1	The unused ports shown in bold type belong to hubs that can support the device.
2	The devices shown in bold type can be supported by the hub to which the under-powered device is connected.
3	The %s is connected to a hub that does not have enough power available to support it.
4	These are shown as bolded items in the tree representation below.
5	The hub does not have enough power available to operate the %s. \nFor assistance in solving this problem, click this message.
6	Disconnect the %s from its current port and switch it with one of the devices shown in bold type.
7	Disconnect the %s from its current port and then connect it to one of the unused ports shown in bold type.
8	The hub is self-powered.
9	The hub is bus powered.
10	The devices shown in bold type are attached to hubs that can support the device.
11	Disconnect the %s from its current port and switch it with one of the devices shown in bold type. Note that the switched device may not work correctly.
12	%d mA
13	Power Required
14	%d port(s) available
15	Total power available:  %d mA per port
16	Power required:  %d mA
17	The hub is not working properly.
18	My Computer
20	The %s is has been reconnected to a different hub that also does not have enough power available to support it.
21	Situation resolved: the %s is now connected to a hub that does have enough power available to support it.
30	The %s has malfunctioned and exceeded the power limits of its hub port. You should disconnect the device.
32	To reenable the port, disconnect the hardware and click Reset. If you click Close, the port will no longer function.
33	A USB device has malfunctioned and exceeded the power limits of its hub port. You should disconnect the device.
34	Power Surge On Hub Port
35	The port was not reset properly. If you wish to use the port, please reboot.
36	The %s has exceeded the power limits of its hub port. \nFor assistance in solving this problem, click this message.
37	A USB device has exceeded the power limits of its hub port. \nFor assistance in solving this problem, click this message.
40	One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
41	The location of the device is shown in bold type.
42	Try reconnecting the device. If Windows still does not recognize it, replace the device.
43	USB Device Not Recognized
44	One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.\nFor assistance in solving this problem, click this message.
50	The controller does not have enough bandwidth available for the %s, which has requested %d%% of the bus bandwidth.
51	The following list shows the bandwidth being consumed by devices on each of the installed controllers. To obtain updated bandwidth information, click Refresh.
52	The controller does not have enough bandwidth available for the %s. \nFor assistance in solving this problem, click this message.
53	Move this device to a controller that has more available bandwidth or, to free bandwidth, close the programs using the devices on the current controller. If the programs cannot be found, unplug one or more devices.
54	The table below shows you how much bandwidth each USB controller is using. Each USB controller has a fixed amount of bandwidth, which all attached devices must share.
56	The devices listed below are being used by programs and are consuming bandwidth. To obtain updated bandwidth information, click Refresh.
57	To free bandwidth, close the programs using these devices. If the programs cannot be found, unplug one or more devices.
58	Bandwidth Used
59	USB Controller Bandwidth Exceeded
60	Bandwidth currently in use:  %d%%
61	System reserved
71	Universal Serial Bus
72	Description
73	Controller
74	Device
75	USB Hub Power Exceeded
76	Universal Serial Bus Error
77	Unknown
78	Unused Port
79	Unknown USB Device
80	USB Hub
81	USB Host Controller
82	This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.\nFor a list of available ports, click here.
83	This device can perform faster
84	Your %s can perform faster if it is plugged into a hi-speed port
85	Situation resolved: the %s is now connected to a HI-SPEED USB hub.
87	The devices shown in bold type are non-HI-SPEED USB devices that can be supported by the hub to which the HI-SPEED USB device is connected.
88	Disconnect the %s from its current port and switch it with one of the devices shown in bold type.
89	The hubs shown in bold type have free ports that can support the HI-SPEED USB device.
90	Disconnect the %s from its current port and then connect it to one of the ports on a hub shown in bold type.
91	The unrecognized devices shown in bold type are attached to hubs that can support the HI-SPEED USB device.
92	Disconnect the %s from its current port and switch it with one of the devices shown in bold type. Note that the switched device may not work correctly.
93	There are no HI-SPEED USB host controllers installed on this computer.
94	The %s will function at reduced speed. You must add a HI-SPEED USB host controller to this computer to obtain maximum performance.
95	The hubs shown in bold type can support the HI-SPEED USB device.
96	Either add another HI-SPEED USB hub to the system, or switch the %s with one of the devices attached to a hub shown in bold.
97	HI-SPEED USB Hub
98	Unused Mini-Port
1100	Too many USB hubs have been chained together. A USB hub will not function if it is more than 5 hubs away from the root port.\nFor assistance in solving this problem, click this message.
1101	Maximum Hub Number Surpassed
1103	Too many USB hubs have been chained together. A USB hub will not function if it is more than 5 hubs away from the root port.
1104	Situation resolved: the %s is now connected to a hub that is close enough to the root.
1105	IDS_NESTED
1106	The hub's location is highlighted below. The devices shown in bold type can be switched with the hub.
1107	Disconnect the hub from its current location and switch it with one of the devices shown in bold type.
1108	The hub's location is highlighted below. Hubs with free ports are shown in bold type.
1109	Disconnect the %s from its current location and connect it to one of the hubs shown in bold type.
1110	The hub's location is highlighted below. The hubs shown in bold type are attached to hubs that can support the hub.
1111	Disconnect the highlighted hub from its current port and switch it with one of the hubs shown in bold type.
1112	The hub's location is highlighted below. The hubs shown in bold type have enough power for this hub.
1113	 (%d ports)
1114	Attached Devices
1116	BW Consumed
1117	Hub is operating at high-speed
1118	Hub is operating at full-speed
1119	Hub has multiple TTs
1120	Hub has a single TT
1121	Port Number %d
1200	USB settings
1201	Specify USB power settings for the USB hub driver
1202	USB selective suspend setting
1203	Specify whether USB selective suspend is turned on or off