===GETTING STARTED======================================================

  This section covers everything you need to know to set up and start 3-D
  Dinosaur Adventure on your computer.
  
  What do I need?
  
  To run 3-D Dinosaur Adventure, you will need the following:
  
  - An IBM(r) or compatible computer.  A 386 processor is required, and
    a 486 processor is recommended.
  
  - A color VGA or SVGA monitor.
  
  - A CD-ROM drive that supports ISO 9660.
  
  - A hard disk with at least 5.6 megabytes of available disk space. 
    (If the disk is compressed with Stacker or DoubleSpace, at least
     11.2 megabytes must be free.)
  
  - Approximately 520 kilobytes of available RAM.
  
  - A mouse (recommended); the software can also be run using the
    keyboard alone.
  
  - A Creative Labs SoundBlaster 16.  3-D Dinosaur Adventure also supports 
    the optional WaveBlaster.

  - A printer (optional) so that you can print 3-D Dinosaur Adventure text
    files; any printer that can accept ASCII text directly from your
    computer port will work.
  
  - The original 3-D Dinosaur Adventure compact disk.
  
  How do I install the program?
  
  Follow these steps to install 3-D Dinosaur Adventure on your system:
  
  1.  Insert the 3-D Dinosaur Adventure compact disk into your CD-ROM drive
     and switch to that drive.  For example, if your CD-ROM drive is F,
     type:
  
       F: and press <Enter>
  
  2.  Type:
  
       INSTALL and press <Enter>
  
  3.  Follow the messages on the screen until the installation is complete.
  
  The Install program will ask you where on your hard drive you'd like to
  store the appropriate 3-D Dinosaur Adventure files, what sound device
  you have, and whether or not you'd like to run under Microsoft
  Windows(r).  If necessary, your CONFIG.SYS file will be altered so that
  FILES=20 or greater and your original CONFIG.SYS file will be saved to
  CONFIG.BKA.  You will also be asked to decide how much disk space 3-D
  Dinosaur Adventure will take up on your hard drive.  The more 3-D
  Dinosaur Adventure files you store on your hard drive, the faster the
  program will run.
  
  NOTE: If you have difficulty installing 3-D Dinosaur Adventure, turn to
  "About installation."
  
  Running under Windows
  
  If you answered YES to the question about running under Microsoft
  Windows(r) when you installed 3-D Dinosaur Adventure, a new program
  group called Knowledge Adventure has been created for your system.  It
  contains 3-D Dinosaur Adventure, Read Me, and 3-D Dinosaur Adventure
  Config icons.  Double-click on the 3-D Dinosaur Adventure icon to start
  the program.  Double-click on the Read Me icon to see the latest
  information about 3-D Dinosaur Adventure.  Double-click on the 3-D
  Dinosaur Adventure Config icon to edit the configuration file.  See
  "About program defaults" for more information about the 3-D Dinosaur
  Adventure configuration.
  
  NOTE: You'll find that the following statement has been added to the
  [386ENH] section of your SYSTEM.INI file:
  
       DMABUFFERSIZE=150
  
  Your original SYSTEM.INI and WIN.INI files are saved to the files 
  SYSTEM.BKA and WIN.BKA.
  
  How do I begin?
  
  To start 3-D Dinosaur Adventure, follow these steps:
  
  1.  Change to the directory on your hard drive containing the 3-D Dinosaur
     Adventure files.  For example, to switch to the C:\DINO3D directory,
     type:
  
       C: and press <Enter>
       CD\DINO3D and press <Enter>
  
  2.  Then, to start the program, type:
  
       DINO3D and press <Enter>
  
  NOTE: If you have difficulty starting 3-D Dinosaur Adventure, turn to
  "About startup."