; GEAR.INI file
;
;
[generic]
;
WorkingDirectory=
; Customer information:
CustomerName=
CustomerContact=
CustomerPhone=
MasterIDCode=
ReferenceCode=
UPCEANCode=
DiscTitle=
;
;
[generator]
;
SystemIdf=GEAR VERSION 3.0 JUNE 1994
PublisherIdf=
DataPreparerIdf=ELEKTROSON BV 1994
ApplicationIdf=
ApplicationUse=
CopyRightFileIdf=
AbstractFileIdf=
BibliographicFileIdf=
MaxNrDirsInVolume=500
MaxDirNestingLevel=8
; NonIsoNameHandling the determines how the software handles non-IS09660 names
;   Possible values are:
;   0) Dialog appears for each non-ISO9660 name
;   1) Ignore non-ISO9660 names
;   2) Translate non-ISO9660 names to upper case only
;   3) Translate non-ISO9660 names completely
NonIsoNameHandling=0
ArchiveOnly=FALSE
;
;
[tape]
;
; Parameters for premaster tape output:
DDPFormatTape=FALSE
; FileOption determines how tracks are written in tape files
;   Possible values are:
;   1) Separate files on separate tapes for each track
;   2) Separate files for each track on the same tape
;   3) Tracks of the same type are combined in one tape file
;   4) One contiguous image tape file including all tracks
FileOption=2
ISOTrackSectorSize=2048
ISOTrackBlockingFactor=4
ISOTrackWithPregapPostgap=FALSE
XATrackSectorSize=2336
XATrackBlockingFactor=4
XATrackWithPregapPostgap=FALSE
DATrackWithPause=FALSE
ScramblingFor2352Sectors=FALSE
WriteIdentTxtOnTape=FALSE
UsePhysicalImageFiles=FALSE
;
; Selection of tape interface used:
;   0) Null device
;   1) Adaptec AHA-154XX SCSI board (direct)
;   2) ASPI DOS SCSI driver
TapeInterface=2
; IO address of Adaptec AHA-154XX board (for TapeInterface 1):
AdaptecIOAddress=230h
; ASPI host adapter number (0-2) to use (for TapeInterface 2):
AspiHostAdapterNumber=0;
; SCSI ID of tape unit (only valid in case of multiple units):
TapeTargetID=4
;
;
[cdrecording]
;
; Parameters for CD-Recording:
UsePhysicalImageFiles=TRUE
WriteEnable=TRUE
Speed=1
LinearVelocityLevel=2
NrOfWriters=1
Fixation=TRUE
MultiSession=TRUE
IncrementalWrite=FALSE
;
; Selection of CD-R interface used:
;   0) Null device
;   1) Adaptec AHA-154XX SCSI board (direct)
;   2) ASPI DOS SCSI driver
CDRInterface=2
; IO address of Adaptec AHA-154XX board (for CDRInterface 1):
AdaptecIOAddress=230h
; ASPI host adapter number (0-2) to use (for CDRInterface 2):
AspiHostAdapterNumber=0
; SCSI ID of CD-R unit (only valid in case of multiple units):
CDRTargetID=4
;
;
[harddisk]
;
; Selection of disk interface used (for raw SCSI hard disks):
;   0) Null device
;   1) Adaptec AHA-154XX SCSI board (direct)
;   2) ASPI DOS SCSI driver
DiskInterface=2
; IO address of Adaptec AHA-154XX board (for DiskInterface 1):
AdaptecIOAddress=230h
; ASPI host adapter number (0-2) to use (for DiskInterface 2):
AspiHostAdapterNumber=0
; SCSI ID of disk device (only valid in case of multiple units):
DiskTargetID=3
;
;
;end of GEAR.INI
