UDP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    mib-2, IpAddress, Counter32, OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI;

udpMIB MODULE-IDENTITY
    LAST-UPDATED "9411010000Z"
    ORGANIZATION "IETF SNMPv2 Working Group"
    CONTACT-INFO
                 "Keith McCloghrie

          Postal: Cisco Systems, Inc.
                  170 West Tasman Drive
                  San Jose, CA  95134-1706
                  US

          Phone:  +1 408 526 5260
          Email:  kzm@cisco.com"
    DESCRIPTION
        "The MIB module for managing UDP implementations."
    REVISION     "9103310000Z"
    DESCRIPTION
        "The initial revision of this MIB module was part of MIB-
         II."
    ::= { mib-2  50 }

udp OBJECT IDENTIFIER ::= { mib-2  7 }

udpInDatagrams OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of UDP datagrams delivered to UDP users."
    ::= { udp  1 }

udpNoPorts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of received UDP datagrams for which there
         was no application at the destination port."
    ::= { udp  2 }

udpInErrors OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of received UDP datagrams that could not be
         delivered for reasons other than the lack of an application
         at the destination port."
    ::= { udp  3 }

udpOutDatagrams OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of UDP datagrams sent from this entity."
    ::= { udp  4 }

udpTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF UdpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table containing UDP listener information."
    ::= { udp  5 }

udpEntry OBJECT-TYPE
    SYNTAX     UdpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Information about a particular current UDP listener."
    INDEX      { udpLocalAddress,  udpLocalPort }
    ::= { udpTable  1 }

UdpEntry ::=
    SEQUENCE {
        udpLocalAddress
            IpAddress,

        udpLocalPort
            INTEGER
    }

udpLocalAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The local IP address for this UDP listener.  In the case of
         a UDP listener which is willing to accept datagrams for any
         IP interface associated with the node, the value 0.0.0.0 is
         used."
    ::= { udpEntry  1 }

udpLocalPort OBJECT-TYPE
    SYNTAX     INTEGER
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The local port number for this UDP listener."
    ::= { udpEntry  2 }

udpMIBConformance ::= { udpMIB  2 }

udpMIBCompliances ::= { udpMIBConformance  1 }

udpMIBGroups ::= { udpMIBConformance  2 }

udpMIBCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
        "The compliance statement for SNMPv2 entities which
         implement UDP."

    MODULE           -- this module
    MANDATORY-GROUPS { udpGroup }
    ::= { udpMIBCompliances  1 }

udpGroup OBJECT-GROUP
    OBJECTS    {
                 udpInDatagrams,
                 udpNoPorts,
                 udpInErrors,
                 udpOutDatagrams,
                 udpLocalAddress,
                 udpLocalPort
               }
    STATUS     current
    DESCRIPTION
        "The udp group of objects providing for management of UDP
         entities."
    ::= { udpMIBGroups  1 }

END