1	mill.
2	colors
3	-E.Hlp
4	\n\nDo you want more help?
5	Off
6	Max Screen
7	Move Dialogs
8	Max.Scrn. + Mov.Dlg.
9	Adaption of the graphics board to the monitor and adjusting the video parameters.
10	Display: ELSA Settings
51	&Database
100	Hardware Limits
101	If you have stored a graphics mode earlier, you may switch back to it.
102	Your monitor must be entered. Please click on 'Change...' and check the entered values.\nMost important is the maximal horizontal scan frequency (in kHz) of your monitor.
103	Select your wanted color depth.\nUsually 256 colors are good enough, for videos or 3-D applications 32678 or 65536 colors offer better performance and for sphisticated image processing 16.7 million colors may make sense.
104	Select your wanted refresh rate, e.g. 75 Hz.\nIf you are not sure about the capabilities of your monitor, select 75 Hz. Usually 85 Hz are very good.\nA more acurate adjustment you may do after clicking on the 'Details...' button.
105	This slider adjusts the visible screen resolution. The resolution indicates the number of pixels that can be displayed horizontally and vertically. It should fit to the screen size. It should be 1024 x 768 for 17'' monitors (43 cm CRT diagonal) , less for smaller monitors and more for larger monitors.
106	This slider adjusts the virtual screen resolution (Panning).
258	The editing of the details of the monitor timing should be done only by an expert. Do you want to continue ?
261	The graphics mode is stored and will become active at the next start of Windows.\n\nPlease close all DOS boxes and DOS applications.\nMay Windows be restarted right now?
267	The setting will be changed now.\nThis may take some seconds and may produce a disturbed screen.\nWhen after 15 seconds there is no Windows screen, the original settings will be restored.
268	The monitor order will be changed from '%1' to '%2'.\nAt the same time no other parameters are modified.\n\nThe monitor order will be changed now?
269	An old version of the ELSA WINman is on your computer in the directory '%1'.\nDelete this version?
270	For small screen resolutions the font size must be switched to 'Small Fonts'.\nChange to the dialog page 'Display Properties'/'Settings'.\n\nDo you want store the new settings without modifying the font size?
271	You have selected a color depth of 65536 colors (16 bpp). In this mode some programms (especially 3-D programms) will work with restrictions or with less performance. No Direct3D hardware acceleration would be available.\nUsually the prefered color depth is 32768 colors (15 bpp).\n\nDo you want select 32768 colors (recommended)?
272	The property page "ELSA Settings (WINman)" is not activ.\nThere may be a conflict, when the standard "Settings" page was activ.\nDo you want retain the Settings of the "ELSA Settings (WINman)" page and ignore the standard "Settings" page?
278	Please first select a monitor.
279	Please first select a timing.
280	VDIF file successfully stored.
281	Your monitor has changed.\nPlease confirm the shown data or enter new data.
288	The original monitor settings are restored.
289	Test (still %d seconds)
291	You have running another application, which uses DirectDraw.\nIt would be better to terminate this application.\nOtherwise you may get screen disturbances as long as the computer is not restarted.
300	Your monitor is compatible with VESA DDC. But the data found may be not the optimum.\nPlease correct especially the monitor name and the maximum kHz and Hz values.
301	The shown data of your monitor were found. But these data may be not the optimum.\nPlease correct especially the monitor size and the maximum kHz and Hz values.
515	This graphics board has only fix predefined graphics modes!
522	Error: The monitor database cannot be opened!
526	Error: There is already a file with this name. Enter a new name for the VDIF file!
527	Error: The VDIF file cannot be stored!
528	Error: The selected file cannot be opened or is no valid VESA VDIF monitor description file!
529	Error: The first value of the range must be lower than the second value!
533	Error: Windows cannot be restarted!\n\nAbort = back to previous settings\nRetry = another try\nIgnore = no restart of Windows, changed settings will be realized at next Windows restart
534	For switching from MULTIman (more than one screen) to single screen, you have to install the single screen ELSA Windows driver!\n(Under Control Panel/Display/Settings/Change Configuration...)
535	This setting can be done only after you have entered the maximal allowed horizontal scan rate of your monitors (in kHz) (otherwise your monitor may be damaged).\nPlease use the 'Change...' button under 'Monitor'.
536	Error: Cannot switch graphics mode!\nPlease open the Properties of Display and switch to ELSA Settings.
537	Error: ELSA Settings cannot switch to this graphics mode!\n
538	Error: ELSA Settings cannot switch to this graphics mode, because it is not possible to write to the registry!\nMay be your user account has too less rights for this area in the registry. Your administrator can give you these rights. The procedere is described either in the README.TXT of the ELSA Windows driver or in the help to ELSA Settings.\nDo you want see the help?
539	The maximal allowed horizontal scan rate (in kHz) of the monitor number %1 is not entered.\nDo you want take the data of the first monitor also for this monitor?
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61457	&Hide
61472	No error message is available.
61473	An unsupported operation was attempted.
61474	A required resource was unavailable.
61475	Out of memory.
61476	An unknown error has occurred.
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61720	Please enter a date and/or time.
61721	Please enter a currency.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61856	No error occurred.
61857	An unknown error occurred while accessing %1.
61858	%1 was not found.
61859	%1 contains an invalid path.
61860	%1 could not be opened because there are too many open files.
61861	Access to %1 was denied.
61862	An invalid file handle was associated with %1.
61863	%1 could not be removed because it is the current directory.
61864	%1 could not be created because the directory is full.
61865	Seek failed on %1
61866	A hardware I/O error was reported while accessing %1.
61867	A sharing violation occurred while accessing %1.
61868	A locking violation occurred while accessing %1.
61869	Disk full while accessing %1.
61870	An attempt was made to access %1 past its end.
61872	No error occurred.
61873	An unknown error occurred while accessing %1.
61874	An attempt was made to write to the reading %1.
61875	An attempt was made to access %1 past its end.
61876	An attempt was made to read from the writing %1.
61877	%1 has a bad format.
61878	%1 contained an unexpected object.
61879	%1 contains an incorrect schema.
61888	pixels