░                  GRACE LOGINS ALLOWED HELP

     After a user's password has expired, the user will be given the specified number of grace logins using the expired password.  Each time he logs in, he will be informed that the password is expired and asked to change it.  If the password is not changed before the grace logins are used up, the user will not be able to log in again until the supervisor allows additional grace logins or sets the password expiration date to a date that is not past.

     When the user changes the password, the "Grace Login Allowed" value is used to reset the "Remaining Grace Logins" field.

                                                  Page 2 of 2	><τ               REMAINING GRACE LOGINS HELP

     This field shows the number of remaining grace logins that the user has.  Each time the user logs in with an expired password, the file server decreases this number.  When this number reaches zero, the user will not be allowed to log in.  The file server will reset this number to the value in "Grace Logins Allowed" each time the user changes the password.

     Set the number of remaining grace logins to the number of times that the user can log in with an expired password, then press the SELECT key or the ESCAPE key.

     If you have changed this number but do not want to save it, press the CANCEL key and then the ESCAPE key.

                                              Page 1 of 1≥╬9
7┼            REQUIRE UNIQUE PASSWORDS HELP

     If you want to require this user to use a new password each time he or she changes the password, set this option to YES.  Otherwise, set this option to NO. When you have made your selection, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save the change, press the CANCEL key and then the ESCAPE key.

                                         Page 1 of 2═B@	                 REQUIRE UNIQUE PASSWORDS HELP

     If a user is required to have unique passwords, the file server will remember the user's previous passwords.  The user will not be allowed to change the password to a password that has been previously used.

     A user can change passwords several times the same day without the file server remembering that the new passwords were previously used.  This keeps passwords that the user has not  used for at least a day from being locked out as previous passwords by the file server.  

     This also prevents users from cycling through a large number of passwords until the file server forgets the password they were just using and allows them to use it again.

                                                   Page 2 of 27
5╖               LIMIT DISK SPACE HELP

     If you want the amount of disk space this user  can use to be limited, enter YES.  If you do not want the amount of disk space to be limited, enter NO.  When you have made your entry, press the SELECT key or the ESCAPE key.

     If you have changed this setting and do not want to save the change, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 1DB-                     MAXIMUM DISK SPACE HELP

     Enter the maximum disk space that this user should be able to use on the file server.  Enter the amount of disk space in kilobytes (1K is 1024 bytes).  Since disk space is allocated in 4K blocks, the amount of space you entered will be rounded up to a 4K boundery.  Keep in mind that files are also allocated in 4K blocks so the actual disk space that a file is using is usually larger than the file size show by a directory listing (the size must be rounded up to the next 4K boundery).

     When you have entered the disk space limit, press the SELECT key or the ESCAPE key.

     If you have changed this limit and do not want to save the changes, press the CANCEL key and then the ESCAPE key.

                                                    Page 1 of 1ë┘A?J              SET MULTIPLE USERS RESTRICTIONS HELP

     This form shows restrictions that can be placed on the marked users' account.  Each of the fields on this form are described below.  Note that the fields associated with limiting disk space will not appear if that option was not selected during the file server installation.

ACCOUNT DISABLED
     If this field is set to YES, the user's account is
     disabled.  The user cannot log in to the file server
     again until the "Account Disabled" field is set to NO.

                                                Page 1 of 11
6▄'╫LJò                    SET MULTIPLE USERS RESTRICTIONS HELP

ACCOUNT HAS EXPIRATION DATE
     If this option is set to YES, it indicates that the account is only
     a temporary account.  Temporary accounts are automatically disabled
     at a specified date and cannot be used after that date unless the
     network supervisor re-enables the account.  If this option is set to      NO, the account is permanent and does not have an expiration date.

DATE ACCOUNT EXPIRES
     If the field "Account Has Expiration Date" is set to YES, this
     field contains the date the account expires.

                                                           Page 2 of 11ù▐ë┘LJI                    SET MULTIPLE USERS RESTRICTIONS

LIMIT CONCURRENT CONNECTIONS
     If this field is set to YES, the number of workstations from which a      user can log in simultaneously is limited.  If this field is set to       NO, the user can log in from as many stations as the server               supports.

MAXIMUM CONNECTIONS
     If the "Limit Concurrent Connections" field is set to YES, it             specifies the maximum number of stations that the user can log
     in from at the same time.

                                                           Page 3 of 11⌠ß6▄GEE               SET MULTIPLE USERS RESTRICTIONS HELP

ALLOW USER TO CHANGE PASSWORD
     If this field is set to YES, the user can change the password
     associated with the account.  If this field is set to NO, the
     user cannot change the password.  (Only a user with
     supervisor privileges can change the password.)

     This option is intended for use with accounts that many people
     will share, such as the GUEST account.  On these types of            accounts, a user who knows the password should not be able to        change the password and lock other users out.  If this option        is set to NO, the user cannot change the password.  In               addition, SYSCON will not allow the user to edit the login           script for the account.

                                                      Page 4 of 11εΣù▐LJΓ                  SET MULTIPLE USERS RESTRICTIONS HELP

REQUIRE PASSWORD
     If this option is set to YES, the user is required to have a
     password on the account.  If this option is set to NO, the user is
     not required to have a password.  If a password is not required, the      user can choose whether to assign a password on the account.  Note        that a password must be required in order to require the user to          change the password.

MINIMUM PASSWORD LENGTH
     If the "Require Password" field is set to YES, this field contains        the minimum length of the required password.  This length can be          between 1 and 20 characters.

                                                           Page 5 of 11RΦ⌠ßLJL                   SET MULTIPLE USERS RESTRICTIONS HELP

FORCE PERIODIC PASSWORD CHANGES
     If the "Require Password" field is set to YES, and the "Allow User        to Change Password" field is set to YES, this field indicates             whether the user is required to change the password at regular            intervals.  If this field is set to YES, the user's password will         expire periodically and the user will be asked to change the              password.  If this field is set to NO, the user's password will           never expire.

DAYS BETWEEN FORCED CHANGES
     If the "Force Periodic Password Changes" field is set to YES, this        field contains the number of days for which the user can use a            password before the password expires.

                                                           Page 6 of 11¥∞εΣNL3                   SET MULTIPLE USERS RESTRICTIONS HELP

DATE PASSWORD EXPIRES
     If the "Force Periodic Password Changes" field is set to YES, this          field indicates the next date on which the user's password expires.
     After this date is past, the file server will inform the user that the
     password has expired each time the user logs in to the file server.         In addition, if the "Limit Grace Logins" field is set to YES, the           file server will not allow a user to log in if the expired password         has not been changed within the specified number of grace logins.

     Each time the user changes his password, the file server will set the
     next password expiration date automatically.  If the network                supervisor changes a user's password, the file server will mark the         password as expired, forcing the user to select a new password              (except in the case where the user is not allowed to change the             password).

                                                               Page 7 of 11╗≡RΦMK                 SET MULTIPLE USERS RESTRICTIONS HELP

LIMIT GRACE LOGINS
     If the "Force Periodic Password Changes" field is set to YES, this
     field indicates whether the user is forced to change the password,
     or whether an expired password is simply a reminder to change to a         new password.  If this field is set to YES, the user has a limited
     number of chances to change the password.  If the password is not          changed within the specified limit, the user will no longer be able        to log in.  If this field is set to NO, the user will not be
     required to change the password when it expires.

GRACE LOGINS ALLOWED
     If the "Limit Grace Logins" field is set to YES, this field indicates      the number of chances the user gets to change the password
     when it is expired.  If the user does not change the password within
     the specified number of logins, the user will not be allowed to            log in.
                                                            Page 8 of 11ï≤¥∞?=╕            SET MULTIPLE USERS RESTRICTIONS HELP

REMAINING GRACE LOGINS
     If the "Limit Grace Logins" field is set to YES,             this field shows the remaining number of times that the      user can log in using an expired password.  When this        number reaches zero, the user will not be allowed to         log in again until the network supervisor gives the          user more grace logins, or changes the password              expiration date so that the password is not expired.  

     This field is automatically reset to the value in the        "Grace Logins Allowed" option each time the password is      changed.

                                              Page 9 of 11 ═⌡╗≡A?*             SET MULTIPLE USERS RESTRICTIONS HELP

REQUIRE UNIQUE PASSWORDS
     If the "Require Password" field is set to YES, this
     field indicates whether the user should be forced to use
     a different password each time the password is changed. 
     If this option is set to NO, the user can change the
     password to any password, even one previously used.  If        this option is set to YES, the user will not be allowed        to change the password to one previously used.

                                               Page 10 of 11ï≤LJ╠                 SET MULTIPLE USERS RESTRICTIONS HELP

LIMIT DISK SPACE
     This option will appear only if the option to track the amount of
     disk space a user is using was selected during the file server
     installation.  If this field is set to NO, the user can use as much
     disk space as there is available.  If this option is set to YES,          the "Maximum Disk Space" field specifies the maximum amount of            file server disk space that the user can use.

MAXIMUM DISK SPACE
     If the "Limit Disk Space Option" is set to YES, this field
     specifies the maximum amount of disk space the user can use.  Since
     disk space is allocated in blocks of 4K (4096 bytes), this field is
     used to specify how many blocks a user can allocate.  You must round      the file's size up to the next 4K boundary when determining the           amount of disk space it is using.

                                                          Page 11 of 112
0G   SAVE RESTRICTIONS FOR MULTIPLE USERS HELP

     If you want all the marked users' restrictions to be set to these restrictions,  select YES.  If you do not want them set to these restrictions, select NO.  If you want to continue editing the restrictions, press the ESCAPE key.

                                  Page 1 of 1
p²A?H                   ACCOUNT RESTRICTIONS HELP

     This form shows restrictions that have been placed on the selected user's account.  Each of the fields on this form are described below.  Note that the fields associated with limiting disk space will not appear if that option was not selected during the file server installation.

ACCOUNT DISABLED
     If this field is set to YES, the user's account is
     disabled.  The user cannot log in to the file server
     again until the "Account Disabled" field is set to NO.

                                                Page 1 of 11√LJ}                       ACCOUNT RESTRICTIONS HELP

ACCOUNT HAS EXPIRATION DATE
     If this option is set to YES, the account is a temporary account.         Temporary accounts are automatically disabled at a specified date         and cannot be used after that date, unless the network supervisor         re-enables the account.  If this option is set to NO, the account is      permanent and does not have an expiration date.

DATE ACCOUNT EXPIRES
     If the "Account Has Expiration Date" field is set to YES, this field      contains the date the account expires.

                                                         Page 2 of 11ep²LJH                        ACCOUNT RESTRICTIONS HELP

LIMIT CONCURRENT CONNECTIONS
     If this field is set to YES, the number of workstations to which the      user can be logged in at the same time is limited.  If this field is      set to NO, the user can log in from as many stations as the server        supports.

MAXIMUM CONNECTIONS
     If the "Limit Concurrent Connections" field is set to YES, this
     field specifies the maximum number of stations that the user can log
     in from at the same time.

                                                           Page 3 of 11ÿFD                    ACCOUNT RESTRICTIONS HELP

ALLOW USER TO CHANGE PASSWORD
     If this field is set to YES, the user can change the                account's password.  

     If this field is set to NO, the user cannot change the              account's password.  In addition, SYSCON will not allow the         user to edit the login script for the account.  Only a user         with supervisor privileges can change the password and edit         the login script.

     This option is intended for use with accounts that many people
     will share, such as the GUEST account.  On these types of           accounts, a user who knows the password should not be able to       change the password and lock other users out.    

                                                      Page 4 of 11ÑeLJ⌡                       ACCOUNT RESTRICTIONS HELP

REQUIRE PASSWORD
     If this option is set to YES, the user is required to have a
     password on the account.  If this option is set to NO, the user is
     not required to have a password.  If the user is not required to
     have a password, he or she can choose whether to have a password on       the account.  The "Require Password" option must be set to YES in         order to require the user to change the password.

MINIMUM PASSWORD LENGTH
     If the "Require Password" field is set to YES, this field indicates       the minimum length of the required password.  This length can be          between 1 and 20 characters.

                                                           Page 5 of 11⌡ÿLJ8                       ACCOUNT RESTRICTIONS HELP

FORCE PERIODIC PASSWORD CHANGES
     If the "Require Password" field is set to YES, and the "Allow User
     To Change Password" field is set to YES, the field indicating             whether or not the user is required to change the password at             regular intervals will appear.

     If this field is set to YES, the user's password will expire
     periodically and the user will be asked to change the password.  If       this field is set to NO, the user's password will never expire.

DAYS BETWEEN FORCED CHANGES
     If the "Force Periodic Password Changes" field is set to YES, it          will indicate the number of days the user can use a password before       the password expires.

                                                           Page 6 of 11ÑPN                         ACCOUNT RESTRICTIONS HELP

DATE PASSWORD EXPIRES
     If the "Force Periodic Password Changes" field is set to YES, it will         indicate when the user's password will expire.  

     After this date is past, each time the user logs in to the file server,       the file server will inform the user that the password has expired.  In       addition, if the "Limit Grace Logins" field is set to YES, the file           server will not allow a user to log in if the expired password has not        been changed within the specified number of grace logins.

     Each time the user changes the password, the file server will set the
     next password expiration date automatically.  If the network supervisor       changes a user's password, the file server will mark the password as          expired, forcing the user to select a new password (except in the case        where the user is not allowed to change the password).
                                                             Page 7 of 115⌡MK                       ACCOUNT RESTRICTIONS HELP

LIMIT GRACE LOGINS
     If the "Force Periodic Password Changes" field is set to YES, this         field indicates whether the user is forced to change the password,
     or whether an expired password is simply a reminder to change to a         new password.  If this field is set to YES, the user has a limited
     number of chances to change the password.  If the user does not
     change the password within the specified limit, he or she will no          longer be able to log in.  If this field is set to NO, the user            will not be required to change the password when it expires.

GRACE LOGINS ALLOWED
     If the "Limit Grace Logins" field is set to YES, this field
     indicates the number of chances the user gets to change the password
     when it is expired.  If the user does not change the password within
     the specified number of logins, he or she will not be allowed to
     log in.
                                                            Page 8 of 11
■?=▒                ACCOUNT RESTRICTIONS HELP

REMAINING GRACE LOGINS
     If the "Limit Grace Logins" field is set to YES,             this field shows the remaining number of times the           user can log in using an expired password.  When this        number reaches zero, the user will not be allowed to         log in again until the network supervisor gives the          user more grace logins, or changes the password              expiration date so that the password is not expired.         This field is automatically reset to the value in            "Grace Logins Allowed" each time the password is             changed.

                                              Page 9 of 11 R5A?<                  ACCOUNT RESTRICTIONS HELP

REQUIRE UNIQUE PASSWORDS
     If the "Require Password" field is set to YES, this
     field indicates whether the user should be forced to use
     a different password each time the password is changed. 

     If this option is set to NO, the user can change the
     password to any password, even one that was previously         used.  If this option is set to YES, the user will not be      allowed to change the password to one that was previously      used.

                                               Page 10 of 11
■LJÆ                        ACCOUNT RESTRICTIONS HELP

LIMIT DISK SPACE
     This option will appear only if the disk limitation option was            selected during the file server installation.  If this field is set       to NO, the user can use all the disk space available.  If this            option is set to YES, the "Maximum DIsk Space" field specifies the        maximum amount of disk space the user can use on the file server.

MAXIMUM DISK SPACE
     If the "Limit Disk Space" option is set to YES, this field
     specifies the maximum amount of disk space the user can use.  Since
     disk space is allocated in blocks of 4K (4096 bytes), this field is
     used to specify how many blocks are allocated to a user.  Round a         file's size to the next 4K boundary to determine the amount of            disk space it is using.

                                                          Page 11 of 11EC¡                  LENGTH OF ACCOUNT LOCKOUT HELP

     The "Length of Account Lockout" field is used to specify how long an account should be locked after an intruder is detected.  The intent of locking an account is to make it extremely difficult for an intruder to guess a password.

     Enter the days, hours, and minutes that an account should remain locked after an intruder is detected trying to break into the account.  When you have finished, press the SELECT key or the ESCAPE key.

     If you have made changes to this field and do not want to save the changes, press the CANCEL key and then the ESCAPE key.

                                                     Page 1 of 1NL░                            ACCOUNT BALANCE HELP

     This form shows the user's current account balance and the user's credit limit.  The account balance is the amount of funds that the user currently has.  Each time the user is charged for a service, his account balance is decreased.
     The credit limit determines how low the user's account balance can drop before that user will no longer receive services that are being charged for.  If given unlimited credit, the user will always be given services and the account balance will only serve as an indicator of how much service the user is receiving.  If the user has limited credit, he or she will no longer receive services that are being charged for when the account balance falls below the specified credit limit.
     A credit limit of 0 means the user cannot receive any further services when the account balance drops below zero.  A negative credit limit means the user's account is allowed to go in the hole, until it reaches the credit limit.  A positive credit limit means the user is required to keep the specified amount of funds in his account at all times.
                                                             Page 1 of 1?=┬                    NETWORK ADDRESS HELP

     You must know the address of the workstation from which you want this user to be able to log in.  If you do not know the address, log in on the workstation and type "userlist /a."   The entry that is marked with an asterisk (*) will show the address of the workstation.  Enter the network portion of the address in this edit box. (The network portion is the 8 digit hex number).

     When you have entered the address, press the SELECT key or the ESCAPE key.

     If you do not want to enter an address, press the CANCEL key or use the BACKSPACE key to delete all input. Then press the ESCAPE key.

                                               Page 1 of 1LJ~                             NODE ADDRESS HELP

     You must know the address of the workstation from which you want this user to be able to log in.  If you do not know the address, log in on the workstation and type "userlist /a."  The entry that is marked with an asterisk (*) will show the address of the workstation.  You should have entered the network portion of this address already.  If you did not, delete any entry you have made in this field and then press the ESCAPE key.  Otherwise, enter the node portion of the address in this edit box. (The node portion is the 12 digit hex number).

     When you have entered the address, press the SELECT key or the ESCAPE key.

     If you do not want to enter an address, press the CANCEL key or use the BACKSPACE key to delete all input.  Then press the ESCAPE key.

                                                            Page 1 of 1FD                     INSTALL ACCOUNTING HELP

     Accounting has not been installed on this file server.  If you install accounting, you can track when users log in and log out from the file server.   You can also set up account balances for users and charge them for services that they receive.  If you do not want to do these things, do not install accounting.

     If you want to install accounting, select YES.  Otherwise, select NO or press the ESCAPE key.

                                                      Page 1 of 1
CA                   CANCEL TIME CHANGES HELP

     If you want all the changes you have made to the time restrictions to be undone, answer YES.  Otherwise, answer NO or press the ESCAPE key.

     If you select YES, the time restrictions will be restored to the restrictions that applied before you started to edit them.

                                                   Page 1 of 1
;9   CHANGE STATION RESTRICTIONS FOR MULTIPLE USERS HELP

     If you want all the marked users to be restricted so they can only log in from the listed workstation addresses, select YES.  If you do not want the marked users' station restrictions to be changed, select NO.  If you want to edit the station restrictions again, press the ESCAPE key.

     If a user's station restriction list is set so no addresses are listed, the user can log in from any station.

                                           Page 1 of 1
;
9            ALLOW LOG IN FROM ALL NODES HELP

     If the selected user should be able to log in from any workstation on the specified network, highlight YES. If you want to specifically list the node addresses that the user is allowed to log in from, highlight NO.  When you have made your selection, press the SELECT key.

     If you do not want to allow users to log in from any workstation with the network address that you entered, press the ESCAPE key.

                                           Page 1 of 1
:	8j    SAVE TIME RESTRICTIONS FOR ALL MARKED USERS HELP

     If you want all the marked users' time restrictions to be changed to these restrictions, select YES.  If you do not want their time restrictions to be changed, answer NO.  If you want to continue editing the time restrictions, press the ESCAPE key.

                                          Page 1 of 1
?=q                 CANCEL CHARGE CHANGES HELP

     If you want all the changes you have made to these charge rates to be undone, select YES.  Otherwise, select NO or press the ESCAPE key.

     If you select YES, all the charge rates will be restored to the values they had when you first started editing them.

                                               Page 1 of 12
0`         CONFIRM CLEAR ERROR LOG HELP

     If you have finished looking at the errors recorded in the error log and want to clear them from the log, select YES.  If you will want to look at these errors at a later date,  select NO.  If you want to continue looking at the error log, press the ESCAPE key.

                                  Page 1 of 1√9B@m                 EDIT SYSTEM AUTOEXEC FILE HELP

     The AUTOEXEC.SYS file contains commands that the file server should automatically execute when it is first brought up.  Any commands that can be typed at the file server console can be entered in this file (with the exception of the DOWN command).

     Enter the commands exactly as you would at the file server console, one command per line.  When you are finished, press the ESCAPE key.  If you have made changes to this file and do not want to save them, press the CANCEL key and then the ESCAPE key.

                                                  Page 1 of 2v7LJf                    EDIT SYSTEM AUTOEXEC FILE HELP

     One of the main uses of the system autoexec file is to set up printing on the file server.  A sample system autoexec file is shown below.

Spool 0 to Queue LaserJet
Spool 1 to Queue LinePrinter
Spool 2 to Queue Management
Printer 0 add Queue LaserJet at Priority 5
Printer 0 add Queue Management at Priority 1
Printer 1 add Queue LinePrinter at Priority 1

     For a complete description of all commands that can be used in the system autoexec file, see the Console Reference Manual.

                                                            Page 2 of 2