L-DEVICES

NAME

DESCRIPTION

A line in L-devices has the form:

Caller Device Call_Unit Class Dialer [Expect Send]....

Each item can be separated by any number of blanks or tabs. Lines beginning with a `#' character are comments; long lines can be continued by appending a `\' character to the end of the line.

Caller denotes the type of connection, and must be one of the following:

ACU

Automatic call unit, e.g., autodialing modems such as the Hayes Smartmodem 1200 or Novation ``Smart Cat''.

DIR

Direct connect; hardwired line (usually RS-232) to a remote system.

DK

AT&T Datakit.

MICOM

Micom Terminal switch.

PAD

X.25 PAD connection.

PCP

GTE Telenet PC Pursuit.

SYTEK

Sytek high-speed dedicated modem port connection.

TCP

Berkeley TCP/IP or 3Com UNET connection. These are mutually exclusive. Note that listing TCP connections in L-devices is superfluous; uucico does not even bother to look here since it has all the information it needs in L.sys(5).

Device is a device file in /dev/ that is opened to use the device. The device file must be owned by UUCP, with access modes of 0600 or better. (See chmod(2)).

Call_Unit is an optional second device file name. True automatic call units use a separate device file for data and for dialing; the Device field specifies the data port, while the Call_unit field specifies the dialing port. If the Call_unit field is unused, it must not be left empty. Insert a dummy entry as a placeholder, such as ``0'' or ``unused.''

Class is an integer number that specifies the line baud (for dialers and direct lines) or the port number (for network connections).

The Class may be preceded by a non-numeric prefix. This is to differentiate among devices that have identical Caller and baud, but are distinctly different. For example, ``1200'' could refer to all Bell 212-compatible modems, ``V1200'' to Racal-Vadic modems, and ``C1200'' to CCITT modems, all at 1200 baud. Similarly, ``W1200'' could denote long distance lines, while ``L1200'' could refer to local phone lines.

Dialer applies only to ACU devices. This is the "brand" or type of the ACU or modem.

DF02

DEC DF02 or DF03 modems.

DF112

Dec DF112 modems. Use a Dialer field of DF112T to use tone dialing, or DF112P for pulse dialing.

att

AT&T 2224 2400 baud modem.

cds224

Concord Data Systems 224 2400 baud modem.

dn11

DEC DN11 Unibus dialer.

hayes

Hayes Smartmodem 1200 and compatible autodialing modems. Use a Dialer field of hayestone to use tone dialing, or hayespulse for pulse dialing. It is also permissible to include the letters `T' and `P' in the phone number (in L.sys) to change to tone or pulse midway through dialing. (Note that a leading `T' or `P' will be interpreted as a dialcode!)

hayes2400

Hayes Smartmodem 2400 and compatible modems. Use a Dialer field of hayes2400tone to use tone dialing, or hayes2400pulse for pulse dialing.

novation

Novation ``Smart Cat'' autodialing modem.

penril

Penril Corp ``Hayes compatible'' modems (they really aren't or they would use the hayes entry.)

rvmacs

Racal-Vadic 820 dialer with 831 adapter in a MACS configuration.

va212

Racal-Vadic 212 autodialing modem.

va811s

Racal-Vadic 811s dialer with 831 adapter.

va820

Racal-Vadic 820 dialer with 831 adapter.

vadic

Racal-Vadic 3450 and 3451 series autodialing modems.

ventel

Ventel 212+ autodialing modem.

vmacs

Racal-Vadic 811 dialer with 831 adapter in a MACS configuration.

Expect/Send is an optional Expect/Send script for getting through a smart port selector, or for issuing special commands to the modem. The syntax is identical to that of the Expect/Send script of L.sys. The difference is that the L-devices script is used before the connection is made, while the L.sys script is used after.  

FILES

SEE ALSO

Index

NAME

DESCRIPTION

FILES

SEE ALSO