1	GoBack
2	GoBack Setup
3	The file '%s' was not found on the install disk.\nAborting installation.
4	The destination disk is write-protected.\nPlease unprotect it and click 'Retry'.
5	The destination disk is full.\nPlease free up some space and click 'Retry'.
6	There was an error copying the file '%1!s!' to '%2!s!'.\nAborting installation.
7	The file '%s' did not verify correctly.\nAborting.
8	Out of memory.\nRestart Windows and try again.
9	Please insert your original GoBack %sCD\ninto your CD-ROM drive.
10	The currently installed copy of GoBack will be\nuninstalled in order to install this copy. Your\ncomputer will restart during this process.\n\nIs this OK? (Selecting 'Cancel' aborts the install)
11	Would you like to uninstall your copy of GoBack?\n\nYour computer will restart during this process.
13	A special GoBack Emergency Boot Disk is required\nin case of a problem during the upgrade. If the\nupgrade fails to complete or is interrupted by a\npower failure, you should insert this floppy into\nyour disk drive and reboot the computer.\n\nPlease insert a blank floppy disk into drive A:\n\nIMPORTANT: Any information on the disk will be erased.
14	Emergency Boot Disk
15	An error has occurred trying to verify\nEmergency Boot Disk.
16	Emergency Boot Disk was NOT created\nsuccessfully - setup is aborting.
17	Please eject the Emergency Boot Disk.
18	Updating files and registry entries.
19	Copying files and initializing registry entries.
20	Unable to shut down GoBack.\nRestart Windows and try again.\nIf problem persists, uninstall\nthe current version of GoBack\nthen install the new version.
21	Would you like to have a shortcut to GoBack placed on your desktop?
22	The GoBack program files must be installed\non a local hard drive.
23	One or more of your hard drives has very little\nfree space and will not be protected by GoBack.\n\nWould you like to perform a Custom install so\nyou can see and change the default settings?
24	You must leave at least %d MB of space free.
25	You must reserve at least %d MB of space for GoBack.
26	You may only reserve up to %d MB for GoBack.
27	For best results, you should reserve at least\n%d MB of space for GoBack.\n\nWould you like use the smaller amount anyway?
28	You must specify at least %d MB of space for\nGoBack on one of your physical disks.
29	Unable to communicate with the GoBack device driver.\nRestart Windows and try again.
30	Your first physical hard disk must have\nat least %d MB of free space!
31	Unable to find enough space on any hard disks!
32	 Professional
33	Would you like to reinstall GoBack\n%s?\n\nWARNING: All of your current GoBack history\nwill be lost. Also, your computer will\nrestart at the completion of the reinstall.
34	Would you like to upgrade your copy of GoBack\nfrom %1!s! to %2!s!%3!s!?\n\nWARNING: All of your current GoBack history\nwill be lost. Also, your computer will\nrestart at the completion of the upgrade.
35	Installation of GoBack is now complete.\n\nYour computer will now restart to enable GoBack.
36	Are you sure you want to enable GoBack?\n\nYour computer will restart during this process.
37	The currently installed version of GoBack contains\ninformation necessary to restore your computer to its\noriginal out-of-box condition.\n\nIf you uninstall GoBack, this information will be lost\nand your warranty will be voided.\n\nAre you sure you want to uninstall GoBack?\n
38	You cannot uninstall GoBack while the\nAuto-Revert feature is enabled.\n\nYou can disable Auto-Revert from the Boot Menu or in\nthe Options dialog accessible from the GoBack Main Menu.
39	This GoBack application appears to be corrupt.\n\nYou should uninstall and reinstall GoBack\nfrom the original CD-ROM.
40	GoBack Corruption Error
41	This beta version of GoBack has expired.\n\nYou can upgrade your copy of GoBack by contacting\nAdatpec at 1-800-442-7274 or visiting the GoBack\nweb site at http://www.goback.com/
42	GoBack Beta has Expired...
43	GoBack can only be installed on a computer\nrunning Windows 95 or Windows 98.
44	Unable to determine the version of Windows\nthat is installed.\n\nDo you want to attempt to install\nGoBack anyway?
45	GoBack can not be installed while\nWindows is in Safe Mode.\n
46	The GoBack device driver could not be opened.\n\nEnsure you are running SETUP.EXE from the folder\ncontaining VGOBACKD.VXD.
47	GoBack installation cannot complete until\nyou restart the computer.
48	GoBack has not installed completely.\nDo you want to cancel the installation?\n\nIf you select 'Yes', GoBack will restart the computer to\nremove the portions which have already been installed.\n\nIf you select 'No', GoBack will attempt to install again the\nnext time you restart the computer.
49	GoBack uninstall completed successfully.
50	GoBack was not completely uninstalled.\n\nGoBack functionality won't be completely restored\nuntil the next time you restart the computer.
51	GoBack can not be uninstalled while\nWindows is in Safe Mode.\n
52	You cannot upgrade or reinstall a PREVIEW copy of GoBack,\nyou must uninstall the current version first.\n\nYou can remove the current version by selecting\n"Add/Remove Programs" in the Windows Control Panel.
53	You cannot upgrade or reinstall GoBack while the\nAuto-Revert feature is enabled.\n\nYou can disable Auto-Revert from the Boot Menu or in\nthe Options dialog accessible from the GoBack Main Menu.
54	Unable to determine current version of GoBack.\n\nYou can remove the current version by selecting\n"Add/Remove Programs" in the Windows Control Panel.
55	The currently installed version of GoBack contains\ninformation necessary to restore your computer to its\noriginal out-of-box condition.\n\nIf you upgrade GoBack, this information will be lost\nand your warranty will be voided.\n\nAre you sure you want to upgrade GoBack?\n
56	The version of GoBack on your computer was\nprovided by %s.\n\nYou must get your GoBack updates from them.
57	You are attemping to install an older version\nof GoBack over the current version.\n\nYou can remove the current version by selecting\n"Add/Remove Programs" in the Windows Control Panel.
58	Before installing GoBack, you should read the\nREADME file which contains important information\nthat is not included in the User's Guide.\n\nIf you choose not to read it now, you will be\nable to find the file %s in the GoBack\ninstallation folder after installation.\n\nWould you like to view the README file now?
59	README
60	README.TXT
61	The current copy of GoBack is not properly installed.\nYou should either uninstall it or reinstall GoBack\nto try to correct the problem.
62	GoBack has Expired
63	This %s version of GoBack has expired and\nwill now be UNINSTALLED.\n\nDuring this process, your computer will restart.\n\nIf you would like to purchase a copy of GoBack,\nplease visit your local software retailer or\ncontact Adaptec at 1-800-442-7274.
64	This preview version of GoBack has expired and\nwill uninstall itself on %s.\n\nIf you would like to purchase a copy of GoBack,\nplease visit your local software retailer or\ncontact Adaptec at 1-800-442-7274.
65	An error occurred trying to run Setup.exe.
66	GoBack Preview has Expired
67	The GoBack ADMINISTRATOR password is required for this task.
68	The GoBack USER (or ADMINISTRATOR) password is required for this task.
69	The GoBack password you typed is incorrect.
70	License.txt
71	GoBack Setup Wizard - Welcome
72	GoBack Setup Wizard - Registration
73	GoBack Setup Wizard - Installation Type
74	GoBack Setup Wizard - GoBack Space Allocation
75	GoBack Setup Wizard - Summary
76	GoBack Setup Wizard
77	Drive %s
78	Drives %s
79	and 
80	, 
81	Adaptec
82	Copying install files to work directory.
83	Removing files and registry entries.
84	Creating Emergency Boot Disk.
85	Verifying Emergency Boot Disk.
86	Please select the folder to copy files to:
87	Drive
88	Capacity
89	Free Space
90	(none)
91	%1!s! (%2!c!:)
92	GoBack installation completed successfully.
93	%3.3f GB
94	%d,%03.3d MB
95	%d MB
96	Are you sure you want to disable GoBack?\n\nYour computer will restart during this process.
97	You have already selected a command for\nGoBack to perform on the next restart.
98	Unable to communicate with GoBack device driver!
99	Enabling GoBack.
100	» NONE «
101	Drives
102	GoBack Space
103	Key
104	= Protected by GoBack
105	= Less space than recommended
106	= Not protected by GoBack
107	 (on %C:)
108	Updating GoBack Driver.
109	Hooking GoBack into the MBR/BPB.
111	Unable to access GBSETHLP.VXD.\n\nEnsure you are running SETUP.EXE from the folder\ncontaining GBSETHLP.VXD.
112	Can't open the drive for exclusive access.\nAnother program has exclusive access to it.\nQuit other programs first.
113	Can't create GOBACKIO.BIN - this file is used for GoBack history.
114	The sector size on drive is not 512 bytes.\nGoBack may only be installed on drives with 512 byte sectors.
115	Cluster size is greater than 4K bytes.\nDrive must be formatted with 4K or smaller clusters.
116	Are you sure you want to cancel setup?
117	An error was detected on the drive.\nRun ScanDisk in thorough mode first.
118	An error was detected in the file system.\nRun ScanDisk first.
119	Drive contents changed: Restarting.
120	Excessive disk activity prevents install.
121	Unable to find enough movable space for a GoBack History Buffer of %d MB.\nClose all other programs including those in the system tray.
122	Unable to find enough movable space for a GoBack History Buffer of the requested size.\nCreate a GoBack History Buffer of %d MB?
123	Not enough free space for a GoBack History Buffer of requested size.\nCreate a GoBack History Buffer of %d MB?
124	You are about to enable GoBack.\n\nIf you continue, GoBack will replace System Restore\nas your default restore program.
125	You are about to install GoBack.\n\nIf you continue, GoBack will replace System Restore\nas your default restore program.
126	Examining drive.
129	Packing %.80s.
130	Scanning %.80s.
131	Creating %.80s.
133	Relocating %.80s.
134	Windows has configured Drive C: for MS-DOS Compatibility mode.\nThis is preventing GoBack from installing.\n\nFor more information, see the GoBack User's Guide.
135	Windows has configured %s for\nMS-DOS Compatibility mode. You will not be able to\ninstall GoBack on those drives.\n\nFor more information, see the GoBack User's Guide.
136	Windows has configured Drive C: for MS-DOS Compatibility mode.\nThis is preventing GoBack from uninstalling.\n\nDisable GoBack from the GoBack Boot Menu\nthen try uninstalling again.
137	1033
138	One of the partitions that GoBack was originally\ninstalled on no longer exists. You need to uninstall\nand reinstall GoBack for it to recognize the new\ndrive layout.
139	The installation folder you have specified is not valid.\n\nTry using the 'Browse' button to help\nyou find the correct folder.
140	The GoBack CD in the drive was provided by a different\ncompany than the one being installed.\n\nPlease insert the correct CD.
141	The GoBack CD in the drive is not for\nGoBack PROFESSIONAL.\n\nPlease insert your GoBack PROFESSIONAL CD.
142	The GoBack CD in the drive appears to be damaged\nor may not be an original GoBack CD.\n\nPlease insert your original GoBack CD.
143	The GoBack CD in the drive contains a PREVIEW\ncopy of GoBack CD.\n\nPlease insert your original NON-PREVIEW GoBack CD.
144	GoBack is unable to determine which of your\nhard drives is the boot drive.\n\nGoBack cannot be installed until this problem\nis corrected.
145	GoBack can not be upgraded while\nWindows is in Safe Mode.\n
200	The boot partition on disk #%d is not supported by GoBack.\n\nGoBack cannot be installed on this computer.
201	The partition table on disk #%d indicates that\nthere are overlapping partitions.\n\nGoBack cannot be installed until this problem\nis corrected.
202	The partition table on disk #%d is not valid.\n\nGoBack cannot be installed until this problem is corrected.
203	Hard disk #%d has multiple extended partitions.\nThis in not a valid configuration for Windows.\n\nGoBack cannot be installed on this computer.
204	Hard disk #%d already has a partition using\nthe same signature as GoBack.\n\nGoBack cannot be installed on this computer.
205	The parameters for hard disk #%d\nare inconsistent.\n\nGoBack cannot be installed until\nthis problem is corrected.
220	GoBack has detected an NTFS partition on disk #%d.\n\nThis version of GoBack does not support Windows NT\nor Windows 2000. GoBack will still install on this\ndisk, but you will not be able to use Windows NT\nor Windows 2000 while GoBack is enabled.
221	GoBack has detected unsupported partitions on disk #%d.\n\nThese partitions will probably not be accessible while\nGoBack is enabled.
222	GoBack has detected unsupported partitions on disk #%d.\n\nThis prevents GoBack from protecting all of the partitions\non this drive. Be sure to verify that GoBack is protecting\nthe desired partitions.
2001	Writing history data headers.
2002	Scanning for bad data headers.
2003	Scanning for bad sectors.
2004	Scanning for bad sectors.
2005	Copying GoBack driver to Drive %c:.
2007	Creating GoBack data file on Drive %c:.
2008	Initializing GoBack structures on Drive %c:.
2009	Mounting GoBack drives.
2100	An error occurred while attempting to write the\nMBR sector. If you have virus software enabled, you need\nto disable that software and try again.\n\nDo you want GoBack to try writing the MBR again?
2131	GoBack got a write error while attempting to\nwrite to BPB sector 0x%lx on disk #%d.\n\nCode %x
2133	It appears as though the GOBACKIO.BIN file\non disk #%d has been moved to a different\npartition on this disk or the geometry of\nthe disk has been changed. This file will\nbe deleted since it is no longer valid.
2306	GoBack could not create the file\nGOBACKIO.BIN on drive %c:. This could\nbe caused by bad sectors on that drive.
2308	GoBack is unable to locate the file\n'%s'.\nThis means that GoBack is either not\nassociating drive letters to physical\nhard drives properly or that the disk\ncontaining GB_PROG.EXE has been removed.
2309	The GB_PROG.EXE file is too big to fit within\nthe reserved area of the GOBACKIO.BIN file. This\nshould not be possible!!
2310	GoBack is unable to read the file\n'%s'.
2311	GoBack encountered errors while trying to\nwrite the driver to %c:GOBACKIO.BIN.\n\nCode %x
2322	While setting up GOBACKIO.BIN on drive %c:, GoBack found\nsome bad sectors within critical areas in its data file.\n\nPlease run ScanDisk in thorough mode to map out the errors.
2324	Critical failure re-reading the MBR on disk #%d.\n\ncode %x
2325	Critical failure reading BPB sector %lx\non disk #%d.\n\ncode %x
2326	Strange... BPB sector %lx on disk #%d unexpectedly has\na GoBack signature. Before GoBack can install on this\ndisk, you need to restore the BPB. You may be able to\ndo this by running SYS on this disk.
2327	Error writing GoBack's backup copy\nof the MBR on disk #%d.
2328	Error writing GoBack's backup copy\nof the BPB on disk #%d.
2329	Error writing GoBack's header\nsector on disk #%d.
2330	Disk #%d has an invalid partition table\nat sector %lx. Only one type 0x05 or 0x0f\nsignature allowed per table.
2331	Disk #%d has a bad partition table\nat sector %lx.
2332	GoBack's header on disk #%d has become corrupt!
2333	Your hard disk #%d currently contains a type 0x44\npartition on it. This partition type is used by\nGoBack, but GoBack dosn't recognize this partition\nas being its own. To install GoBack, you must first\nremove this partition from your hard disk.
2334	You have one or more partitions on disk #%d that\nGoBack doesn't recognize. These partitions are\npreventing GoBack from being able to install on\nthis disk.
2335	Strange... When rescanning the partition table\non disk #%d, GoBack couldn't locate the partition\ncontaining logical drive %c: