Copyright: Thursday, October 07, 1999 10:40:40


Specifies whether to enable accounting. Selecting this option allows you to log accounting activities such as who is using network resources, the dates and times of the sessions, and session addressing information.


Specifies whether QoS Admission Control is enabled on this subnet.


Specifies whether RSVP message logging is enabled for this subnet.


Specifies whether a maximum rate that data can travel on this subnet is set.


Specifies whether a reservation duration allowed for each data flow is set.


Specifies whether a maximum data rate allowed for a burst of packets on this subnet is set.


Specifies whether a maximum allowable data rate sum for all simultaneous flows is set.


Specifies whether a maximum number of flows allowed on this subnet is set.


Specifies whether a maximum peak data rate sum for all simultaneous flows is set.


Provides a space for you to type or select the logging level you want to use for the System Event log. Select:

0 error conditions are always logged.

1 for severe messages only.

2 for warnings only.

3 for informational messages.


Provides a space for you to type a QoS Admission Control group profile name. A group profile is used to apply policies to a group of users with similar network requirements.


Provides a space for you to type a QoS Admission Control policy name. A policy profile is used to apply policies to users with similar network requirements.


Provides a space for you to type the location of the accounting log file. By default, the file is located in windir\system32.


Provides a space for you to type the maximum number of Accounting log files allowed. When the maximum number of log files is reached, the oldest log files are overwritten with new ones.


Provides a space for you to type the maximum Accounting log file size allowed in megabytes (MB). When the maximum log file size is reached, a new log file is created or an existing file overwritten, depending on the Number of files setting.


Provides a space for you to type, in seconds, how often the QoS Admission Control host signals its availability to the subnet to take bandwidth requests from clients.


Provides a space for you to type, in kilobytes per second, the maximum rate at which data is sent until the bandwidth reservation is complete. After the reservation is complete, the Traffic settings apply to all flows.


Provides a space for you to type, in seconds, the interval after which clients assume that no QoS Admission Control hosts are available on this subnet.


Provides a space for you to type the election priority you want to assign to this server. By default, election priorities are determined automatically and set at the same value. You can also click the scroll arrows to select a new setting.


Provides a space for you to type a description for this subnet. This description is used for display purposes only.


Provides a space for you to type the number of kilobytes per second to which you want to limit the data rate per flow.


Provides a space for you to type the number of kilobytes per second to which you want to limit the peak data rate per flow.


Provides a space for you to type the number of kilobytes per second to which you want to limit the aggregate data rate for all flows on this subnet.


Provides a space for you to type the number of kilobytes per second to which you want to limit the aggregate peak data rate for all flows on this subnet.


Provides a space for you to type the location of the RSVP log file. By default, the file is located in windir\system32\LogFiles.


Provides a space for you to type the maximum number of RSVP log files allowed. When the maximum number of log files is reached, the oldest log files are overwritten with new ones.


Provides a space for you to type the maximum RSVP log file size allowed in megabytes (MB). When the maximum log file size is reached, a new log file is created or an existing file overwritten, depending on the Number of log files setting.


Provides a space for you to type, in kilobytes, the maximum rate at which data can travel on this subnet.


Provides a space for you to type, in minutes, the time period that you want to allow reservations for each data flow.


Provides a space for you to type, in kilobytes, the maximum data rate allowed for a burst of packets on this subnet. This number must be greater than or equal to the number typed in Peak data rate per flow.


Provides a space for you to type, in minutes, how often the designated subnet bandwidth manager (DSBM) checks for new policy information in Active Directory.


Provides a space for you to type the maximum data rate in kilobits allowed for all simultaneous flows on this subnet.


Provides a space for you to type the maximum number of flows allowed on this subnet.


Provides a space for you to type, in kilobytes, the maximum peak data rate allowed for all simultaneous flows.


Provides a space for you to type the name of the external user for which you want to create a policy.


Provides a space for you to type the IP address of the QoS Admission Control subnet you want to create.


Specifies that the Data Rate settings from the default Any authenticated user policy are used.


Provides a space for you to type the maximum number of kilobits per second you want to allow for all simultaneous data flows.


Specifies that the data rate for simultaneous data flows is limited to a specified number of kilobits per second.


Specifies that the maximum data rate possible is allowed for all simultaneous data flows. The data rate is only limited by available network resources.


Specifies that the Number of flows settings from the default Any authenticated user policy is applied.


Provides a space for you to type the maximum number of simultaneous data flows you want to allow with this policy. For example, type 500 if you want to allow a maximum of 500 simultaneous data flows.


Specifies that a maximum number of simultaneous data flows is set for this policy.


Specifies that an unlimited number of simultaneous data flows is allowed.


Specifies that the Peak Data Rate settings from the default Any authenticated user policy are applied.


Provides a space for you to type the maximum kilobits per second you want to allow for the peak data rate. This value must be equal to, or greater than, the value entered in Data Rate.


Specifies that a maximum Peak Data Rate is specified for all simultaneous data flows.


Specifies that the maximum Peak Data Rate permitted by network resources is allowed for all simultaneous data flows.


Specifies that Data Rate settings from the default Any authenticated user policy be applied to each data flow.


Provides a space for you to type the maximum number of kilobits per second you want to allow for each individual data flow.


Specifies that the data rate for each data flow is limited to a specified number kilobits per second.


Specifies that the maximum possible data rate be allowed for each data flow. The data rate is only limited by available network resources.


Specifies that the flow Duration settings from the default Any authenticated user policy are applied to each data flow.


Provides a space for you to type the maximum number of minutes you want to allow each data flow to maintain its reservation.


Specifies that the maximum number of minutes to allow each data flow is required to maintain the reservation.


Specifies that flow reservation settings are enforced for the period of time requested by an application.


Specifies that Peak Data Rate settings from the default Any authenticated user policy are applied to each data flow.


Provides a space for you to type the maximum number of kilobits per second you want to allow for each data flow.


Specifies that the peak data rate for each data flow is limited to a specified number kilobits per second.


Specifies that the maximum peak data rate permitted by network resources is allowed for each individual data flow.


Click to view a list of available organizational units.


Click to browse a list of available users.


Specifies that this policy be applied to any user authenticated on this subnet.


Provides a space for you to type or select the direction of the data flow to which this policy applies:

Send & Receive enforces these settings when the user is sending or receiving data.

Send enforces these settings when the user is sending data.

Receive enforces these settings when the user is receiving data


Provides a space for you to type the organizational unit to which this policy applies. Click Browse to view a list of available organizational units.


Provides a space for you to type the name of the user to which this policy applies. Click Browse to view a list of available users.


Specifies that this policy be applied to a specific organizational unit.


Specifies that this policy be applied to a specific user.


Provides a space for you to type or select the service level for the data flow:

Best effort gives no assurance of adequate network resources or low delay.

Controlled load approaches that of an uncongested network.

Guaranteed service assures adequate network resources and low delay.


Specifies that this policy be applied to any unauthenticated user requesting bandwidth on this subnet.


Adds a new server allowed to run QoS Admission Control on this subnet, changing the list of servers.


Install QoS Admission Control on the selected server.


Lists the available Windows 2000 Servers that are allowed to run QoS Admission Control on this subnet.


Remove the selected server from the list of servers allowed to run QoS Admission Control on this subnet.


Specifies that a maximum data rate per flow is set on this subnet.


Specifies that unlimited data rate per flow is allowed on this subnet.


Specifies that a maximum peak data rate is specified for this subnet.


Specifies that unlimited peak data rate per flow is allowed on this subnet.


Specifies that an aggregate data rate is specified for this subnet.


Specifies that an unlimited aggregate data rate for all flows is allowed on this subnet.


Specifies that an aggregate peak data rate is specified for this subnet.


Specifies that unlimited data rate per flow is allowed on this subnet.


Provides a space for you to type the password for the QoS Admission Control user account. This user account must be named AcsService and have administrative permissions.


Provides a space for you to type the user name for the QoS Admission Control service user account. This user account must be named AcsService and have administrative permissions.