1001	The Network Administration Installation requires you to establish a shared directory on the server for communication between you and the 
1002	users of F-PROT Professional over the network. The shared directory must be visible to all users and you should make sure the users have full (read/write/create/delete) access rights to that directory.
1003	As system administrator, you should specify a password. F-PROT for Windows 95 will require this password whenever it is 
1004	started in or switched to Administration mode.
1010	F-PROT for Windows 95 Installation
1011	F-PROT for Windows 95
1012	F-Agent
1013	F-PROT Gatekeeper
1014	F-PROT dll-libraries
1020	F-PROT for Windows 95 Installation
1021	No administrator's password was given. You will not be allowed to proceed with the installation unless you specify a password.\nPress OK to go back to previous dialog.
1022	You already have F-PROT for Windows 95 installed on your system. Your current setting will be overwritten; you should select 
1023	UPDATE installation to update your program files without changing your settings.\n\nPress OK to proceed with the installation, or Cancel to go back to the previous dialog.
1024	Unable to create custom dialog.\nExiting installation program.
1025	F-PROT for Windows 95 seems to be installed at\n\n     
1026	\nDo you wish to install the update to a different directory?\nPress OK to proceed by installing the update to a different directory than the previous version, or Cancel to go back to the previous dialog.
1030	Installation complete
1031	\nF-PROT for Windows 95 installation is complete.
1032	F-PROT Professional for Windows 95 Installation
1033	F-PROT Professional for Windows 95 was not able to install successfully.\nYou will have to install it again.
1040	Unable to get the handle of a dialog.\nExiting installation program. 
1041	Couldn't get the handle of a window.
1042	Couldn't stop 
1043	Couldn't reload 
1044	Couldn't load 
1045	 is active and will be terminated to be able to continue the installation.
1046	Configuring 
1047	Please, start manually 
1051	Updating Windows Desktop
1052	Please enter disk
1053	Please insert the disk labeled "Search String Definitions".
1054	Please, insert F-PROT Professional for Windows 95 installation disk #3.
1055	You have cancelled the installation.
1056	The target is read-only and files cannot be copied.
1057	The disk inserted in the drive wasn't the one requested.
1058	Error
1059	OK
1060	Continue
1061	Retry
1062	Cancel
1063	Install
1070	. Retry?
1071	Couldn't create directory 
1072	F-PROT for Windows 95 already exists on hard disk.\nThis installation disk contains F-PROT Gatekeeper only.\n
1073	F-PROT for Windows 95 already exists on hard disk.\nThis installation disk contains no F-PROT Gatekeeper.\n
1074	If you continue, you will have mixed versions of F-PROT and Gatekeeper installed.
1075	WARNING
1080	A previous error has prohibited the installation. Retry?
1081	There's no room on the target disk? You may try to add space by deleting some files on the disk.
1082	A file open error has occured during the installation. Retry?
1083	An error has occured during the installation. Retry?
1084	An unspecified error has occured during the installation. Retry?
1085	An output file open error has occured during installation. Retry?
1086	An input file open error has occured during installation. Retry?
1087	Fatal error: (Source library not compatible) has occured. Installation terminates.
1088	Fatal error: (Options specified were invalid.) has occured. Installation terminates.
1089	Out of memory? You can try to add memory by stopping some other programs.
1090	A non-existent drive was given. Retry?
1091	The path entered is not valid. Retry?
1092	Drive is open or a disk not present in the floppy drive. Retry?
1093	Groupname wasn't found in SETUP.INI. Installation terminates.
1094	Couldn't create program group 
1095	FileSet install failed.
1096	FileSet creation failed.
1097	Installing 
1100	Installation complete
1101	Internal error. Unable to create custom dialog.\nExiting installation program.
1102	Internal error. Unable to read information of compressed file. Installation terminates.
1103	Error while trying to enumerate the files of a package.
1104	Error = 
1105	Couldn't read font: 
1110	Modifying directories.
1112	Can't resolve the existence of Gatekeeper on the install disk. Installation terminates.
1113	Can't resolve the existence of F-PROT on the install disk. Installation terminates.
1114	Can't resolve between Network and Standalone installations. Installation terminates.
1115	Couldn't install DFAPPS.INI properly. Installation terminates.
1120	Install F-PROT for Windows 95 in Network Administration configuration. 
1121	This installation should be done only once by a system administrator when F-PROT for Windows 95 is being set up for the first time on the network.
1122	Install F-PROT for Windows 95 in Standalone Computer configuration.\n
1123	This installation should be done only once by users who wish to install F-PROT for Windows 95 on a single computer without network administration capabilities.
1124	Update your current F-PROT for Windows 95 configuration with new program files. 
1125	The program files of your earlier version of F-PROT for Windows 95 will be overwritten, but all the configuration settings will be retained.
1126	Abort F-PROT for Windows 95 installation.
1127	A new version of F-PROT Gatekeeper has been installed. However, the 32-bit virtual device driver for the new version can not be loaded immediately.
1128	\n\nYou should restart Windows 95 to load the device driver of the installed F-PROT Gatekeeper.
1129	Windows wasn't successfully re-started by F-PROT for Windows 95 Installation. You should restart Windows 95 to load the device driver of the installed F-PROT Gatekeeper.
1130	Install F-PROT for Windows 95 on your system for the first time.\n
1131	If you already have F-PROT for Windows 95 on your system, your current configuration will be overwritten.
1132	Update your current F-PROT for Windows 95 configuration with new program files. 
1133	The program files of F-PROT for Windows 95 will be overwritten, but all the configuration settings will be retained.
1134	Abort F-PROT for Windows 95 installation
1140	Error while exiting F-PROT for Windows 95 Installation.
1141	Verifying the space needed
1142	in the installation...
1143	&Continue
1150	This Setup package includes both F-PROT for Windows 95 and F-PROT Gatekeeper. Your previous installation contains only 
1151	F-PROT for Windows 95 which will be updated if you continue with the update installation.\nIn order to install the whole contents of the package you should press Cancel now and install the software with the first-time installation method.
1152	F-PROT Gatekeeper which will be updated if you continue with the update installation.\nIn order to install the whole contents of the package you should press Cancel now and install the software with the first-time installation method.
1160	MS Sans Serif
1161	8
1163	8
1180	Invalid Path
1181	Invalid Tag File
1182	Invalid Drive Specified
1183	Drive Open
1190	Path is invalid.
1191	Tag File on this diskette is invalid.
1192	Drive doesn't exist. \n\n Please enter a correct drive letter.
1193	Drive is open. Please close the door of the drive.
1200	Enter disk
1201	F-PROT Professional Setup
1202	Severe Error
1203	Warning
1204	Status
1224	This software can be run only under 
1225	Windows 95
1226	Exiting installation program.
1227	Exit
1240	F-PROT for Windows 95 Network Administration Installation
1241	F-PROT for Windows 95 Standalone Installation
1242	F-PROT for Windows 95 Update Installation
1250	Invalid number of parameters were given. Please refer the manual.
1251	The path given is invalid (not suitable for a path).
1252	Unidentified parameter.
1253	Install Gatekeeper for Autoinstall to directory:
1254	Remove InstallAutoinstFilesTo -key from SETUP.INI?
1255	Yes
1256	No
1260	Welcome to F-PROT for Windows 95 Installation
1261	Welcome to F-PROT for Windows 95 Installation
1262	The amount of physical memory in your current PC-configuration falls below the Gatekeeper installation memory limit defined in SETUP.INI.\n
1263	In order to install F-PROT Gatekeeper, select Exit now, remove the key GatekeeperMemoryMin= or lower the value of it, and re-start the installation.
1264	Please, insert F-PROT Professional for Windows 95 installation disk #2.
1265	No viruses found
1266	Abnormal termination
1267	Self check failed, program has bee modified
1268	Viruses found on disk
1269	Virus search string found in memory
1270	Scan terminated by user
1271	Virus(es) found and removed
1272	Out of memory
1273	Suspected infection found on disk
1275	Scan All Hard Disks
1276	Scan Network
1280	Please, specify the shared communication directory.
1281	Please, don't use national characters in path names.
1282	Can't create a target directory. Please, check the paths and your writing privileges.
1283	File(s) missing in the library.
1284	An internal error occured while installing files. Please, contact the local distributor of F-PROT Professional.
1285	Setup can't find source files due to incomplete packaging list.
1300	This is a 16-bit version of F-PROT Professional.
1301	There is F-PROT Professional for Windows 95 available, and it is included in the F-PROT for Windows licence.
1302	If the file transfer is interrupted now, your system may enter into an instabile state as a result. Resume?
1363	The communications path you gave couldn't be found neither it couldn't be created. Please check the path.
1372	Please insert disk 5