Manußl PHP
P°edchßzejφcφDal╣φ


LIV. Mcrypt Encryption Functions

This is an interface to the mcrypt library, which supports a wide variety of block algorithms such as DES, TripleDES, Blowfish (default), 3-WAY, SAFER-SK64, SAFER-SK128, TWOFISH, TEA, RC2 and GOST in CBC, OFB, CFB and ECB cipher modes. Additionally, it supports RC6 and IDEA which are considered "non-free".

Mcrypt can be used to encrypt and decrypt using the above mentioned ciphers. If you linked against libmcrypt-2.2.x, the four important mcrypt commands (mcrypt_cfb(), mcrypt_cbc(), mcrypt_ecb(), and mcrypt_ofb()) can operate in both modes which are named MCRYPT_ENCRYPT and MCRYPT_DECRYPT, respectively.

P°φklad 1. Encrypt an input value with TripleDES under 2.2.x in ECB mode

<?php
$key = "this is a very secret key";
$input = "Let us meet at 9 o'clock at the secret place.";

$encrypted_data = mcrypt_ecb (MCRYPT_3DES, $key, $input, MCRYPT_ENCRYPT);
?>
This example will give you the encrypted data as a string in $encrypted_data.

If you linked against libmcrypt 2.4.x, these functions are still available, but it is recommended that you use the advanced functions.

P°φklad 2. Encrypt an input value with TripleDES under 2.4.x in ECB mode

<?php
$key = "this is a very secret key";
$input = "Let us meet at 9 o'clock at the secret place.";

$td = mcrypt_module_open (MCRYPT_TripleDES, "", MCRYPT_MODE_ECB, "");
$iv = mcrypt_create_iv (mcrypt_enc_get_iv_size ($td), MCRYPT_RAND);
mcrypt_generic_init ($td, $key, $iv);
$encrypted_data = mcrypt_generic ($td, $input);
mcrypt_generic_end ($td);
?>
This example will give you the encrypted data as a string in $encrypted_data.

Requirements

These functions work using mcrypt.

If you linked against libmcrypt 2.4.x, the following additional block algorithms are supported: CAST, LOKI97, RIJNDAEL, SAFERPLUS, SERPENT and the following stream ciphers: ENIGMA (crypt), PANAMA, RC4 and WAKE. With libmcrypt 2.4.x another cipher mode is also available; nOFB.

Installation

To use it, download libmcrypt-x.x.tar.gz from here and follow the included installation instructions. You need to compile PHP with the --with-mcrypt parameter to enable this extension. Make sure you compile libmcrypt with the option --disable-posix-threads.

Runtime Configuration

Resource types

Toto rez╣φ°enφ nemß definovßn ╛ßdn² typ prost°edku (resource).

Predefined constants

Mcrypt can operate in four block cipher modes (CBC, OFB, CFB, and ECB). If linked against libmcrypt-2.4.x mcrypt can also operate in the block cipher mode nOFB and in STREAM mode. Below you find a list with all supported encryption modes together with the constants that are defines for the encryption mode. For a more complete reference and discussion see Applied Cryptography by Schneier (ISBN 0-471-11709-9).

  • MCRYPT_MODE_ECB (electronic codebook) is suitable for random data, such as encrypting other keys. Since data there is short and random, the disadvantages of ECB have a favorable negative effect.

  • MCRYPT_MODE_CBC (cipher block chaining) is especially suitable for encrypting files where the security is increased over ECB significantly.

  • MCRYPT_MODE_CFB (cipher feedback) is the best mode for encrypting byte streams where single bytes must be encrypted.

  • MCRYPT_MODE_OFB (output feedback, in 8bit) is comparable to CFB, but can be used in applications where error propagation cannot be tolerated. It's insecure (because it operates in 8bit mode) so it is not recommended to use it.

  • MCRYPT_MODE_NOFB (output feedback, in nbit) is comparable to OFB, but more secure because it operates on the block size of the algorithm.

  • MCRYPT_MODE_STREAM is an extra mode to include some stream algorithms like WAKE or RC4.

Here is a list of ciphers which are currently supported by the mcrypt extension. For a complete list of supported ciphers, see the defines at the end of mcrypt.h. The general rule with the mcrypt-2.2.x API is that you can access the cipher from PHP with MCRYPT_ciphername. With the mcrypt-2.4.x API these constants also work, but it is possible to specify the name of the cipher as a string with a call to mcrypt_module_open().

  • MCRYPT_3DES

  • MCRYPT_ARCFOUR_IV (libmcrypt 2.4.x only)

  • MCRYPT_ARCFOUR (libmcrypt 2.4.x only)

  • MCRYPT_BLOWFISH

  • MCRYPT_CAST_128

  • MCRYPT_CAST_256

  • MCRYPT_CRYPT

  • MCRYPT_DES

  • MCRYPT_DES_COMPAT (libmcrypt 2.2.x only)

  • MCRYPT_ENIGMA (libmcrypt 2.4.x only, alias for MCRYPT_CRYPT)

  • MCRYPT_GOST

  • MCRYPT_IDEA (non-free)

  • MCRYPT_LOKI97 (libmcrypt 2.4.x only)

  • MCRYPT_MARS (libmcrypt 2.4.x only, non-free)

  • MCRYPT_PANAMA (libmcrypt 2.4.x only)

  • MCRYPT_RIJNDAEL_128 (libmcrypt 2.4.x only)

  • MCRYPT_RIJNDAEL_192 (libmcrypt 2.4.x only)

  • MCRYPT_RIJNDAEL_256 (libmcrypt 2.4.x only)

  • MCRYPT_RC2

  • MCRYPT_RC4 (libmcrypt 2.2.x only)

  • MCRYPT_RC6 (libmcrypt 2.4.x only)

  • MCRYPT_RC6_128 (libmcrypt 2.2.x only)

  • MCRYPT_RC6_192 (libmcrypt 2.2.x only)

  • MCRYPT_RC6_256 (libmcrypt 2.2.x only)

  • MCRYPT_SAFER64

  • MCRYPT_SAFER128

  • MCRYPT_SAFERPLUS (libmcrypt 2.4.x only)

  • MCRYPT_SERPENT(libmcrypt 2.4.x only)

  • MCRYPT_SERPENT_128 (libmcrypt 2.2.x only)

  • MCRYPT_SERPENT_192 (libmcrypt 2.2.x only)

  • MCRYPT_SERPENT_256 (libmcrypt 2.2.x only)

  • MCRYPT_SKIPJACK (libmcrypt 2.4.x only)

  • MCRYPT_TEAN (libmcrypt 2.2.x only)

  • MCRYPT_THREEWAY

  • MCRYPT_TRIPLEDES (libmcrypt 2.4.x only)

  • MCRYPT_TWOFISH (for older mcrypt 2.x versions, or mcrypt 2.4.x )

  • MCRYPT_TWOFISH128 (TWOFISHxxx are available in newer 2.x versions, but not in the 2.4.x versions)

  • MCRYPT_TWOFISH192

  • MCRYPT_TWOFISH256

  • MCRYPT_WAKE (libmcrypt 2.4.x only)

  • MCRYPT_XTEA (libmcrypt 2.4.x only)

You must (in CFB and OFB mode) or can (in CBC mode) supply an initialization vector (IV) to the respective cipher function. The IV must be unique and must be the same when decrypting/encrypting. With data which is stored encrypted, you can take the output of a function of the index under which the data is stored (e.g. the MD5 key of the filename). Alternatively, you can transmit the IV together with the encrypted data (see chapter 9.3 of Applied Cryptography by Schneier (ISBN 0-471-11709-9) for a discussion of this topic).

Obsah
mcrypt_get_cipher_name — Get the name of the specified cipher
mcrypt_get_block_size — Get the block size of the specified cipher
mcrypt_get_key_size — Get the key size of the specified cipher
mcrypt_create_iv — Create an initialization vector (IV) from a random source
mcrypt_cbc — Encrypt/decrypt data in CBC mode
mcrypt_cfb — Encrypt/decrypt data in CFB mode
mcrypt_ecb — Encrypt/decrypt data in ECB mode
mcrypt_ofb — Encrypt/decrypt data in OFB mode
mcrypt_list_algorithms — Get an array of all supported ciphers
mcrypt_list_modes — Get an array of all supported modes
mcrypt_get_iv_size — Returns the size of the IV belonging to a specific cipher/mode combination
mcrypt_encrypt — Encrypts plaintext with given parameters
mcrypt_decrypt — Decrypts crypttext with given parameters
mcrypt_module_open — This function opens the module of the algorithm and the mode to be used
mcrypt_module_close — Free the descriptor td
mcrypt_generic_deinit — This function terminates encrypt specified by the descriptor td
mcrypt_generic_init — This function initializes all buffers needed for encryption
mcrypt_generic — This function encrypts data
mdecrypt_generic — This function decrypts data
mcrypt_generic_end — This function terminates encryption
mcrypt_enc_self_test — This function runs a self test on the opened module
mcrypt_enc_is_block_algorithm_mode — Checks whether the encryption of the opened mode works on blocks
mcrypt_enc_is_block_algorithm — Checks whether the algorithm of the opened mode is a block algorithm
mcrypt_enc_is_block_mode — Checks whether the opened mode outputs blocks
mcrypt_enc_get_block_size — Returns the blocksize of the opened algorithm
mcrypt_enc_get_key_size — Returns the maximum supported keysize of the opened mode
mcrypt_enc_get_supported_key_sizes — Returns an array with the supported keysizes of the opened algorithm
mcrypt_enc_get_iv_size — Returns the size of the IV of the opened algorithm
mcrypt_enc_get_algorithms_name — Returns the name of the opened algorithm
mcrypt_enc_get_modes_name — Returns the name of the opened mode
mcrypt_module_self_test — This function runs a self test on the specified module
mcrypt_module_is_block_algorithm_mode — This function returns if the the specified module is a block algorithm or not
mcrypt_module_is_block_algorithm — This function checks whether the specified algorithm is a block algorithm
mcrypt_module_is_block_mode — This function returns if the the specified mode outputs blocks or not
mcrypt_module_get_algo_block_size — Returns the blocksize of the specified algorithm
mcrypt_module_get_algo_key_size — Returns the maximum supported keysize of the opened mode
mcrypt_module_get_supported_key_sizes — Returns an array with the supported keysizes of the opened algorithm


P°edchßzejφcφDom∙Dal╣φ
mcal_week_of_yearNahorumcrypt_get_cipher_name