10000	Reset
10001	Unknown
10002	No video recorder or TV is detected for the selected display.\n\nApply TV output mode anyway?
10003	Matrox PowerDesk
10004	Your screen may flicker for a few seconds while new monitor settings are applied. If your display doesn't reappear correctly, wait 15 seconds, and your original settings will be restored.
10100	Brightness
10101	Saturation
10102	Gamma correction
10103	Hue
10104	Contrast
10105	Anti-flicker
10106	Enhance text
10107	Black and white
10108	Reduce edge flickering
10109	Composite or S-video
10110	SCART - RGB
10111	SCART - Composite
10112	Desktop TV Settings
10113	DualHead DVDMax TV Settings
10200	Prompt before applying desktop scheme
10201	Automatically save/restore desktop icon positions
10202	Automatically save/restore window positions
10203	Show menus in visible display
10204	Use polygon acceleration
10205	Use device bitmaps caching
10206	Use filtering when scaling
10207	Use bus mastering
10208	Page flip during vertical blank
10209	Use 16-bit video quality
10210	Use fogging acceleration
10211	Use 32-bit Z-buffering
10212	Performance
10213	PowerDesk features
10214	Undocumented
10215	Use secondary display controller as a Windows monitor
10216	Start Matrox QuickDesk when Windows restarts
10217	Show Matrox QuickDesk icon on taskbar
10218	Enlarge mouse pointer
10219	Use hardware to draw color mouse pointer
10220	Roll windows up/down ([Shift]+Minimize)
10221	Fade-in PowerDesk dialog boxes
10222	Fade-out PowerDesk dialog boxes
10301	&Yes
10302	OK
10303	Abort
10304	Retry
10305	&No
10306	Cancel
10307	Ignore
10308	Details
10400	Monitor Customizations (*.mpr)
10401	All Files
10402	Matrox PowerDesk couldn't find the "PDMonLst.mpl" file.
10404	%4d x %4d, %2d-bit, %3d Hz
10405	%4d x %4d, %2d-bit, %s
10406	The Matrox monitor settings you selected contain display modes not included in your current Windows monitor settings. Use the settings you selected anyway?\n\nClick "Yes" to use them or "No" to cancel.
10407	The display mode you're currently using isn't included in the selected monitor settings. Add support for this display mode to the selected monitor settings?
10408	The selected file doesn't contain valid Matrox PowerDesk monitor settings.
10409	%4d x %4d, %2d-bit (disabled)
10410	%4d x %4d, %2d-bit
10411	The selected display mode couldn't be tested.
10412	Matrox Monitor Test
10413	%4d x %4d
10414	%2d bits, %d colors
10415	Matrox PowerDesk has restored your last known safe monitor settings.
10416	The file may be of the wrong type, it may be corrupted, or it may have been created with another version of Matrox PowerDesk.
10418	The Matrox monitor list is stored in the "PDMonLst.mpl" file. This file is normally located in your Windows system folder. You can restore this file by reinstalling Matrox PowerDesk.
10419	If your Windows monitor settings support all the display resolutions your monitor is capable of, the selected customized settings are probably not appropriate for your monitor and you should click "No".
10420	The selected monitor settings don't support the display mode you're currently using. It's likely that these settings aren't appropriate for your monitor. We recommend you click "No" and then select different monitor settings.
10421	Current refresh: %d Hz
10422	(Customized by user)
10423	(%s %s)
10424	Customizations can't be disabled because your current display mode isn't supported by your Windows monitor settings. To disable customizations, first change to a display mode supported by your Windows monitor settings.
10425	If you delete the current monitor customizations, they'll be lost. (The Matrox monitor list and customizations saved to file won't be affected.)\n\nDelete monitor customizations?\n\nTo delete customizations, click "Yes".\nTo keep customizations, click "No".
10426	Monitor customizations are currently enabled. To delete them, Matrox PowerDesk must first disable them. Are you sure you want to delete customizations?\n\nClick "Yes" to delete or "No" to cancel.
10427	Your monitor customizations have been re-enabled.
10428	Your monitor customizations have been deleted.
10429	No Windows monitor is selected. Please select a monitor on the Windows "Monitor" property sheet before customizing monitor settings.
10430	These settings may not be supported by your monitor.
10431	One or more selected settings may be beyond the limits of your monitor. These settings may be unavailable for programs that use DirectDraw/Direct3D.
10432	Based on the monitor settings selected in Windows, one or more settings selected with Matrox software may not be supported by your monitor. These settings may not be supported by programs that use DirectDraw or Direct3D. Many programs (especially games) use DirectDraw or Direct3D. If selected monitor settings aren't supported, default settings are used instead. Regular Windows programs (programs that don't use DirectDraw or Direct3D) will use the selected monitor settings.\n\nYou may want to go back and change the monitor settings selected.
10500	Load Monitor Customizations
10501	Save Monitor Customizations
10502	Unavailable
10503	Display modes supported by the "%s" monitor settings:
10600	Your original display settings have been restored.
10601	Matrox PowerDesk couldn't apply the "%s" desktop scheme.
\n
\nRemove this scheme from the list of available desktop schemes?
10602	The following monitors don't support settings in the desktop scheme:
\n
10603	
\nMonitor %d - %d x %d, %d-bit
10604	
\nMonitor %d - disabled
10700	One or more functions couldn't be found in PDTools.dll. The Matrox PowerDesk control center will close.\n\nPlease reinstall Matrox PowerDesk.
10701	Matrox PowerDesk software isn't supported by any display driver currently in use. Matrox PowerDesk will close.
10702	The "Show menus in visible display" feature couldn't be initialized. This feature won't be available.
10703	Matrox Online Registration
10704	You can still register online by selecting "Online Registration" in the Matrox QuickDesk menu.
10705	The Matrox PowerDesk feature you tried to use isn't available. To be able to use this feature, install version %s or later of DirectX.\n\nFor the latest version of Microsoft DirectX see the Microsoft Web site (www.microsoft.com).
10706	The Matrox PowerDesk feature you tried to use isn't available. To be able to use this feature, install version %s or later of DirectX.\n\nFor the latest version of Microsoft DirectX see the Microsoft Web site (www.microsoft.com).
10707	A "DualHead" feature currently can't be used because the secondary display is already being used by the "DualHead DVDMax" feature.
10708	A "DualHead" feature currently can't be used because the secondary display is already being used by the "DualHead Clone" feature.
10709	A "DualHead" feature currently can't be used because the secondary display controller is already being used by digital video software.
10710	A "DualHead" feature currently can't be used because there isn't enough graphics memory available or bus mastering is disabled. To use this feature, try lowering your display resolution or enabling bus mastering.
10711	This feature can't be used with the current display settings.\n\nTo use this feature, try lowering settings for your display. Specifically, try lowering the color palette, the resolution, and/or the current refresh rate. (A 16-bit color palette is recommended for many features.)\n\nTo access display settings, right-click your Windows desktop background and then click "Properties" > "Settings".
10712	Matrox PowerDesk
10713	For changes to take effect, your computer needs to be restarted.\n\nRestart your computer now?
10800	Matrox DeskNav
10801	Show &Menu
10802	&Preferences...
10803	Zoom &In
10804	Zoom &Out
10806	&Select Monitor
10807	&Go to Location
10808	Help
10809	&CenterWINDOW
10810	None
10900	Matrox Diagnostic
10901	No Matrox graphics hardware is detected in your computer.\n\nMatrox Diagnostic will close.
10902	A results file couldn't be created.
10903	Test date and time: %s, %s.
\n
10904	Matrox Diagnostic Results
\n
10905	Results saved in file "%s".
10906	Matrox PowerDesk software isn't supported by the display driver Windows is currently using. Matrox Diagnostic will close.
10907	WARNING
10908	ERROR
10909	Click "Test Now" to see test results.
10910	No problem detected.
10911	General tests
10912	%s - Display %d
10913	This display driver isn't compatible with this version of Matrox Diagnostic. No tests are available for this driver.
10914	This isn't a Matrox display driver. No tests are available for this driver.
10915	Is recent DirectX software installed?
10916	DirectX version OK
10917	WARNING: DirectX not installed.
\n
\nDESCRIPTION: Programs that use DirectX may not work properly. Install DirectX from your Matrox CD-ROM or system disks. For more information, see your Matrox or system manual.
\n
\n
10918	WARNING: Old version of DirectX installed.
\n
\nDESCRIPTION: Programs using DirectX may run slower. Reinstall DirectX from your Matrox CD-ROM or your system disks. See "Troubleshooting" in your Matrox or system manual.
\n
\n
10919	Is bus mastering (for display acceleration) working?
10920	ERROR: No IRQ for your Matrox hardware.
\n
\nDESCRIPTION: Your Matrox hardware hasn't been assigned an IRQ. Some programs may not work properly. See "Troubleshooting" in your Matrox or system manual.
\n
\n
10921	ERROR: IRQ assigned to Matrox hardware isn't working.
\n
\nDESCRIPTION: Some programs may not work properly. See "Troubleshooting" in your Matrox or system manual.
\n
\n
10922	ERROR: Bus mastering not available.
\n
\nDESCRIPTION: Some programs may not work properly. Your Matrox hardware may be in a "slave" expansion slot. See "Troubleshooting" in your Matrox manual or your system manual.
\n
\n
10923	Bus mastering seems to work correctly but is turned off in Matrox PowerDesk.\n\nDo you want Matrox Diagnostic to turn bus mastering on?
10924	Error detected with bus mastering.\n\nDo you want Matrox Diagnostic to turn bus mastering off in Matrox PowerDesk? (You can turn it on again later.)
10925	Error detected with bus mastering, however, this feature is already turned off in Matrox PowerDesk.
10926	Bus mastering appears to be working properly.
10927	Matrox Diagnostic has changed bus mastering in the Matrox PowerDesk advanced settings. It's recommended you restart your computer for the changes to take effect.\n\nRestart your computer now?\n
10928	Is the add-on graphics memory module (if any) working okay?
10929	No memory problem detected.
10930	DESCRIPTION: The add-on graphics memory module is slower than the memory built into your Matrox hardware. All your graphics memory will run at the slower speed.
\n
\n
10931	Slow graphics memory module.
\n
\n
10932	DESCRIPTION: The memory type of the add-on graphics memory module is not compatible with the memory built into your Matrox hardware. The memory module will not be used.
\n
\n
10933	Incompatible graphics memory module.
\n
\n
10934	Is redundant Matrox hardware installed?
10935	No conflict detected.
10936	DESCRIPTION: Your Matrox graphics hardware has video editing hardware built into it. For video editing to work properly, remove any separate Matrox video editing hardware attached to your Matrox graphics hardware.
\n
\n
10937	Redundant Matrox video editing harware is detected.
\n
\n
10938	None
10939	NTSC
10940	PAL
10941	Error code number: %d
10942	Unknown error with an add-on for your Matrox hardware.
\n
\n
10943	DESCRIPTION: An unknown error has been detected with an add-on for your Matrox hardware. Take note of the error code number and contact the vendor of the add-on.
\n
\n
10944	No tests are available for this adapter.
11000	A window class couldn't be created. Matrox QuickDesk will close.
11001	A window couldn't be created. Matrox QuickDesk will close.
11002	&Desktop Schemes
11004	D&esktop Icons
11005	&Window Positions
11006	&Online Registration
11007	&PowerDesk Help
11008	&Start Screen Saver
11009	Start Matrox Dia&gnostic
11010	St&art Matrox DeskNav
11011	Display &Properties...
11012	Close Matrox &QuickDesk
11013	&Save
11014	&Restore
11015	&Automatic
11016	&Add...
11017	&Organize...
11019	2&56 Colors
11020	High Color (&16-bit)
11021	True Color (&24-bit)
11022	True Color (&32-bit)
11024	Hot &Keys...
11025	Matrox PowerDesk Hot Keys
11026	A scheme with the same name already exists. Do you want to overwrite the existing scheme?\n\nClick "Yes" to overwrite or "No" to type a different name.
11027	A desktop scheme couldn't be created from your current display settings.
11028	Matrox QuickDesk
11029	Delete the "%s" scheme?\n\nClick "Yes" to delete or "No" to cancel.
11030	Close PDesk.exe
11031	&Tip of the Day...
11032	&More Schemes...
11033	Matrox PowerDesk
11034	The name typed is already being used by another desktop scheme. Please type a different name.
11035	Matrox PowerDesk
11036	&View Readme File
11037	&About
11038	About Matrox PowerDesk
11039	&Help
11040	S&ettings...
11041	Second
11042	Seconds
11043	Minute
11044	Minutes
11045	Automatically Save Windows Positions
11046	Matrox QuickDesk - Add Desktop Scheme
11047	(TV)
11048	(Clone)
11049	S&ettings...
11050	Desktop Icon Features
11051	%d pixels
11052	The scheme name contains invalid characters. The scheme won't be added.
11053	&TurboGL Manager...
11054	Multi-Display &Controls...
11055	Matrox PowerDesk - Multi-Display Controls
11056	%d (Output %d)
11057	&Make All Visible
11058	S&nap to Display...
11059	Matrox QuickDesk - Snap to Display
11062	&Get Latest Driver...
11063	Matrox MultiDesk
11064	&Manage Desktops...
11065	&Use Matrox MultiDesk
11100	TV output (add-on)
11101	DVD decoder (add-on)
11102	Matrox Rainbow Runner G-Series (add-on)
11103	MJPEG compressor/decompressor (add-on)
11104	Digital flat panel connector (add-on)
11105	TV tuner (add-on)
11106	TV output (built-in)
11107	DVD decoder (built-in)
11108	Video input (built-in)
11109	MJPEG encoder/decoder (built-in)
11110	Digital flat panel connector (built-in)
11111	TV tuner (built-in)
11112	%d MB
11113	DualHead (add-on)
11114	DualHead (built-in)
11115	Graphics hardware
11116	Graphics software (versions)
11117	Matrox driver package: %s
11118	Display driver: %s
11119	Mini-VDD: %s
11120	Kernel driver: %s
11121	DirectDraw/Direct3D driver: %s
11122	Matrox PowerDesk: %s
11123	Microsoft DirectX: %s
11124	Model: %s
11125	Graphics chip: %s
11126	Serial number: %s
11127	Graphics memory
11128	Memory type: %s
11129	Amount of memory: %s
11130	Maximum RAMDAC speed: %s
11131	Graphics BIOS: %s
11132	Extra hardware
11133	TurboGL driver: %s
11134	OpenGL ICD: %s
11200	The current display resolution doesn't support the selected TV settings. Do you want to change to a resolution that supports your TV settings?\n\nClick "Yes" to change to a supported resolution or "No" to cancel your changes.
11300	Display %d: %4d x %4d, %2d-bit %s
11301	PixelTOUCH
11302	CenterWINDOW
11303	Enable/Disable PanLOCK
11305	Enable/Disable PanNOW
11306	Save Icon Positions
11307	Save Window Positions
11308	Restore Icon Positions
11309	Restore Window Positions
11310	PowerDesk features
11311	PowerDesk schemes
11312	Use the PixelTOUCH hot key to zoom in on your current mouse pointer position. Use it repeatedly to cycle through the different zoom factors (x1, x2, x4, x1, and so on).
11313	Use the CenterWINDOW hot key to center the visible part of your display area (view area) on the active window. This feature is useful when parts of your desktop area are outside your view area, as with a virtual desktop or the Matrox zoom feature.\n\nIf a window is larger than your view area, CenterWINDOW lines up the upper-left corner of your view area with the upper-left corner of the active window.
11314	Use the PanLOCK hot key to disable or enable panning when parts of your desktop area are outside your view area (as with a virtual desktop or the Matrox zoom feature). When panning is enabled, you can move your mouse pointer to the edge of your view area to pan in that direction.
11316	While using the Matrox zoom feature, you can use the PanNOW hot key to enable or disable the centering of your display around your mouse pointer.
11317	Use the "Save Icon Positions" hot key to save the positions of desktop icons for your current desktop area. After saving, you can restore their positions with the "Restore Icon Positions" hot key.\n\nNote: If you're using a multi-display desktop and the virtual position of a display is changed, your desktop area also changes.
11318	Use the "Save Window Positions" hot key to save the positions and sizes of program windows for your current desktop area. After saving, you can later restore their positions and sizes with the "Restore Window Positions" hot key. Window position information is saved until you're logged out of Windows.\n\nNote: If you're using a multi-display desktop and the virtual position of a display is changed, your desktop area also changes.
11319	Use the "Restore Icon Positions" hot key to move your desktop icons to their last saved position for the current desktop area. Icons aren't moved if their positions aren't saved.
11320	Use the "Restore Window Positions" hot key to restore the position and size of your program windows. Windows are restored to their last saved positions and sizes for the current desktop area. If the size and position of a window isn't saved, it isn't affected.
11321	Matrox PowerDesk
11322	Hot key changes couldn't be saved because of the following conflicts:
\n
\n
11323	The "%s" hot key is the same as the "%s" hot key.
\n
11324	Matrox PowerDesk
11325	One or more changes to hot keys couldn't be saved. Windows may already be using one or more of the keyboard shortcuts you defined.
11326	Start Screen Saver
11327	Use the "Start Screen Saver" hot key to start your screen saver right away.
11328	DualHead Zoom - Enable
11329	Use the "DualHead Zoom - Enable" hot key to select a region on your main display which will be displayed full-screen on your secondary display.
11330	Swap All Windows
11331	Use the "Swap All Windows" hot key to move all visible windows from one display to another. If your system has more than two displays and this hot key is pressed repeatedly, windows are cycled through each display in your system.
11332	Swap Active Window
11333	Use the "Swap Active Window" hot key to move the currently active window from one display to another. If your system has more than two displays and this hot key is pressed repeatedly, a window is cycled through each display in your system.
11334	DualHead Zoom - Smooth Zoomed Area
11335	DualHead Zoom - Follow Mouse Pointer
11336	Use the "Smooth Zoomed Area" hot key to enable/disable digital filtering while using the "DualHead Zoom" feature. Filtering is good for general usage, while a non-filtered zoom is more appropriate for image editing.
11337	Use the "Follow Mouse Pointer" hot key to control whether the zoomed area follows the mouse pointer in your main display while the "DualHead Zoom" feature is used.
11338	DualHead Zoom - Disable
11339	Use the "DualHead Zoom - Disable" hot key to disable the "DualHead Zoom" feature and to be able to use your secondary display for another DualHead feature.
11340	DualHead Zoom - Snapshot to Clipboard
11341	DualHead Zoom - Snapshot to File
11342	Use the "Snapshot to File" hot key to save your currently zoomed area to a file. You can then use this image with any program that supports bitmap (BMP) files.
11343	Use the "Snapshot to Clipboard" hot key to copy your currently zoomed area to the Windows clipboard. You can then paste this image in any program that supports bitmap (BMP) files.
11344	This keyboard shortcut must include the [Shift], [Ctrl], or [Alt] key. The keyboard shortcut entered won't be applied.
11345	Matrox PowerDesk - Error
11434	Find Mouse Pointer
11435	Use the "Find Mouse Pointer" hot key to locate your mouse pointer on your Windows desktop. This may be useful if your Windows desktop includes more than one display.
11436	Move All Windows to Primary Display
11437	Use the "Move All Windows to Primary Display" hot key to move all windows (including certain dialog boxes) to your primary display. Your "primary display" is the one that first displays information when your computer restarts.
11438	DualHead Zoom - Select Region
11439	If more than one DualHead Zoom region is defined, use the "Select Region" hot key to select one of these regions.\n\nIf your hot key includes a modifier key (for example, [Ctrl] or [Alt]), you can use arrow keys to select a region. To do this: (1) Press the hot key without releasing the modifier key. (2) Use the arrow keys to highlight a region. (3) Release the modifier key to select a highlighted region.\n\n(While holding a modifier key, you can press [Delete] to remove a highlighted region from the region list.)
11440	Show QuickDesk Menu
11441	Use the "Show QuickDesk Menu" hot key to have the Matrox QuickDesk menu appear at the current position of your mouse pointer.
11500	"DualHead Zoom" settings couldn't be saved.
11600	"DualHead DVDMax" settings couldn't be saved.
11700	DualHead disabled -- Select this to disable the secondary display of your Matrox graphics hardware.
11701	DualHead Multi-Display -- Click this to add an extra display to your Windows desktop.
11702	DualHead Clone -- View a copy of your main display on your secondary display.\n\nDualHead Zoom -- Use your secondary display to view a zoomed-in area of your main display.\n\nDualHead DVDMax -- Play digital video in a window on your main display and, at the same time, view that video full-screen on your secondary display.
11703	The current display resolution doesn't support the "DualHead Clone" feature. Do you want to change to a resolution that supports this feature?\n\nClick "Yes" to change to a supported resolution or "No" to cancel your changes.
11705	%d x %d\n(Plug-and-Play monitor)
11706	The "DualHead Clone" feature currently can't be used because the secondary display is being used by another DualHead feature. "DualHead Clone" will automatically be used when the secondary display becomes available.
11707	To use "DualHead Multi-Display" mode, Matrox PowerDesk has cleared the Windows check box called "Hide modes that this monitor cannot display". (This check box is in the advanced settings of the "Display Properties" dialog box.)\n\nPlease don't enable this check box while in DualHead Multi-Display mode -- doing so may cause problems. When DualHead Multi-Display mode is disabled, this option will be automatically restored to its previous setting.
11708	DualHead Multi-Display -- Add an extra display to your Windows desktop.\n\nNote: While using this mode, you can also use the "DualHead Zoom" feature.
11709	DualHead Clone -- View a copy of your main display on your secondary display.\n\nDualHead DVDMax -- Play digital video in a window on your main display and, at the same time, view that video full-screen on your secondary display.\n\nNote: While using "DualHead Clone or DVDMax" mode, you can also use the "DualHead Zoom" feature.
11710	Dual&Head Clone or DVDMax
11800	Start Matrox DeskNav.
11801	Start Matrox DeskNav.\n\nSyntax:\n	DESKNAV\n\nExample:\n	pdeskcmd /desknav\n
11802	Show description of desktop configuration.
11803	Show description of desktop configuration.\n\nSyntax:\n	DESKTOPDESC\n\nExample:\n	pdeskcmd /desktopdesc\n
11804	Start Matrox Diagnostic.
11805	Start Matrox Diagnostic.\n\nSyntax:\n	DIAG\n\nExample:\n	pdeskcmd /diag\n
11806	Open Matrox PowerDesk Hot Keys dialog box.
11807	Open Matrox PowerDesk Hot Keys dialog box.\n\nSyntax:\n	HOTKEY\n\nExample\n	pdeskcmd /hotkey\n
11808	Display this help.
11809	Use "/?:command" for more information on a specific command.\n(Replace "command" with a specific command name.)\n
11810	Change display mode.
11811	Change display mode.\n\nSyntax:\n	MODE:[Dn,]Wx,Hy[,Pn]\n	Dn: "n" is the display number (default is 1).\n	Wx: "x" is the display width in pixels. *\n	Hy: "y" is the display height in pixels. *\n	Pn: "n" is the color palette in bits per pixel (8, 16, 24, or 32).\n	    (Default is the current color palette.)\n\n* Only supported display resolutions can be used.\n\nExamples:\n	pdeskcmd /mode:d2,w640,h480,p8\n	pdeskcmd /mode:w800,h600\n
11812	Enable/disable PanNOW.
11813	Enable/disable PanNOW.\n(To use PanNOW, Matrox zoom feature must be in use).\n\nSyntax:\n	PANNOW:[Dn,]state\n	Dn: "n" is the display number (default is 1)\n	state: "on" or "off"\n\nExamples:\n	pdeskcmd /pannow:off\n	pdeskcmd /pannow:d1,on\n
11814	Show Matrox QuickDesk icon on taskbar.
11815	Show Matrox QuickDesk icon on taskbar.\n\nSyntax:\n	QUICKDESK\n\nExample:\n	pdeskcmd /quickdesk\n
11816	Restore desktop icon positions.
11817	Restore desktop icon positions.\n(To save icons positions, use SAVE_ICONS.)\n\nSyntax:\n	RESTORE_ICONS\n\nExample:\n	pdeskcmd /restore_icons\n
11818	Restore desktop configuration.
11819	Restore desktop configuration.\n(To save your desktop configuration, use SAVEDESK.)\n\nSyntax:\n	RESTOREDESK\n\nExample:\n	pdeskcmd /restoredesk\n
11820	Restore desktop window positions.
11821	Restore desktop window positions.\n(To save window positions, use SAVE_WINDOWS.)\n\nSyntax:\n	RESTORE_WINDOWS\n\nExample:\n	pdeskcmd /restore_windows\n
11822	Save desktop icon positions.
11823	Save desktop icon positions.\n(To restore icon positions, use RESTORE_ICONS.)\n\nSyntax:\n	SAVE_ICONS\n\nExample:\n	pdeskcmd /save_icons\n
11824	Save current desktop configuration.
11825	Save current desktop configuration.\n(To view a description of your desktop configuration, use DESKTOPDESC)\n(To restore your desktop, use RESTOREDESK.)\n\nSyntax:\n	SAVEDESK\n\nExample:\n	pdeskcmd /savedesk\n
11826	Save desktop window positions.
11827	Save desktop window positions.\n(To restore window positions, use RESTORE_WINDOWS.)\n\nSyntax:\n	SAVE_WINDOWS\n\nExample:\n	pdeskcmd /save_windows\n
11828	Apply desktop scheme.
11829	Apply desktop scheme.\n(To save a scheme, use Matrox QuickDesk.)\n\nSyntax:\n	SCHEME:schemename|"scheme name"\n	schemename: One-word scheme name\n	"scheme name": Scheme name with spaces\n\nExamples:\n	pdeskcmd /scheme:MyScheme\n	pdeskcmd /scheme:"My Scheme"\n
11830	Change zoom factor.
11831	Change zoom factor.\n\nSyntax:\n	ZOOM:[Dn,]z\n	Dn: "n" is the display number (default is 1)\n	z: "z" is the zoom factor (1, 2, or 4)\n\nExamples:\n	pdeskcmd /zoom:d1,2\n	pdeskcmd /zoom:4\n
11832	Pause after each full screen of information.
11833	Pause after each full screen of information.\n\nSyntax:\n	P\n\nExample:\n	pdeskcmd /p
11850	All commands must begin with a slash (/) or a hyphen (-).
11851	Command completed successfully.
11852	Command failed.\n(Type "pdeskcmd /?" for more information.)
11853	Command unknown.\n(Type "pdeskcmd /?" for a list of commands.)
11854	Press any key to continue...
11855	+------------+---------------------------------------------------------------+\n
11856	| Display %2i | Device name: %-48s |\n
11857	| %-18s%-56s |\n
11858	Display settings:
11859	%i x %i, %i bits, %i colors
11860	Video format:
11861	Computer monitor
11862	Generic NTSC TV
11863	Generic PAL TV
11864	Refresh rate:
11865	%i Hz
11866	Display position:
11867	Upper left (%i, %i), lower right (%i, %i)
11868	Windows desktop currently extends onto this display.
11869	Windows desktop doesn't currently extend onto this display.
11870	Unknown
11871	Save gamma ramp.
11872	Save current gamma ramp on specified display\n\nSyntax:\n	SAVEGAMMA:[Dn,]filename\n	Dn: "n" is the display number (default is 1)\n	"Filename" is the name of the file where the gamma ramp is to be saved.\n\nExamples:\n	pdeskcmd /savegamma:D2,c:\temp\mygamma.sgm\n	pdeskcmd /savegamma:c:\temp\mygamma2.sgm\n\nSee also RESTOREGAMMA.
11873	Restore gamma ramp.
11874	Restore the gamma ramp file previously saved on the specified display\n\nSyntax:\n	RESTOREGAMMA:[Dn,]filename\n	Dn: "n" is the display number (default is 1)\n	"Filename" is the name of the file where the gamma ramp stored.\n\nExamples:\n	pdeskcmd /restoregamma:D2,c:\temp\mygamma.sgm\n	pdeskcmd /restoregamma:c:\temp\mygamma2.sgm\n\nSee also SAVEGAMMA.
11900	For changes to take effect, your computer needs to be restarted. After your computer is restarted, Matrox software will prompt you to change Windows settings.\n\nClick "OK" to restart your computer.
11901	To manually change display settings, you can right-click your Windows desktop background and then click "Properties" > "Settings". To access DualHead controls, click "Advanced" > "DualHead".
11902	You've chosen to enable "DualHead Multi-Display" mode. In this mode, an extra display can be part of your Windows desktop.\n\nYou can change the resolution for your displays by moving the Windows "Screen area" slider (which now appears on your Windows desktop).\n\nNote: Only certain "Screen area" settings use the extra display. A "Screen area" setting that uses the extra display is twice as wide or tall as its corresponding single-display setting. For example, to use 2 side-by-side displays with resolutions of 800 x 600, select 1600 x 600 with the "Screen area" slider.\n\nThe next time you want to access the "Screen area" slider, you can right-click your Windows desktop background and then click "Properties" > "Settings". To access other DualHead controls, click "Advanced" > "DualHead". To access more DualHead-related controls, click the "Matrox QuickDesk" icon on your Windows taskbar and then click "Multi-Display Controls".
11903	You've chosen to enable "DualHead Multi-Display" mode.\n\nTo enable your extra display, use the Windows "Settings" property sheet. To do this, select display 2, then enable the "Extend my Windows desktop onto this monitor" option. With this property sheet, you can also adjust other settings for this display.\n\nThe next time you want to access the "Settings" property sheet, you can right-click your Windows desktop background and then click "Properties" > "Settings". To access DualHead controls, click "Advanced" > "DualHead".
19999	0009