5121	Waiting for incoming call
5122	Answering incoming call
5123	Answered incoming call from system
5124	Calling system
5125	Called system
5126	Bit per second connection (port speed)
5127	Currently active sessions
5128	User bytes sent
5129	User bytes received
5130	User messages sent
5131	User messages received
5132	Retransmitted packets
5133	CRC errors detected
5134	Port errors detected
5135	Counts since the beginning of the current connection:
5136	Counts since the beginning of the last connection:
5137	Bit per second connection (carrier speed)
5138	auto.mdm
5139	XPC,%d,15,0,%s%s%s,%u,%lu,%u,%s%s%s
5140	XPC,%d,15,0,%s%s%s
5141	Off
5142	Low
5143	Medium
5144	High
5145	Receive from Modem:
5146	Send to Modem:
5147	bits per second
5148	Call has finished
5149	While answering the phone, the modem reported the error:
5150	X25 Receive:
5151	X25 Send:
5152	X25 Answer Error:
5155	ModemFileDirectory
5156	%04x %04x %04x %04x %04x %04x %04x %04x: %04x '%s'
5157	-- %u bytes of 0 --
5158	modems
5160	Modem command file variable is not recognized
5161	Modem command file variable repeated too many times
5162	Error opening the modem command file
5163	at line
5164	The operating system does not support speeds as high as
5165	Modem command file contains an illegal character sequence
5166	Insufficient memory - VPE Pool is full
5167	No channel assigned to port
5168	Insufficient memory - XPC pool is full
5169	Port not yet initialized
5170	Maximum port channel count exceeded
5171	Process has not properly acquired use of the port
5172	Window Size must be from 1 to 7
5173	Throughput Class must be from 3 to 12
5174	Invalid Hex digit entered
5175	Odd number of hex digits entered
5176	Error in Acquire or Connect Script; check the log file, Miscellaneous Events view, for further information.
5177	The selected modem command file only allows speeds as high as
5178	Port number must be from 0 to 15
5179	The port dialog manager is in use by another process
5180	Excessive Port or CRC errors experienced on the last connection.  Try enabling hardware flow control on the port, or reducing the Maximum Speed setting.
5181	Excessive retransmissions experienced on the last connection.  The remote end of the connection may have been experiencing port errors.
5182	X.PC memory has been exhausted
5183	Lost connection because of idle timer
5184	The XPC NTI transport driver was not found on the path.
5186	Connection established
5187	Connection lost
5188	Communications port unit number is not within valid range.
5190	Invalid arguments
5202	No additional information
5203	The parameter reference does not exist or has not been implemented in the PAD.
5204	The parameter reference is invalid or has not been implemented in the PAD.
5205	The parameter value cannot be altered from the current setting
5206	The parameter is read-only
5207	The parameter follows an invalid parameter separator
5208	Received PAD message contained less than eight bits
5209	Unrecognized message code in received PAD message
5210	Parameter field format of received PAD message was incorrect or incompatible with message code
5211	Received PAD message did not contain an integral number of octets
5212	Received parameter indication PAD message was unsolicited
5213	Received PAD message was too long
5214	Unauthorized reselection PAD message
5215	Received X.29 PAD error on physical port
5216	Reference
5217	X.29 PAD indication message on physical port
5218	Bad message code
5219	X.29: Unknown message received from PAD on physical port
5220	attributes
5221	MODELS
5222	DEFAULT SPEED
5223	MAXIMUM SPEED
5224	FIXED SPEED
5225	NULL MODEM
5226	PORT EMULATOR
5227	PORT VERSION
5228	PORT PARAMETER
5229	DISABLE DTR HANGUP
5230	COMMAND DELAY
5231	AUTO ANSWER
5232	NO COMMANDS
5233	CARRIER CONNECT
5234	RETRANSMISSION TIMER
5236	None
5237	Odd
5238	Even
5240	Call completed to
5241	Call received from
5242	Invalid X.3 PAD parameter value.
5250	commands
5251	ESCAPE
5252	ATTENTION
5253	INQUIRE
5254	SETUP
5255	RTS/CTS IGNORED
5256	RTS/CTS ENABLED
5257	VOLUME OFF
5258	VOLUME LOW
5259	VOLUME MEDIUM
5260	VOLUME HIGH
5261	MANUAL DIAL
5262	AUTO DIAL SETUP
5263	AUTO PULSE DIAL
5264	AUTO TONE DIAL
5265	AUTO DIAL SUFFIX
5266	ANSWER
5267	HANGUP
5268	CTS/DTR IGNORED
5269	CTS/DTR ENABLED
5280	responses
5281	OK
5282	RING
5283	CONNECT
5284	CARRIER
5285	BUSY
5286	NO DIALTONE
5287	NO ANSWER
5288	NO CARRIER
5289	ERROR
5290	INFORMATIONAL
5310	files
5320	X.25 driver not responding
5321	Unrecognized response from X.25 driver
5322	X.25 call cleared
5323	X.25 error, check Log file, Miscellaneous Events view
5324	Clearing X.25 call
5325	Error opening .VPC file
5326	Error reading .VPC file
5327	Invalid .VPC file in use
5328	Illegal character in .VPC file
5329	X.25 call cleared locally
5330	Remote X.25 circuit in use
5331	X.25 call failed, check log file, Miscellaneous Events view
5332	Save modem configuration file as:
5333	Save script file as:
5334	The file it too large to be editted
5335	The ATTRIBUTES section is missing from the command file
5336	The COMMANDS section is missing from the command file
5337	The RESPONSES section is missing from the command file
5338	- NONE -
5339	1200
5340	2400
5341	4800
5342	9600
5343	19200
5344	38400
5345	57600
5346	115200
5347	230400
5349	Lotus Notes ISDN Console
5350	Lotus Notes X.PC Console
5351	Lotus Notes X.25 Console
5352	Lotus Notes X.PC/TCP Console
5353	Created new modem database as %p
5354	Cannot create modem database. Please install MODEMS.NTF.
5355	Cannot find modem description for identifier: '%p'.  Please create/import/correct this description in the modem database.
5356	Cannot find specified modem description document in modem database.  Please reselect your modem type.
5357	Device is not functioning properly.  Please select another device or restart system.
5358	X.25 DCE
5360	Tone
5361	Pulse
5362	X.75 SLIP
5363	Transparent
5364	LAPD for D channel X.25
5365	PPP
5366	Transparent - no framing errors
5367	64Kbps with HDLC framing
5368	64kbps transparent with byte framing
5369	V.110 asynch with start/stop byte framing
5370	V.110 synch with HDLC framing
5371	64Kbps inverted with HDLC framing
5372	56Kbps transparent with byte framing
5373	Transparent
5374	T.90NL
5375	X.25 DTE to DTE
13056	X.PC Daemon
13057	Version 1.0
13058	Initializing X.PC daemon
13059	X.PC daemon shutdown
13060	Idle