1	
\nDiskPart was unable to mark the partition active.
\nMake sure the partition is valid.
\n
2	
\nThe selected disk is not a fixed basic MBR disk.
\nThe ACTIVE command can only be used on fixed basic MBR disks.
\n
3	
\nThere is no partition selected.
\nPlease select a partition and try again.
\n
4	
\nDiskPart marked the current partition as active.
\n
5	
\nDiskPart was unable to add a mirror to the volume.
\nPlease make sure the volume is valid for mirroring.
\n
6	
\nThe volume you have selected may not be mirrored.
\nPlease select a different volume to mirror.
\n
7	
\nThere is no disk specified to add as a mirror.
\nPlease specify a disk using the DISK=<N> parameter.
\n
8	
\nThe volume you selected is not dynamic.
\nPlease select a dynamic volume and try again.
\n
9	
\nThere is no volume selected to add the mirror.
\nSelect a simple dynamic volume and try again.
\n
10	
\nDiskPart succeeded in adding a mirror to the volume.
\n
11	
\nThe disk you have specified is too small for the volume.
\nPlease select a different disk for the mirror.
\n
12	disk
13	hH?
14	letter
15	mount
16	sS
17	/-
18	vV
19	
\nThe specified letter has already been assigned to this drive.
\n
20	
\nDiskPart could not assign the drive letter or mount point.
\nMake sure the drive letter or mount point is valid.
\n
21	
\nThe letter you specified is not a valid volume letter.
\n
22	
\nThe volume you specified is not valid, or does not exist.
\nUse the RESCAN command to refresh your information.
\n
23	
\nThere are no free drive letters to assign to this volume.
\nPlease free up a drive letter and try again.
\n
24	
\nDiskPart cannot reassign the drive letter on a system, boot or pagefile volume.
\n
25	
\nThere is no volume specified.
\nPlease select a volume and try again.
\n
26	
\nDiskPart assigned the drive letter, but your computer needs to be rebooted
\nbefore the changes take effect.
\n
27	
\nDiskPart successfully assigned the drive letter or mount point.
\n
28	
\nDiskPart failed to break the volume.
\nMake sure the volume is valid for breaking.
\n
29	
\nThe volume you have selected has a missing plex.
\nTo continue with the break use the NOKEEP parameter and try again.
\n
30	
\nThe disk specified is not valid to break the volume.
\nPlease specify a valid disk using the DISK=<N> parameter.
\n
31	
\nOnly dynamic volumes may be broken.
\nPlease select a dynamic mirror to break.
\n
32	
\nThere is no volume selected to break.
\nPlease select a dynamic mirror to break.
\n
33	
\nDiskPart successfully broke the mirror volume.
\n
34	
\nDiskPart succeeded in breaking the mirror, but was unable to locate resulting volumes.
\n
35	1394
36	IDE
37	SCSI
38	Unknown
39	USB
40	
\nDiskPart was unable to clean the disk.
\nThe data on this disk may be unrecoverable.
\n
41	
\nThe selected disk is neccessary to the operation of your computer, and may not be cleaned.
\n
42	
\nThere is no disk selected.
\nPlease select a disk and try again.
\n
43	
\nDiskPart succeeded in cleaning the disk.
\n
44	active
45	On computer: %s
\n
46	
\nThere is no disk selected to convert.
\nSelect a disk and try again.
\n
47	
\nThe selected disk is not a dynamic disk.
\nSelect a dynamic disk to convert to basic.
\n
48	
\nThe selected disk is not empty.
\nPlease make sure the disk is empty before converting to basic.
\n
49	
\nDiskPart successfully converted the selected disk to basic format.
\n
50	
\nThe selected disk cannot be upgraded to dynamic.
\nPlease select a valid basic disk to convert.
\n
51	
\nDiskPart successfully converted the selected disk to dynamic format.
\n
52	
\nYou must reboot your computer to complete this operation.
\n
53	
\nThe disk you specified cannot be converted to GPT.
\nPlease select an empty basic MBR disk to convert.
\n
54	
\nDiskPart successfully converted the selected disk to GPT format.
\n
55	
\nThe disk you specified cannot be converted to MBR.
\nPlease select an empty basic GPT disk to convert.
\n
56	
\nDiskPart successfully converted the selected disk to MBR format.
\n
57	Copyright (C) 1999-2007 Microsoft Corporation.
\n
58	
\nDiskPart was unable to create the specified partition.
\n
59	
\nThe specified disk is not valid.
\nPlease select a valid disk.
\n
60	
\nThere is no disk selected to create a partition.
\nSelect a disk and try again.
\n
61	
\nDiskPart succeeded in creating the specified partition.
\n
62	
\nThe partition was created successfully.
\nIt was automatically assigned a drive letter.
\n
63	
\nThe partition type you specified does not meet the format requirements.
\nType in an unsigned hexidecimal byte for MBR disks, or a GUID for GPT disks.
\n
64	
\nDiskPart was unable to create the specified volume.
\nPlease check your disks and parameters.
\n
65	
\nThere is no disk specified to create the volume.
\nPlease specify a disk using the DISK=<N> parameter.
\n
66	
\nDiskPart successfully created the volume.
\n
67	
\nDiskPart successfully created the volume, but was unable to select it.
\nMake sure the volume exists, and restart DiskPart if necessary.
\n
68	
\nThe volume you have specified is too big for the specified disk(s).
\n
69	
\nYou did not specify enough disks to create a RAID-5 set.
\nPlease specify at least 3 disks.
\n
70	
\nYou did not specify enough disks to create a stripe set.
\nPlease specify at least 2 disks.
\n
71	
\nThe disk you specified cannot be deleted.
\nPlease select an empty missing disk to delete.
\n
72	
\nThere is no disk selected to delete.
\nSelect a disk and try again.
\n
73	
\nDiskPart successfully deleted the missing disk.
\n
74	
\nThe partition you selected is invalid.
\nPlease select a different partition.
\n
75	
\nThere are no partitions selected.
\nPlease select a partition, and try again.
\n
76	
\nThe selected partition may be neccessary to the operation of your computer,
\nand may not be deleted.
\n
77	
\nDiskPart successfully deleted the selected partition.
\n
78	
\nDiskPart failed to delete the selected partition.
\nPlease make sure the selected partition is valid to delete.
\n
79	
\nDiskPart failed to delete the selected volume.
\nPlease make sure the selected volume is valid to delete.
\n
80	
\nThe volume you have selected is not valid.
\nPlease select a different volume to delete.
\n
81	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
82	
\nDiskPart cannot delete volumes on removable media.
\n
83	
\nThe selected volume is necessary to the operation of your computer.
\nYou may not delete this volume.
\n
84	
\nDiskPart successfully deleted the volume.
\n
85	
\n%s
\nDisk ID: %s
\nType   : %s
\nBus    : %d
\nTarget : %d
\nLUN ID : %d
\n
86	
\nThere is no disk selected to list details for.
\nPlease select a disk and try again.
\n
87	
\nPartition %lu
\nType    : %s
\nHidden  : %s
\nRequired: %s
\nAttrib  : %#.16I64x
\n
88	
\nPartition %lu
\nType  : %s
\nHidden: %s
\nActive: %s
\n
89	
\nThere is no disk selected.
\nPlease select a disk and try again.
\n
90	
\nThere is no partition selected.
\nPlease select a partition and try again.
\n
91	
\nThere is no volume associated with this partition.
\n
92	%2.2lX
93	
\nUnknown partition type.
\n
94	
\nThere are no disks attached to this volume.
\n
95	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
96	Errors
97	Foreign
98	Missing
99	Offline
100	Online
101	Unknown
102	Unreadable
103	Disk ID: 
104	
\nDiskPart was unable to process the parameters.
\nUse 'diskpart /?' for more information.
\n
105	
\nDiskPart encountered an error starting the COM services.
\n
106	
\nThat command could not be found in the command table.
\n
107	
\nDiskPart can only extend NTFS file systems.
\n
108	
\nDiskPart was unable to open or read the script file.
\nMake sure the file you specified exists.
\n
109	
\nDiskPart encountered an error starting the disk management services.
\n
110	
\nDiskPart has run out of memory, and could not complete the operation.
\n
111	
\nDiskPart encountered an error while registering for PnP notifications.
\n
112	
\nThe arguments you specified for this command are not valid.
\n
113	
\nThe disk management services could not complete the operation.
\n
114	
\nLeaving DiskPart...
\n
115	
\nDiskPart failed to extend the volume.
\nPlease make sure the volume is valid for extending.
\n
116	
\nYou may not extend OEM/ESP/System/Boot/Dismounted volumes.
\nThe volume you have selected may not be extended.
\nPlease select another volume and try again.
\n
117	
\nThere is no disk specified to extend the volume.
\nPlease specify a disk using the DISK=<N> parameter.
\n
119	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
120	
\nDiskPart successfully extended the volume.
\n
121	
\nThere is not enough usable free space on specified disk(s) to extend the
\nvolume.
\n
122	Mark the selected basic partition as active.
123	Add a mirror to a simple volume.
124	Assign a drive letter or mount point to the selected volume.
125	Break a mirror set.
126	Clear the configuration information, or all information, off the
\n              disk.
127	Display a list of commands.
128	Convert between different disk formats.
129	Convert a disk from dynamic to basic.
130	Convert a disk from basic to dynamic.
131	Convert a disk from MBR to GPT.
132	Convert a disk from GPT to MBR.
133	Create a volume or partition.
134	Create a partition.
135	Create a volume.
136	Delete an object.
137	Delete a missing disk from the disk list.
138	Delete the selected partition.
139	Delete the selected volume.
140	Provide details about an object.
141	Display the properties of the selected disk.
142	Display the properties of the selected partition.
143	Display the properties of the selected volume.
144	Create an EFI system partition.
145	Exit DiskPart.
146	Extend a volume.
147	Create an extended partition.
148	Import a disk group.
149	Display a list of objects.
150	Display a list of disks.
151	Display a list of partitions on the selected disk.
152	Display a list of volumes.
153	Create a logical drive.
154	Create a Microsoft Reserved partition.
155	Online a disk that is currently marked as offline.
156	Create a primary partition.
157	Create a software RAID-5 volume set.
158	Does nothing. This is used to comment scripts.
159	Remove a drive letter or mount point assignment.
160	Rescan the computer looking for disks and volumes.
161	Shift the focus to an object.
162	Shift the focus to a disk.
163	Shift the focus to a partition.
164	Shift the focus to a volume.
165	Create a simple volume.
166	Create a stripe volume set.
167	%-11.11s - %-.1009s
\n
168	
\nThere is no disk selected to import.
\nSelect a disk and try again.
\n
169	
\nDiskPart successfully imported the disk group.
\n
170	 
171	CD-ROM
172	DVD-ROM
173	Mirror
174	Partition
175	RAID-5
176	Removable
177	Simple
178	Spanned
179	Stripe
180	Unknown
181	*
182	
\n  Disk ###  Status      Size     Free     Dyn  Gpt
\n  --------  ----------  -------  -------  ---  ---
\n
183	%s Disk %-3lu  %-10.10s  %7s  %7s   %s    %s
\n
184	%s Disk M%-2lu  %-10.10s  %7s  %7s   %s    %s
\n
185	
\nThere are no fixed disks to show.
\n
186	
\n  Partition ###  Type              Size     Offset
\n  -------------  ----------------  -------  -------
\n
187	%s Partition %-3.3s  %-16.16s  %-7.7s  %-7.7s
\n
188	
\nThere is no disk selected to list partitions.
\nSelect a disk and try again.
\n
189	
\nThere are no partitions on this disk to show.
\n
190	Dynamic Data
191	Dynamic Reserved
192	Extended
193	Free
194	Logical
195	OEM
196	Primary
197	Reserved
198	System
199	Unknown
200	Unused
201	
\n  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
\n  ----------  ---  -----------  -----  ----------  -------  ---------  --------
\n
202	At Risk
203	Boot
204	Crashdmp
205	Pagefile
206	System
207	%1.1s Volume %-3ld   %c   %-11.11s  %-5.5s  %-10.10s  %-7.7s  %-9.9s  %-8.8s
\n
208	    (%lu)%s
\n
209	    %c:%s
\n
210	
\nThere are no volumes.
\n
211	Failed
212	Failed Rd
213	Healthy
214	
\n
215	No
216	
\nDiskPart could not online the selected disk.
\n
217	
\nDiskPart successfully onlined the selected disk.
\n
218	
\nNo objects were selected to online.
\nPlease select a disk or pack and try again.
\n
219	
\nDiskPart could not online the selected volume.
\n
220	
\nDiskPart successfully onlined the selected volume.
\n
221	ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789`~!@#$%^&*()-_+[]{}':;/?,.><\|
222	;
223	
224	
\n
225	0123456789
226	"'
227	Unknown
228	%5I64d B
229	%%4I64d %cB
230	-KMGTP?
231	
\nDISKPART> 
232	
\nDiskPart could not remove the drive letter or mount point.
\nMake sure the drive letter or mount point is valid.
\n
233	
\nThe volume you specified is not valid, or does not exist.
\nUse the RESCAN command to refresh your information.
\n
234	
\nThe selected volume has no letter or mount point to remove.
\n
235	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
236	
\nDiskPart successfully removed the drive letter, but your computer needs to be
\nrebooted before the changes take effect.
\n
237	
\nDiskPart successfully removed the drive letter or mount point.
\n
238	
\nThe letter you specified is not assigned to that volume.
\n
239	
\nThe specified mount point is not assigned to that volume.
\n
240	
\nDiskPart has finished scanning your configuration.
\n
241	mM
242	
\nDisk %lu is now the selected disk.
\n
243	
\nDisk M%lu is now the selected disk.
\n
244	
\nThe disk you specified is not valid.
\n
245	
\nThere is no disk selected.
\n
246	
\nPartition %lu is now the selected partition.
\n
247	
\nThe specified partition is not valid.
\nPlease select a valid partition.
\n
248	
\nThere is no disk selected to set the partition.
\nSelect a disk and try again.
\n
249	
\nThere is no partition selected.
\n
250	
\nVolume %lu is the selected volume.
\n
251	
\nThe volume you selected is not valid or does not exist.
\n
252	
\nThere is no volume selected.
\n
253	
\nMicrosoft DiskPart syntax:
\n	diskpart [/s <script>] [/?]
\n
\n	/s <script> - Use a DiskPart script.
\n	/?          - Show this help screen.
\n
254	
\nDiskPart is running in verbose mode.
\n
255	DiskPart is starting the COM services.
\n
256	DiskPart is stopping the COM services.
\n
257	DiskPart is starting the disk management services.
\n
258	DiskPart is stopping the disk management services.
\n
259	DiskPart is registering for PnP notifications.
\n
260	DiskPart is unregistering for PnP notifications.
\n
261	DiskPart is using script mode.
\n
262	DiskPart is closing the script file.
\n
263	DiskPart is using standard input mode.
\n
264	
\nMicrosoft DiskPart version %hs.%d
\n
265	At Risk
266	Boot
267	Crashdmp
268	Pagefile
269	System
270	Failed
271	Failed Rd
272	Online
273	Unknown
274	
\nPlease wait while DiskPart scans your configuration...
\n
275	.
276	Yes
277	
\nThe command you selected is not available with this version of Windows.
\n
278	Place a retained partition under a simple volume.
279	
\nDiskPart cannot create a partition under the selected volume.
\n
280	
\nThe selected volume now has a partition associated with it.
\n
281	
\nOne of the objects you are trying to edit has changed recently.
\nPlease use the RESCAN command to scan your configuration for new information.
\n
282	ATAPI
283	ATA
284	SSA
285	FIBRE
286	RAID
287	Not Ready
288	No Media
289	%s Disk %-3lu  %-10.10s  %7s  %7s   %s    %s   Pack %-3ld
\n
290	
\n  Plex ###  Type     Attrib  Status     Member ###  Disk ###  Status     Dyn  Gpt  Extent 
\n  --------  -------  ------  ---------  ----------  --------  ---------  ---  ---  -------
\n
291	  Plex %-3lu  %-7.7s  %-6.6s  %-9.9s
\n
292	                                        Member %-3lu
\n
293	                                                    Disk %-3lu  %-9.9s   %s    %s   %7s
\n
295	
\nThe selected volume does not belong to any pack.
\n
296	Display a list of packs.
297	Display a list of providers.
298	Shift the focus to a pack.
299	Merge a pack with the selected pack.
300	Move one or more disks from an online disk pack to a new offline
\n              pack.
301	Reduce the size of the selected volume.
302	Display the properties of the selected pack.
303	
\n  Pack ###  Name                       Status   Info                  
\n  --------  -------------------------  -------  ----------------------
\n
304	%s Pack %-3lu  %-25.25s  %-7.7s  %-22.22s
\n
305	Unknown
306	Online
307	Offline
308	Foreign
309	No Quorum
311	
\nThere are no packs.
\n
312	
\nThere is no pack selected.
\nPlease select a pack and try again.
\n
313	
\nThere are no disks attached to this pack.
\n
314	
\nThere are no volumes attached to this pack.
\n
315	
\nPack %lu is now the selected pack.
\n
316	
\nThe pack you specified is not valid.
\n
317	
\nThere is no selected pack.
\n
318	
\nCannot delete a non-empty extended partition.
\n
319	
\nThe maximum number of partitions has already been reached.
\n
320	Simple
321	Spanned
322	Stripe
323	Unknown
324	RAID-5
325	
\n  Provider ###  Name                                             Version
\n  ------------  -----------------------------------------------  ----------
\n
326	%s Provider %-3lu  %-48.48s %-14.14s
\n
327	
\nCannot find the specifed volume.
\nPlease make sure the specified volume exists.
\n
328	
\nThere is no volume in focus.
\nSelect a volume and try again.
\n
329	
\nThere is no size specified.
\nSpecify a size and try again.
\n
330	
\nDiskPart successfully shrunk the volume by: 
331	
\nThere is no pack with focus to merge into.
\nPlease select a pack and try again.
\n
332	
\nCould not find specified pack number.
\nPlease specify another pack using the PACK=<N> parameter.
\n
333	
\nDiskPart merged packs successfully, but your computer needs to be rebooted for
\nthe changes to take effect.
\n
334	
\nDiskPart merged packs successfully.
\n
335	
\nThe specified pack is the same as the in-foucs pack.
\nCannot merge a pack into itself.
\n
336	
\nThere is no pack in focus.
\nSelect a pack and try again.
\n
337	
\nThere are no disks specified to split.
\nSpecify disks with DISK=<N>[,<N>[,...]] and try again.
\n
338	
\nDiskPart successfully split the pack, but your computer needs to be rebooted
\nbefore the changes take effect.
\n
339	
\nDiskPart sucessfully split the pack.
\n
340	
\nSelected disk is already a dynamic disk.
\n
341	
\nThe disk you specified is not empty.
\nPlease select an empty GPT disk to convert.
\n
342	
\nThe disk you specified is not GPT formatted.
\nPlease select an empty GPT disk to convert.
\n
343	
\nThe disk you specified is not empty.
\nPlease select an empty MBR disk to convert.
\n
344	
\nThe disk you specified is not MBR formatted.
\nPlease select an empty MBR disk to convert.
\n
345	
\nDiskPart brought the selected pack online.
\n
346	
\nThe disk is not a fixed basic MBR disk.
\nThe INACTIVE command can only be used on fixed basic MBR disks.
\n
347	
\nDiskPart was unable to mark the partition inactive.
\nMake sure the partition is valid.
\n
348	
\nThe current partition is already marked inactive.
\n
349	
\nDiskPart marked the current partition as inactive.
\n
350	
\nThere is no partition selected.
\nPlease select a partition and try again.
\n
351	Mark the selected basic partition as inactive.
352	
\nDiskPart encountered an error while onlining the objects in the pack associated
\nwith the selected disk.
\n
353	
\nDiskPart successfully onlined the selected disk's pack.
\n
354	
\nThe selected pack has no quorum.
\nOnlining of the pack may result in lost data.
\nIf you still want to continue, try again with OVERRIDE parameter.
\n
355	
\nDiskPart successfully onlined the selected pack, but your computer needs to be
\nrebooted for the changes to take effect.
\n
356	                                                    Disk M%-2lu  %-9.9s   %s    %s   %7s
\n
357	Healthy
360	Display the properties of the selected provider.
361	Shift the focus to a provider.
362	Repair a RAID-5 volume with a failed member.
363	%s Disk M%-2lu  %-10.10s  %7s  %7s   %s    %s   Pack %-3ld
\n
364	
\n  Disk ###  Status      Size     Free     Dyn  Gpt  Pack ###
\n  --------  ----------  -------  -------  ---  ---  --------
\n
365	
\nMicrosoft DiskPart version %hs.%d
\n
366	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
367	
\nDiskPart successfully repaired the selected volume.
\n
368	
\nThere is not enough free space on the specified disks to hold the failed volume
\nmember.
\n
369	
\nDiskPart failed in repairing the selected volume.
\n
370	Assign attributes to the selected GPT partition.
371	
\nThere is no partition selected.
\nPlease select a partition and try again.
\n
372	
\nThe selected partition is not a GPT partition.
\nPlease select a valid GPT parition and try again.
\n
373	
\nDiskPart successfully assigned the attributes to the selected GPT partition.
\n
374	
\nDiskPart failed to assign atttributes to the selected GPT partition.
\n
375	
\nDiskPart cannot assign a drive letter to a partition.
\nPlease select a volume and try again.
\n
376	
\nThe partition you specified is not an OEM or ESP partition.
\nPlease select an OEM or ESP partition and try again.
\n
377	
\nDiskPart cannot assign a mount point to an OEM or ESP partition.
\nPlease select a drive letter and try again.
\n
378	Rebuild
379	
\nThe disk you specified is already part of this volume.
\nPlease specify a new disk for the RAID-5 column.
\nIf attempting to repair to the original failed disk, use ONLINE instead.
\n
380	
\nA disk specified is not dynamic.
\nPlease specify a dynamic disk and try again.
\n
381	
\nThe disk you selected is not dynamic.
\nPlease select a dynamic disk and try again.
\n
382	
\nThe specified disks have less than 1 MB of free space available.
\nPlease specify a disk with at least 1 MB available free space.
\n
383	This version of DiskPart is not supported on this platform.
\n
384	
\nCannot extend a basic volume to a different disk.
\nPlease use extend without specifying a disk.
\n
385	
\nYou have mirrored your current boot volume to an MBR disk.
\nYou will not be able to boot from the plex on the MBR disk.
\n
386	
\nThe selected volume is necessary to the operation of your computer.
\nYou may not remove the drive letter from this volume.
\n
387	
\nAutomatic mounting of new volumes enabled.
\n
388	
\nAutomatic mounting of new volumes disabled.
\n
389	
\nDiskPart successfully scrubbed the mount point settings in the system.
\n
390	Enable and disable automatic mounting of basic volumes.
391	
\nDiskPart successfully dismounted the volume.
\n
392	
\nThe selected volume has remaining drive letters or mount points.
\nRemove all drive letters and mount points and try again.
\n
393	
\nThe specified volume cannot not be dismounted.
\nPlease specify another volume and try again.
\n
395	
\nDiskPart cannot mirror the current boot volume on another disk with a different
\npartition style.
\n
396	
\nThe selected partition is in use.
\nTo continue with the delete use the OVERRIDE parameter.
\n
397	
\nThe selected volume is in use.
\nTo continue with the delete use the OVERRIDE parameter.
\n
398	Dismounted             : %s
\n
399	
\nWaiting for the mirror to be synchronized...
\n
400	
\nThe provider you selected is not valid or does not exist.
\n
401	
\nProvider %u is the selected provider.
\n
402	
\nThere is no provider selected.
\n
403	 %luB;
404	 %luKB;
405	 %luMB;
406	 %luTB;
407	
\nThere is no provider selected.
\nPlease select a provider and try again.
\n
408	
\nIdentifier  : %s
\nVersion     : %s
\nStripe Sizes:
409	
\nCapabilities:
410	 One Disk Only Per Pack
411	 One Pack Online Only
412	 Dynamic Provider
414	 Dynamic Disks Supported
415	 Fault Tolerant Supported
417	
\n             %s
418	Corrupted
419	Failed
420	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
421	
\nDiskPart successfully formatted the volume.
\n
422	  %3lu percent completed

423	
\nThe format has been initiated successfully and is currently in progress.
\nPlease wait until format has completed before trying to access the volume.
\n
424	
\nOnly NTFS, FAT32 and FAT are supported.
\nPlease specify another file system and try again.
\n
425	
\nNTFS compression is not supported for allocation unit sizes above 4096.
\nPlease select a smaller allocation unit size and try again.
\n
426	
\nDynamic volumes only support the NTFS file system.
\nPlease specify NTFS as the file system type and try again.
\n
427	
\nAllocation Unit size must be power of 2.
\n
428	
\nThe selected volume cannot be formatted.
\nPlease select another volume and try again
\n
429	
\nNTFS is not supported for the selected volume.
\nPlease select a different file system type and try again
\n
430	
\nFAT32 is not supported for the selected volume.
\nPlease select a different file system type and try again
\n
431	
\nFAT is not supported for the selected volume.
\nPlease select a different file system type and try again
\n
432	
\nYou cannot format a system volume.
\n
433	
\nYou cannot format a boot volume.
\n
434	
\nThe default file system type is NTFS.
\n
435	Format the volume or partition.
436	Change the partition type.
437	
\nThe selected disk does not belong to any pack.
\n
438	
\nThe remove size is not valid.
\nFor MBR disks the remove size should be at least 1 cylinder
\n
439	Invalid
440	
\nThis command only applies to a RAID-5 volume with a failed member.
\nThe selected volume does not need to be repaired.
\n
441	
\nThe volume selected is not a mirror.
\nPlease select a mirror and try again.
\n
442	
\nThe selected volume has more than one mount point and/or drive letter.
\nUse the REMOVE ALL DISMOUNT command to remove all the mount points and dismount
\nthe volume.
\n
450	
\nDiskPart has referenced an object which is not up-to-date.
\nRefresh the object by using the RESCAN command.
\nIf the problem persists exit DiskPart, then restart DiskPart or restart the
\ncomputer.
\n
451	
\nDiskPart encountered an unrecoverable error.
\nExit DiskPart, then restart DiskPart or restart the computer.
\n
452	
\nDiskPart encountered an unexpected error.
\nCheck the system event log for more information on the failure.
\n
453	
\nThe limit for dynamic disk configuration information has been reached.
\nDynamic disks and volumes cannot be configured.
\nTo continue configuring dynamic disks, remove some existing dynamic volumes or
\ndisks and try again.
\n
454	
\nThe specified command or parameters are not supported on this system.
\n
455	
\nDiskPart failed to update the boot configuration data.
\nUse bcdedit.exe to update it manually.
\n
460	
\nThe volume selected is currently rebuilding.
\n
461	
\nThe disk specified does not contain the volume.
\n
462	
\nThe disk specified belongs to the current boot plex of the mirrored volume and
\ncannot be broken from the mirror.
\n
465	
\nDiskPart cannot extend a dismounted volume.
\nMount the volume using the ASSIGN command and try again.
\n
467	
\nDiskPart cannot extend the selected volume because it is offline.
\nUse the ONLINE command to attempt to online to volume, then try again.
\n
468	
\nDiskPart cannot extend the seelcted volume because its status is not healthy.
\nUse the ONLINE command to attempt to repair the volume, then try again.
\n
469	
\nDiskPart cannot extend the selected volume onto any additional disks because
\nthe volume already spans the maximum number of disks.
\n
470	
\nDiskPart successfully extended the volume but failed to extend the file system.
\nTo retry this operation use the DiskPart command EXTEND FILESYSTEM.
\n
471	
\nDiskPart failed to extend the file system on the volume.
\n
472	
\nDiskPart successfully extended the file system on the volume.
\n
475	
\nThe selected disk cannot be converted to dynamic because it is a shared disk in
\na cluster.
\n
476	
\nThe selected disk cannot be converted to dynamic because there is not enough
\nfree space on the disk.
\nFree some space on the disk and try again.
\n
480	
\nThe selected disk cannot be converted to GPT because it is a shared disk in a
\ncluster.
\n
485	
\nThe selected disk is not a foreign disk and does not need to be imported.
\n
490	
\nThe specified missing disk cannot be deleted because it contains volume
\nextents.
\nRemove the volume extents from the disk by breaking or deleting the volumes,
\nthen try again.
\nTo force the delete of the missing disk with volumes use the OVERRIDE
\nparameter.
\n
495	
\nDiskPart is unable to create the specified partition because the specified size
\nis less than the minimum size.
\nSpecify a larger size and try again.
\n
496	
\nThere is insufficient free space to create a partition at the specified size
\nand offset.
\nSpecify different size and offset values or don't specify either to create the
\nmaximum sized partition.
\n
497	
\nLogical and extended partitions cannot be created on a GPT disk.
\nInstead create primary partitions on a GPT disk.
\n
498	
\nMSR and EFI partitions are only supported on GPT disks.
\nConvert the selected disk to GPT and try again.
\n
499	
\nPartitions cannot be created on a dynamic disks.
\nInstead use the CREATE VOLUME command to create volumes on a dynamic disk.
\n
500	
\nThe specified alignment is not sector size aligned.
\nSpecify an alignemnt which is sector size aligned and try again.
\n
501	
\nThe specified alignment is beyond the first cylinder.
\nSpecify an alignment less than the first cylinder and try again.
\n
502	
\nAn extended partition cannot be created within another extended partition.
\nInstead use the CREATE PARTITION LOGICAL command to create additional logical
\ndrives within the extended partition.
\n
503	
\nThere is currently no extended partition to create the logical drive in.
\nCreate an extended partition then try again.
\n
505	
\nThe selected partition is a protected partition and may be necessary to the
\noperation of your computer.
\nIf you are sure you want to delete the partition use the OVERRIDE parameter.
\n
510	
\nThe selected partition is not a data partition.
\nOnly data partitions can be marked active or inactive.
\n
511	
\nThe selected partition cannot be marked as an active partition because of its
\ntype.
\n
515	
\nDiskPart cannot assign a mount point to a hidden volume.
\nSelect a drive letter to assign to the volume and try again.
\n
516	
\nThe specified drive letter is already in use.
\nSelect another drive letter that is free and try again.
\n
520	
\nThe selected volume cannot be formatted because its status is failed.
\nUse the ONLINE command to attempt to repair the volume, then try again.
\n
525	
\nThe same disk was specified more than once.
\nSpecify a different disk and try again.
\n
526	
\nDiskPart failed to set volume attributes.
\n
527	
\nVolume attributes set successfully.
\n
528	
\nDiskPart failed to clear volume attributes.
\n
529	
\nVolume attributes cleared successfully.
\n
530	Read-only              : %s
\n
531	Hidden                 : %s
\n
532	No Default Drive Letter: %s
\n
533	Shadow Copy            : %s
\n
534	Manipulate volume attributes.
535	iSCSI
536	SATA
537	SAS
538	
\nDiskPart cannot create partitions beyond the 2TB mark on large MBR disks.
\nConvert the disk to the GPT partitioning style in order to use its full
\ncapacity.
\n
539	
\nDiskPart cannot extend partitions beyond the 2TB mark on large MBR disks.
\nConvert the disk to the GPT partitioning style in order to use its full
\ncapacity.
\n
540	
\nDiskPart cannot convert MBR disks larger than 2TB to dynamic.
\nConvert the disk to the GPT partitioning style in order to enable the
\nconversion to dynamic.
\n
541	
\nYou have mirrored your current boot volume to a GPT disk.
\nYou will not be able to boot from the plex on the GPT disk.
\n
542	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
543	
\nThe selected dynamic volume cannot be retained because it is not cylinder
\naligned.
\nFor more information on this command type: HELP RETAIN
\n
544	
\nDiskPart cannot online the selected disk because it is missing.
\n
545	
\nDiskPart mirrored the selected volume however the mirrored volume failed to 
\nsynchronize.
\nTo retry the synchronization use the ONLINE command on the volume.
\n
546	
\nThe selected volume cannot be formatted because it is unmounted.
\nTo mount the volume use the ASSIGN command to assign a drive letter to the
\nvolume.
\n
547	
\nThe selected volume cannot be extended because the filesytem on the volume does
\nnot support extending.
\nFor more information type: HELP EXTEND.
\n
548	
\nDiskPart cannot change the type for Microsoft reserved partitions or dynamic
\ndata partitions.
\nSelect another partition and try again.
\n
549	
\nThe specified type is reserved for Microsoft reserved partitions or dynamic
\ndata partitions.
\nSpecify another type and try again.
\n
550	
\nThe selected partition is currently in use.
\nTo force the changing of the type use the OVERRIDE parameter.
\n
551	
\nThe specified type is not in the correct format.
\nFor more information on the command type: HELP SET
\n
552	
\nDiskPart successfully set the partition ID.
\n
553	
\nDiskPart cannot create the partition because the selected removeable disk
\nalready has a partition present.
\nOn removable disks, DiskPart only supports the creation of a single partition
\ncovering the entire disk.
\n
554	
\nDiskPart cannot create the partition because the size specified is less than
\nthe size of the entire disk.
\nDiskPart only supports the creation of partitions that cover an entire
\nremovable disk.
\nTry the command again without specifying a size and DiskPart will automatically
\nsize the partition to cover the entire disk.
\n
555	No Media
557	Unusable
558	Volume Capacity        : %s
\n
559	Volume Free Space      : %s
\n
560	
\n
561	DiskPart has encountered an error: 
562	See the System Event Log for more information.
\n
563	Virtual Disk Service error:
\n
564	
\nThe specified shrink size is too large.
\n
565	
\nA defragmentation or volume shrink operation is already in progress.
\nOnly one of these operations can run at a time.
\nWait until the current process finishes and then try again.
\n
566	
\nThe maximum number of reclaimable bytes is: 
567	
\nShrink is not supported on the selected volume.
\n
568	
\nDiskPart cannot shrink a dismounted volume.
\nMount the volume using the ASSIGN command and try again.
\n
569	Call to Application Restart failed.
\n Application will not automatically restart after a hang or crash.
\n
570	
\nAn error was encountered while acquiring information for volume:
\n%s.
\nDiskPart may not be able to list all information for this object.
\n
571	
\nThe selected volume or partition is in use.
\nTo continue with the operation use the OVERRIDE parameter.
\n
572	BitLocker Encrypted    : %s
\n
573	
\nBitLocker encryption and the encrypted data on the volume will be removed.
\nYou may enable BitLocker again after formatting is complete.
\n
574	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
575	Hidden
576	Display current and supported file systems on the volume.
577	
\nThere is no volume selected.
\nPlease select a volume and try again.
\n
578	
\nCurrent File System
\n
579	
\nFile Systems Supported for Formatting
\n
580	  Type                 : %s
\n
581	  Allocation Unit Size : %s
\n
582	  Allocation Unit Sizes: %s
\n
584	 (Default)
585	 (Recommended)
586	, 
587	
\n  No file systems are supported for formatting.
\n
588	%u
589	%uK
590	%X.%X%X
591	%X%X.%X%X
593	
\nThere are no disks specified to split.
\nSpecify disks with DISK=<N>[,<N>[,...]] and try again.
\n
594	
\nDiskPart successfully split the disks, but your computer needs to be rebooted
\nbefore the changes take effect.
\n
595	
\nDiskPart sucessfully split the disks.
\n
596	
\nDiskPart is not able to shrink the volume since the volume is in an
\ninconsistent state.
\nPlease run chkdsk on this volume first.
\n
608	
\nDiskPart failed to clear disk attributes.
\n
609	
\nDisk attributes cleared successfully.
\n
610	Read-only  : %s
\n
611	Boot Disk  : %s
\n
612	Manipulate disk attributes.
613	Manipulate volume attributes.
614	Display or set the SAN policy for the currently booted OS.
615	Import Failed
616	
\nDiskPart successfully changed the SAN policy for the current operating system.
\n
617	Online All
618	Offline Shared
619	Offline All
620	Unknown
621	
\nSAN Policy  : %s
\n
622	
\nThe selected disk is the boot disk and may not be taken offline.
\n
623	
\nThe selected disk is the system disk and may not be taken offline.
\n
625	Pagefile Disk  : %s
\n
626	Hibernation File Disk  : %s
\n
627	Crashdump Disk  : %s
\n
628	Displays or sets the GUID partition table (GPT) identifier or 
\n              master boot record (MBR) signature of a disk.
629	
\nNo disk was selected.
\nPlrease move the focus to a disk and try again.
\n
630	
\nDisk ID: %s
\n
631	
\nThe specified identifier is not in the correct format.
\nType the identifier in the correct format:
\nin hexadecimal form for an MBR disk or as a GUID for a GPT disk.
\n
632	
\nThe disk selected is not a GUID partition table (GPT) or master boot record (MBR) disk.
\nPlease move the focus to a GPT or MBR disk.
\n
633	
\nDiskPart cannot offline the selected disk because it is missing.
\n
634	
\nNo disk was selected to offline.
\nPlease select a disk and try again.
\n
635	
\nDiskPart encountered an error while offlining the disk.
\n
636	
\nDiskPart successfully offlined the selected disk.
\n
637	Unavailable
638	Not Supported
639	Reserved
640	Offline an object that is currently marked as online.
641	
\nThere is no disk selected.
\nPlease select a disk and try again.
\n
642	
\nDiskPart failed to set disk attributes.
\n
643	
\nDisk attributes set successfully.
\n
644	
\nA supported file system was not specified.
\nPlease specify another file system and try again.
\nUse the FILESYSTEMS command to retrieve a list of supported file systems.
\n
645	Online an object that is currently marked as offline.
646	
\nNo disk was selected to online.
\nPlease select a disk and try again.
\n
647	
\nDiskPart could not online the selected volume.
\n
648	
\nDiskPart successfully onlined the selected volume.
\n
649	Manipulate volume or disk attributes.
650	
\nThe volume you selected to format is encrypted with BitLocker Drive Encryption.
\nBitLocker encryption will be removed and the encrypted data on the volume will be erased.
\nYou may enable BitLocker again after formatting is complete.
\nTo proceed with the format, run FORMAT again using the OVERRIDE parameter.
\n
651	
\nThe volume you selected to delete has been encrypted with BitLocker Drive Encryption.
\nIf you delete the volume, all data will be lost.
\nTo proceed with the deletion, run DELETE again using the OVERRIDE parameter.
\n
652	
\nThe partition you selected to delete contains a volume that has been encrypted with BitLocker Drive Encryption.
\nIf you delete the partition, all data in the volume will be lost.
\nTo proceed with the deletion, run DELETE again using the OVERRIDE parameter.
\n
853	 [Revision %s]
1100	
\nNo objects were selected to recover.
\nPlease select a disk and try again.
\n
1102	Refreshes the state of all disks in the selected pack.
\n              Attempts recovery on disks in the invalid pack, and
\n              resynchronizes mirrored volumes and RAID5 volumes
\n              that have stale plex or parity data.
1103	
\nDiskPart encountered an error.
\n
1104	
\nThe RECOVER command completed successfully.
\n
1105	Online a disk that is currently marked as offline.
1106	Offline a disk that is currently marked as online.
1107	
\nNo volume was selected to offline.
\nPlease select a volume and try again.
\n
1108	
\nDiskPart successfully offlined the selected volume.
\n
1111	
\nDiskPart could not offline the selected volume.
\n
1112	
\nNo volume was selected to online.
\nPlease select a volume and try again.
\n
1113	Online a volume that is currently marked as offline.
1114	Offline a volume that is currently marked as online.