0	 error
1	 warning
2	 note
3	 msg
4	 unknown error; consult documentation for technical support options
5	<NUL>
6	 out of memory
7	 cannot open file '%s'
8	 cannot close file '%s'
9	 invalid file or disk full : cannot seek to 0x%lx
10	 invalid or corrupt file : cannot read at 0x%lx
11	 cannot write file at 0x%lx
12	 cannot remove file '%s'
13	 cannot rename file '%s'
14	 invalid /BASE argument '%s'
15	 Has a conflicting machine type of '%s'
16	 invalid machine type
17	 Machine switch must be specified
18	 base key '%s' not found
19	 syntax error in option '%s'
20	 syntax error in '%s' statement
21	 invalid ordinal number '%s'
22	 %d unresolved externals
23	 duplicate ordinal number '%d'
24	 invalid keyword '%s'
25	 failure during conversion to COFF : file invalid or corrupt
26	 Conflicting subsystem
27	 library is corrupt
28	 cannot find resolution for weak extern %s
29	 Linker miscalc (base relocations off by 0x%lx)
30	 no library file specified
31	 invalid format for MS-DOS stub file '%s'
32	 invalid or corrupt file
33	 invalid argument specified with /SECTION
34	 corrupt debugging information in object file '%s'
35	 a program database does not have the capacity for this many modules, relink '-pdb:none'
36	 failure during build of exports file
37	 invalid or corrupt file : no symbol for comdat section 0x%x
38	 error with LINK_REPRO var; cannot open '%s'
39	 -merge created circular link for section '%s'
40	 no argument specified with option '/%s'
41	 invalid number specified with option '/%s'
42	 failure during conversion to COFF : cannot copy temp file '%s'
43	 output filename matches input filename '%s'
44	 /BIND error : %s
45	 /REBASE error : %s
46	 cannot resolve one or more undecorated symbols
47	 /VXD command-line option required
48	 specified import library filename matches exports file '%s'
49	 Special symbol '%s' already defined.
50	 .sbss sections not supported
51	 failed to spawn a full build
52	 no output file specified
53	 library with zero objects not allowed
54	 invalid export specification
55	 expected aux symbol for comdat section 0x%x
56	 invalid selection for comdat section 0x%x
57	 section 0x%x alignment (%u) greater than /ALIGN value
58	 link failed because of fixup errors
59	 cannot adjust code @ offset=0x%08x, va=0x%08x
60	 invalid or corrupt file; file contains relocs but header has no machine type specified
61	 error reading program database '%s'
62	 error writing to program database '%s'
63	 invalid signature in referenced program database '%s'
64	 invalid age in referenced program database '%s'
65	 module '%s' contains a precompiled header which references another precompiled header, cannot generate program database, recompile all '-Zi'
66	 cannot (yet) overwrite Visual C++ 1.0 program database '%s'
67	 incompatible PDB format in '%s'; delete and rebuild
68	 cannot find referenced program database '%s'
69	 program database '%s' differs from previous link; relink or rebuild
70	 insufficient memory for incremental links; relink with /incremental:no
71	 '%s' should have contained shared debugging information for a precompiled header; either the object was not linked or it has been overwritten
72	 More than one entrypoint in startup section.
73	 >32K of near thunks.
74	 Small model section %s has function(s) past 64k.
75	 Found non-zero value in raw data - expected a zero value.
76	 Fixup overflow.  Thunk for symbol %s is >32k from a5 and was referenced by a 16-bit fixup.
77	 Fixup overflow.  Data symbol %s is >32k from a5 and was referenced by a 16-bit fixup.
78	 Fixup overflow.  Target symbol %s is >32k from current location and was referenced by a 16-bit fixup.
79	 Pcode fixup overflow.  Target symbol %s is out of range (code section is too large).
80	 Maximum pcode resource number exceeded by section %s.
81	 Maximum offset accepted by profiler exceeded by symbol %s.
82	 Maximum section number accepted by profiler exceeded by section %s.
83	 Entry point must be specified and defined.
84	 Code fixup found in data section %s.
85	 Data fixup found in code section %s.
86	 CSConst fixup not in same section as symbol %s.
87	 DIFF fixup pair in section %s specifies different section numbers.
88	 DIFF fixup pair overflow.  Target symbol is >256 bytes from previous symbol.
89	 DIFF fixup pair overflow.  Target symbol is >32k from previous symbol.
90	 Bad file - %s (probably empty).
91	 EXPORTS keyword doesn't have function set ID.
92	 Cannot renumber startup section %s.  Startup section must be CODE1.
93	 Cannot assign resource number 1 to CODE section %s.  CODE1 is reserved for the startup section.
94	 Cannot assign resource number 0 to CODE section %s.  CODE0 is reserved for the jump table.
95	 %s is not a valid FLAGS keyword.
96	 Illegal A5 reference to symbol '%s' from standalone code
97	 Attempt to call data symbol '%s' as a function
98	 Object files should not be specified when building a Mac import library.
99	 No ASLM library ID specified.
100	 function set '%s' multiply defined.
101	 Target pcode symbol '%s' must be <64k into code section when -opt:ref is used.
102	 no ASLM function set ID specified
103	 corrupted object or old compiler (bad Pcode entry point)
104	 run-time fixups in startup segment
105	 exceeded code section number limit
106	 Run-time fixup on odd address
107	 CSECTABLE fixup must be to external symbol in code
108	 DUPCON fixup must be to external symbol in code
109	 Multiple symbols in same con refd by dupcon fixup
110	 Illegal CTOABSC32 reloc in dupcon
111	 Duplicate resource numbers specified
112	 Illegal A5 ref in sacode
113	 Renaming of resource type only allowed for code sections
114	 unresolved external symbol '%s'
115	 invalid fixup found, type 0x%hx, target '%s'; fixup ignored
116	 gp relative fixup to symbol not in .sdata '%s'; fixup ignored
117	 gp relative fixup overflow; .sdata section is too large; fixup ignored
118	 no object files specified; libraries used
119	 %s defined in %s
120	 invalid library format; library ignored
121	 no objects used from library %s
122	 %s already defined in %s; second definition ignored
123	 Bad object - fixup to far
124	 Bad object - unmatched PAIR relocation - ignored
125	 invalid version number %s; default version assumed
126	 unknown subsystem %s; default assumed
127	 Found '%s', expected %s
128	 image size 0x%lx exceeds specified maximum 0x%lx
129	 cannot find member object %s
130	 %s commit exceeds reserve; commit size set to %0xlx
131	 %s statement not supported; ignored
132	 number of type indecies exceeds 64K in program database '%s', subsequent type information will be discarded
133	 corrupt string table (table end); new end assumed
134	 cannot find unique match for symbol '%s'
135	 base address %lx not a 64K multiple; assumed %lx
136	 nodefaultlib switch in directive section in %s
137	 CVPACK error
138	 Obsolete switch -%s ignored
139	 invalid file offset 0x%lx for %s; category not dumped
140	 no subsystem specified; CONSOLE assumed
141	 converting object format from OMF to COFF
142	 '%s' does not exist; ignored
143	 displaying raw data in %u units per line
144	 section '%s' does not exist
145	 corrupt string table (size); string table ignored
146	 no edit options specified
147	 object specified more than once; extras ignored
148	 invalid -align value %li. (must be power of 2.)
149	 unrecognized option '%s'; ignored
150	 creating LINK_REPRO test case in dir '%s'
151	 LINK_REPRO is set to current directory; ignored
152	 cannot edit library file '%s'; ignored
153	 cannot edit invalid file '%s'; ignored
154	 exported symbol '%s' also imported
155	 extra delimiter in /EXPORT specification
156	 using .EXP file; ignoring .DEF file '%s'
157	 invalid fixup found, address %08lx; fixup ignored
158	 extra arguments ignored for option '/%s'
159	 '%s' should precede '%s' in the link command line
160	 checksum set to 0 (calculation not supported on this OS)
161	 %s already specified; additional resource file ignored
162	 stub file missing full MS-DOS header; rebuild stub with /KNOWEAS 16-bit LINK option
163	 /NOSTUB ignored because no DOS stub is present
164	 '%s' switch not compatible with '%s' target machine (switch ignored)
165	 invalid option specification '/%s'; ignored
166	 '%s' cannot be ordered; ignored
167	 DLL contains .sdata section
168	 ambiguous entry point; selected '%s'
169	 -machine not specified.  Defaulting to %s
170	 Unable to create map and/or checksum image.  Checksum set to 0
171	 /OUT:%s directive differs from output filename '%s'; ignoring directive
172	 ignoring /%s due to /%s specification
173	 invalid linker database '%s'; linking non-incrementally
174	 exports file '%s' used; ignoring other export specifications
175	 multiple '%s' sections found with different attributes (%08lX)
176	 no write permission for linker database '%s'; linking non-incrementally
177	 /%s specification not CV; old debug format used
178	 insufficient disk space; linking non-incrementally
179	 'MAPPED' option not supported - ignored
180	 %s
181	 inconsistent swapper prolog/epilog being used, assume large model
182	 Non-zero offset to thunk '%s' at fixup location
183	 Possible reference to non-application memory when referencing target symbol '%s'
184	 function set '%s' contains no functions.
185	 Target pcode symbol '%s' is >64k into section '%s' so the native entry point will be used.
186	 insufficient disk space; performing full link
187	 invalid .ILK file found; performing full link
188	 LINK options changed; performing full link
189	 %s not found or not built by the last incremental link; performing full link
190	 exports changed; performing full link
191	 program database %s missing; performing full link
192	 too many changes; performing full link
193	 object file added; performing full link
194	 object file removed; performing full link
195	 library changed; performing full link
196	 internal limit exceeded; performing full link
197	 precompiled types found; performing full link
198	 padding exhausted: performing full link
199	 symbol reference set changed; performing full link
200	 bss change; performing full link
201	 absolute symbol changed; performing full link
202	 incremental link succeeded
203	 incremental link succeeded: no changes found
204	   Creating library %s and object %s from %s definition file.
205	Searching Libraries
206	Done Searching Libraries
207	Start Generating .exp file
208	Command:
209	End Generating .exp file
210	Start Pass1
211	End Pass1
212	Searching %s:
213	Found %s
214	(referenced in %s)
215	     *** loaded %s
216	Start Pass2
217	End Pass2
218	Processed -nodefaultlib (suppressing all default libs)
219	Processed -nodefaultlib:%s
220	Processed -defaultlib:%s
221	Discarded %s
222	Discarded '%s' from %s
223	Replacing %s
224	<NUL>