******FAXmaker dialing Logic Patch for Faxmaker for Exchange *********

-Copying the Patch Files-


The files in the patch must be copied to the following directories on the Exchange server machine

To the FAXmaker Directory
FGWSPOOL.DLL
FGWMSERV.EXE
FGWSRVC.EXE
FGWCONFG.EXE

To the windows\system32 directory
FGW_IN.DLL
FGW_OUT.DLL 



-The Dialing Logic-

FAXmaker may be instructed to process fax numbers which it dials.

The general fax number format supported is +C (A) N where C, A and N are the country code, area code and phone number 
respectively.

The fax number processing consists in :

1)Replacing the leading + with the international dialing prefix for international calls.
2)Chopping-off the country code for national calls (resulting in fax format of (A) N ).
3)Chopping-off the country code and are codea for calls within the same area (resulting in a fax format of N ).


For these features to be used it is important that the +C (A) N format be used. Also FAXmaker must be configured
as described in the following section.


FAXMAKER CONFIGURATION

The dialing logic can be set by editing fgwconfg.ini located in the FAXmaker directory.

1. Open fgwconfg.ini and find the 'Phone Properties' section. 
   If not present move to the end of the file and enter :

[Phone Properties]

2. Following the section name enter the variable values for the internation dialing prefix,country code and area code 
as follows.

[Phone Properties]
InternationalPrefix=<international dialing prefix>
CountryCode=<country code>
AreaCode=<area code>

A typical entry may be as follows :

[Phone Properties]
InternationalPrefix=00
CountryCode=44
AreaCode=181