1	This operation resets the internal counter for your printer's Process Unit.\nClick OK only if you are installing a new Process Unit.
2	Status Display
3	There is not enough system resource.\nClose some application, and press Retry button.
4	Ready for printing.
5	Power Off or Cable Error.
6	Check the printer is powered on, and the interface cable is connected correctly.
7	Not installed correctly.
8	Some files for this application are missing.  Install this application again.
9	Waiting for a response from the printer...
10	&About...
11	Processing...
12	If you install new Process Unit, press PRINT/STATUS key on the printer for 20 seconds to reset Process Unit counter in the printer.
13	The KX-P6600 is not detected.
14	Confirm that the KX-P6600 is connected on selected port correctly.
15	The KX-P6600 is not detected.  Confirm that the KX-P6600 is connected on selected port correctly.
16	Status Display - Recovery
17	WARNING!
18	 is found on the selected port.\n\nIf you connect the printer other than KX-P6600, clear the "Display an error status occurs in the printer" on the Alert panel of the printer driver for KX-P6600.
19	Printers Folder
20	 - Status Display
21	 - Recovery