1	Drive Type:
2	Disk in drive %c: is %s
3	not protected.
4	write-protected.
5	write-protected with password.
6	read/write-protected.
7	&Change Password.
8	&Change or Remove Password.
9	Unprotect Disk in Drive %c:
10	&Remove protection
12	Write Protect Disk in Drive %c:
13	Change Password for Disk in Drive %c:
14	Password for Disk in Drive %c:
16	Enter the Current Password:
17	Enter New Password:
18	Enter Old Password:
19	Retype New Password:
20	You have entered an INVALID password!
21	Serial Number:
22	Auto Sleep Time:
23	ROM Version:
24	ROM Date:
25	SCSI ID:
26	Logical Unit Number:
27	Disk Type:
28	Total Bytes:
29	Bytes Available:
30	Format Type:
31	Volume Label:
32	Field Formatted:
33	Julian Date:
34	Disk Life Status:
35	Format Status:
36	Protect Status:
37	Adapter Type:
38	Interrupt Vector:
39	Memory Address:
40	I/O Port Address:
41	Buffer Address:
42	Processor:
43	Windows Version:
44	Available Memory:
45	Windows Mode:
46	Write-protected
47	Read/Write-protected
48	Unprotected until eject
49	Protect Caution for Disk in Drive %c:
50	DOS Version:
51	Unprotected
52	Present Disk Status
53	Change Disk Status
54	&Unprotect until Eject ...
55	Re&move Protection ...
56	&Write Protect ...
57	&Read/Write Protect ...
58	Change &Password ...
59	Write Protect with &Password ...
60	&Write Protect
61	Disk Protect Options
62	Enter New Password (optional) :
65	Interface Type:
67	Parallel Port
68	SCSI
1000	Iomega Tools NT
1001	Version 6.1
1003	&OK
1004	&Cancel
1005	&Help
1006	Drive sleep in
1007	minutes.
1008	Testing drive ... please wait.
1009	Short Format:
1010	Long Format with Surface Verify:
1011	Make disk bootable (copy system files)
1012	Volume Label:
1013	Estimated time: %s
1015	6.1, Copyright © 1998 Iomega Corporation, English Version
1016	This computer program is protected by copyright law and international treaties.  
1017	Drive Sleep for Drive %c:
1018	Diagnostics for Drive %c:
1019	Format Disk in Drive %c:
1024	When you select OK, the disk in drive %c: will be nonremovable, and will look like a fixed disk to your system until you select "Make Removable" or reboot your system.
1025	When you select OK, the disk in drive %c: will be removable.
1026	Start
1027	Make disk nonremovable .
1028	Unprotect disk temporarily (until eject).
1029	Short Format Disk in Drive %c:
1030	Long Format Disk in Drive %c:
1032	minutes (to conserve energy).
1033	unprotected until eject.
1034	READ/WRITE-PROTECT CAUTION:  If you forget your password, the data on this disk can NEVER be recovered.  The disk can only be reformatted, erasing ALL data.
1035	WRITE-PROTECT CAUTION:  If you forget your password, you will need to copy this disk to another disk before you can change the data.
1038	Warning:  ALL data on the disk in drive %c: will be lost! 
1039	Formatting disk . . . 
1040	Windows Startup Preferences
1041	Untitled
1042	Drive %c: Diagnostics Passed
1043	Drive %c: Diagnostics failed.  If you are having problems with the drive, call your hardware dealer or see "Contacting Iomega" in Help.
1044	%d Minutes
1045	IRQ %d
1046	No IRQ used
1047	No memory mapping used
1048	No port assigned
1049	No buffer used
1050	Enhanced Mode
1051	Standard Mode
1052	N/A
1053	OK
1055	Long Format Recommended
1056	Drive %c: Diagnostics not completed.
1057	Drive %c: first test not successful.  Insert another disk to continue the test.
1058	Format complete.
1059	Disk in drive %c: is write-protected.  Correct and retry command.
1061	Format can still be performed on the disk in drive %c:.  All data will be ERASED.  Press Start to continue the format.
1062	Format failed.  Disk in drive %c: is unusable.  Try running Long format on disk.
1063	Only a long format can be performed on the disk if you have forgotten your password.  Select OK to return to the format-selection screen.
1064	Unable to format %s disks in drive %c:
1065	Format failed.  Disk in drive %c: is unusable.
1066	Unable to set protect state.
1067	Not enough memory to issue command.
1068	This format will take approximately %d %s.
1069	Unable to copy system files.
1070	This format may take up to %d %s.
1071	minute(s)
1072	seconds
1073	hour(s)
1074	Windows Exit cancelled because of format in progress.
1075	Completed
1076	byte sectors
1077	Yes
1078	No
1079	No disk present
1080	Unknown
1081	bit FAT
1082	Unable to format the media type in drive %c:!
1083	Continue format ?
1084	Compressed
1086	Disk in drive %c: is a mounted Stacker volume.  To access the disk through Iomega Tools, first unmount the disk.
1087	Unauthorized reproduction or distribution of this program, or any portion of it, will be prosecuted.
1088	Because WINDOWS is running from the disk in drive %c:, Iomega Tools will NOT format the disk.
1089	Do you really want to format your BOOT disk in drive %c:?
1090	Insert disk into drive %c: to continue.
1091	Drive sleep time must be between %d and %d minutes.
1092	Removable Status:
1093	Driver:
1094	Miniport Driver:
1095	Diagnostics will check to see if your drive is functioning correctly.
1096	Diagnose Now...
1097	Diagnostics Information
1098	Diagnostics Status
1099	Disk in drive %c: is now %s
1100	Iomega Zip Watch
1101	  To temporarily unprotect this disk, enter password:
1102	&Eject
1103	Check for read/write protected disks?
1104	Check every
1105	seconds.
1106	Removable
1107	Nonremovable
1108	Marginal
1109	Macintosh Format
1110	%s bytes total disk space.
1111	%s bytes used by system files.
1112	%s bytes in bad sectors.
1113	%s bytes available on disk.
1114	Format successful.
1115	Format failed.
1116	Check interval must be between %d and %d.
1117	Disk/Drive Status
1118	Drive
1119	Disk
1120	Startup
1121	Diagnostics
1122	&Close
1123	Format Type
1124	Iomega Tools cannot format drive %c: while it is in use.  Quit any disk utilities or other programs that are using this drive, and make sure that no window is displaying the contents of the drive.
1125	Format currently in use.
1126	Verify writes (for extra data protection)
1127	Leaving "Verify writes" checked maintains a greater assurance that your data is written correctly.
1128	&Leave Checked
1129	IDE/ATAPI
1130	Verify Writes
1131	Password entry is CASE-sensitive.  The way you enter the password (upper or lower case) is the way it must be entered each time.
1132	I Forgot
1133	Enter only standard characters for the password.  Extended characters will not be accepted.
1134	Don't show this message again.
1135	NTFS or other IFS
1136	seconds ( to conserve energy) .
1137	%d Seconds