101	Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start.
102	Administrator
103	Any Application
104	QC Trusted User
105	Reader
106	Server Application
107	BUILTIN
108	Activator
111	Upgrading COM+ (%1 of %2 applications)
114	Members of this role are allowed to activate components in this partition.
188	STATUS [%3]: Exporting application '%1' to '%2' \n
190	ERROR  [%4]: An error occurred copying files to '%3'\n        while exporting application '%2' . The error code was %1.\n        Make sure all the component files in this application are accessible.\n
191	ERROR  [%3]: An unexpected error occurred exporting application  '%2'.  The error code was %1.\n
193	ERROR  [%2]: An error occurred creating a share to '%3'.  Make sure the folder is not open in another application, including the Windows Explorer.\n       The error code was %1.  Check the Event Viewer on that computer for further messages.\n
194	ERROR  [%2] : An error occurred accessing the COM+ System application on this computer.\n        COM+ may not be installed correctly.   The error code was %1.\n        There may be further messages in the Event Viewer on this computer or on your local computer.\n
196	STATUS [%1]: Preparing to replicate from source computer.\n
197	COM REPLICATION LOG %1\n\n
200	ERROR  [%2]: An error occurred copying exported application files from the source to the target.\n       The error code was %1.  Make sure the target folder mentioned in the previous status message is not open in another process,\n       including the Windows Explorer.\n
201	STATUS [%1]: Preparing to replicate to target computer.\n
202	STATUS [%2]: Installing application from '%1'.\n
203	ERROR  [%3] : An unexpected error occurred installing application from '%2'.  The error code was %1.\n
204	STATUS [%1]: Removing the computer list.\n
205	STATUS [%2]: Copying computer list from '%1'.\n
206	STATUS [%2]: Copying local computer properties from '%1'.\n
207	STATUS [%2]: Deleting application '%1' on target computer.\n
209	STATUS [%2]: Copying all exported application files from the source computer to '%1' on the target.\n
211	STATUS [%1]: Removing old replica files in '%2'.\n
212	ERROR  [%2]: An error occurred removing and renaming replica folders. The error code was %1.\n       Make sure that none of the folders mentioned in the 3 previous status messages is open in another application,\n       including the Windows Explorer.  Check the Event Viewer on that computer for further messages.\n
213	ERROR  [%3]: An error occurred removing the temporary network share '%2'.  The error code was %1.  Check the Event Viewer on that computer for further messages.\n
216	ERROR  [%3]: An error occurred will examining '%2' for applications to install.\n        The error code was %1.  Make sure this folder is not open in another application, including the Windows explorer."\n
217	        Make sure the folder is not open in another application, including the Windows Explorer.\n
218	ERROR : The COM version on '%1' is not compatible with the version on your local computer.\n
219	STATUS [%1]: Renaming '%2' to '%3'.\n
220	ERROR  [%3]: An error occurred creating or emptying the folder '%1'.\n       Make sure the folder is not open in another application, including the Windows Explorer.\n       The error code was %2.  Check the Event Viewer on that computer for further messages.\n
221	ERROR  [%1]: An unexpected error occurred replicating the identity for the\n       application '%2' with ID '%3'.\n       The identity of the application may not be a valid account on the\n       target computer.  The application has been disabled.  (The error code\n       was %4.)\n
222	ERROR  [%2] : An unexpected error occurred accessing computer properties.  The error code was %1.\n        Additional debugging information: '%3'.\n
223	ERROR  [%2] : An unexpected error occurred accessing the computer list.  The error code was %1.\n        Additional debugging information: '%3'.\n
224	ERROR  [%2] : An unexpected error occurred deleting applications.  The error code was %1.\n        Additional debugging information: '%3'.\n
225	ERROR  [%2] : An unexpected error occurred clearing the computer list.  The error code was %1.\n        Additional debugging information: '%3'.\n
226	ERROR  [%2] : An unexpected error occurred accessing the catalog.  The error code was %1.\n        Additional debugging information: '%3'.\n
228	ERROR  [%2] : An unexpected error occurred deleting partitions.  The error code was %1.\n        Additional debugging information: '%3'.\n
230	STATUS [%2]: Deleting partition '%1' on target computer.\n
232	ERROR  [%2] : An unexpected error occurred adding partitions.  The error code was %1.\n        Additional debugging information: '%3'.\n
234	STATUS  [%1] : Adding partition '%2' on target computer.\n
236	ERROR  [%1]: Unable to find the application '%2' with id '%3' on the target\n       computer.\n
237	ERROR  [%1]: The application '%2' is an NT Service.\n       Its identity information has not been replicated.  The service has\n       been configured to run as LocalSystem, and has been disabled.\n
238	STATUS [%1]: Setting identity for app '%2'.\n
239	\nWARNING: COM+ Partitions are not supported on one or more target machines.\nCOMREPL will only be able to replicate applications in the global partition\nbetween the source machine and these target machines.\n\nPlease enter YES (upper case) to continue:
240	STATUS [%1] : Replicating Partition Users.\n
241	ERROR  [%1] : An error occurred replicating the partition users\n        collection.  The error code was %2.  Make sure that\n        all of the users in the partition users collection exist or are valid\n        on the target computer.
242	ERROR  [%1] : An unexpected error occurred deleting partition users.  The error code was %2.\n
251	Errors occurred - refer to the log file for details.\n
252	Replication succeeded.\n
253	\nCOMREPL replicates one computer's COM+ Applications to a one or more target computers.\n\n\nCOMREPL <source> <targetList> [/n [/v]] \n\n	<source>	Specifies the name of the source computer\n	<targetList>	Specifies the names of the target computers separated with blanks\n	/n		Don't issue confirmation prompts\n	/v		Echo log output to the console\n\n
254	\nWARNING: The entire catalog on %1 will be\nreplaced with the catalog from %2\nReplication is an irreversable action.\n\nPlease enter YES (upper case) to continue:
255	Replication terminated.\n
256	ERROR: Could not create the replication server object.  Error code was %1.
257	\nReplication started - logging to %1\n
258	ERROR: The source computer cannot be in the target computer list.\n
259	ERROR: Duplicate computer names in the target list.\n
260	ERROR: Unsupported option '%1'\n
261	ERROR: Missing source and/or target computer.\n
262	YES
271	        Error: Unable to initiate refresh (COM library).\n
272	        Error: Unable to create COMAdminCatalog object.\n
273	        Error: Refresh failed - hr = %x.\n
274	        Refresh completed.\n
361	%1 \n%2 (line %3) \nError Code = 0x%4 \n\n%5
362	%1 \n<Unknown exception!> \nError Code = 0x%2 \n\n%3
363	%1 Setup Error
364	Microsoft Transaction Server
367	Continuing Installation
377	COM+ Setup
382	Currently there is no help for this error message.   Please see %systemroot%\comsetup.log for more details.
407	Sub-component %1 raised an exception while processing the OC_INIT_COMPONENT setup message.
408	Sub-component %1 raised an exception while processing the OC_QUEUE_FILE_OPS setup message.
409	Sub-component %1 raised an exception while processing the OC_ABOUT_TO_COMMIT_QUEUE setup message.
412	Sub-component %1 raised an exception while processing the OC_COMPLETE_INSTALLATION setup message.
413	Sub-component %1 raised an exception while processing the OC_QUERY_STATE setup message.
414	Sub-component %1 raised an exception while processing the OC_QUERY_IMAGE_EX setup message.
415	Sub-component %1 raised an exception while processing the OC_QUERY_CHANGE_SEL_STATE setup message.
416	Sub-component %1 raised an exception while processing the OC_CALC_DISK_SPACE setup message.
417	Sub-component %1 raised an exception while processing the OC_NEED_MEDIA setup message.
418	Sub-component %1 raised an exception while processing the OC_QUERY_STEP_COUNT setup message.
419	Sub-component %1 raised an exception while processing the OC_CLEANUP setup message.
420	Component '%1' setup failed to queue an operation for completion on the next computer restart.  This is most likely due to a problem with the registry. Please ensure you have registry write permission and the registry is not corrupt.
421	Setup failed while attempting to copy file '%1' to '%2'.  Please ensure that '%1' exists and that '%2' is not in use by some other process.
422	Setup failed while attempting to move file '%1' to '%2'.  Please ensure that '%1' exists and that '%2' is not in use by some other process.
423	Setup failed to set the file attributes '%1' on the file '%2'.
424	Failed to move file from '%1' to '%2' with %3.
425	Failed to find file '%1'.
426	Failed to get the registry value '%2', '%1'.
427	Failed to set the registry value '%2', '%1'.
428	Failed to load the library '%1'.
429	Failed to register the type library '%1'.
430	Failed to get function address from '%1' for '%2()'.
431	Failed to execute function '%1()' in '%2'.
432	Setup was unable to open the service control manager.
433	Setup could not obtain a handle to the '%1' service.
434	Failed to query service status for '%1'.
435	Failed to start service '%1'.
436	Setup timed out waiting for service '%1' to start.
437	The service control manager was unable to stop the '%1' service.
438	Setup timed out waiting for service '%1' to stop.
445	Setup failed because the user who launched the process does not have administrative privileges. Please log in as an administrator and try again.
446	Setup failed to calculate the disk space requirements for the files specified section '%1' of the COM+ inf file.
447	Setup failed to create all of the registry and INI entries specified in section '%1' of the COM+ inf file.
448	Setup failed to install at least one of the services specified in section '%1' of the COM+ inf file.
449	Setup failed to queue the file operations from section '%1' of the COM+ inf file.
450	Setup was associate the directory ID '%1' with the directory '%2'.
454	Setup was unable to save the link '%1' to the target file '%2'.
455	Setup failed while trying to run '%1'.  Make sure that the executable exists.
458	Setup was unable to create an instance of the '%1' interface from the coclass '%2'
459	A call to QueryInterface for the interface '%1' failed with a '%2' interface pointer
461	Setup was unable to get the '%1' collection.
462	Setup was unable to get the key of the '%1' object.
463	Set was unable to get an object count from the '%1' collection.
464	Setup was unable to get item %1 from the '%2' collection.
465	Setup was unable to get the name of the '%1' object.
466	Setup was unable to populate the '%1' collection.
467	Setup was unable to remove the item '%1' from the '%2' collection.
468	Setup was unable to add an object to the '%1' collection.
469	Setup was unable to save changes to the '%1' collection.
471	Setup could not install a COM+ component from '%1' into the application '%2'.
472	Setup was unable to set the value '%1 = %2' for the '%3' object.
474	Setup could not import the COM+ component '%1' by name into the application '%2'.
477	Sub-component %1 raised an exception while processing the OC_SET_LANGUAGE setup message.
478	Sub-component %1 raised an exception while processing the OC_QUERY_SKIP_PAGE setup message.
479	Sub-component %1 raised an exception while processing the OC_SET_LANGUAGE setup message.
480	Sub-component %1 raised an exception while processing the OC_REQUEST_PAGES setup message.
481	Sub-component %1 raised an exception while processing the OC_QUERY_SKIP_PAGE setup message.
482	Sub-component %1 raised an exception while processing the OC_FILE_BUSY setup message.
483	Warning: Setup was not able to completely migrate the legacy MTS catalog.  More information about the specific problems can be found in the setup error log.
484	Installing COM+
485	Configuring COM+
488	A call to CoInitialize failed: COM could not be initialized on this computer.
489	COM+ could not add the user '%1' to the role '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
490	COM+ could not set a property of the component '%1' in the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
491	COM+ could not import the component '%1' into the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
492	COM+ could not install the component from '%1' into the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
493	COM+ could not set a property of the object '%1' in the collection '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
494	COM+ could not create the object '%1' with GUID '%2' in the collection '%3'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
497	Setup could not create the COM+ catalog. COM+ will not operate correctly without the catalog. If Windows does not work properly, you can attempt to reinstall, if the problem still persist, then you could contact Microsoft technical support.
498	The COM+ event classes could not be registered.
499	Setup could not upgrade the COM+ catalog schema from the previous version.
503	The Java trustlib directory could not be found.  Java has not been installed properly on this computer.
505	Upgrading COM+ (%1 applications)
506	Upgrading COM+ (%1 of %2 applications)
507	%1 setup caught an unhandled exception during installation. %2 will not work when setup completes. \n\nUnhandled exception %3 occurred at address %4. More information, including a stack trace, can be found in the %5\comsetup.log file.
508	COM+
509	Please contact Microsoft Technical Support for assistance with this problem.
510	Members of this role are allowed to modify the configuration of COM+ applications and components on this system.
511	Members of this role are allowed to examine the configuration of COM+ applications and view information related to active objects and their performance.
512	Members of this role are trusted to faithfully transmit messages for queued components on behalf of other users.
513	This role should include the identities under which COM+ server applications run on your system.
514	This role should include the identities under which any COM+ application (library or server) may run on your system.
515	COM+ Transaction Context Component
516	COM+ Extended Transaction Context Component
517	Queued Components Recorder
518	Queued Components Player
519	COM+ QC Dead Letter Queue Listener Starter
520	COM+ Event Notification Server
521	COM+ Instance Tracking Component
522	COM+ Active Process Iteration Server
523	Debug Dump Server
524	COM+ Utilities Application
525	COM+ QC Dead Letter Queue Listener
526	Creating COM+ objects
527	Creating COM+ partitions
528	Creating COM+ applications
529	Creating COM+ System Application service
530	Creating COM+ components
531	Setting COM+ component descriptions
532	Creating COM+ custom activators
533	Deleting legacy COM+ roles
534	Creating COM+ roles
535	Creating COM+ interfaces
536	Creating COM+ methods
537	Installing COM+ roles to applications
538	Updating COM+ roles
539	Setting COM+ System Application as system
540	Com+ Explorer Tracking Event Subscription Application
541	Base Application Partition\Administrator
545	Upgrading COM+ Event Classes
546	Base Application Partition
602	Component Services
604	Unable to start the COMUID.DLL server!  This file may have become unregistered or damaged.  Please verify installation and try again.
606	Error
607	%WINDIR%\Help\ComExp.chm
608	Component Services (COM+) management tool.
609	comexp.chm::/html/af37841f-d0f2-4150-bb83-c08a45bcd6b9.htm
610	General
611	Partitions
612	Users
613	COM+
614	General
615	New &Partition Set...
616	Creates a new partition set.
617	Configure Set &Members...
618	Configure Set &Partitions...
619	Adds or removes users in this partition set.
620	Adds or removes partitions in this set.
621	COM+ ADS Configuration Error
622	New Partition Set
623	New &Partition...
624	Creates a new partition set.
625	New Partition
626	Unable to update set properties
627	Unable to update partition properties
628	Failed to create new partition
629	Unable to set default partition
630	Failed to create new partition set
631	Unable to remove partition from partition set
632	Unable to add partition to partition set
634	Unable to add user to partition set
635	Unable to update user properties
636	Unable to retrieve all user properties
638	Unable to retrieve all partition set properties
639	Unable to retrieve all partitions in this partition set
640	Unable to retrieve all users in this partition set
641	Unable to retrieve all available partitions
643	Organizational Units
644	Please select an Organizational Unit you would like to add to this Partition Set.
645	Pick Set Organizational Units
646	Partition Name
647	Default
648	Partition ID
649	The first partition added to this set has been designated as the default partition.  Please ensure this is the desired default partition before saving set changes.
650	COM+ Partition Configuration Warning
651	Unable to add Organizational Unit to set
652	Unable to retrieve all Organizational Units in this partition set
653	<none>
654	The name value you have entered is too long. Please enter a string less than 64 characters long.
655	The description value you have entered is too long. Please enter a string less than 512 characters long.
656	The GUID entered is not in the proper form.   Please enter a non-NULL GUID in the following form: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}
657	Base Application Partition
658	The GUID entered has already been used by another object in this container.
659	Component Services
901	Role-based Security Policy
902	Default Role Membership Policy
903	QC Trusted User
922	
\n
\nDestination of the rejected call:
\n  Application Id: %s
\n  CLSID:           %s
\n  IID:                 %s
\n  Method #:      %ld
\n
\n  Class:       %s
\n  Interface: %s
\n  Method:   %s
\n
\nCaller Information:
\n
923	Svc/Lvl/Imp = %d/%d/%d,  Identity = %s %s
\n
924	(unknown)
925	(Direct)
926	(Original)
927	
\nServer Application ID: %s
928	
\nServer Application Name: %s
929	
\nThe serious nature of this error has caused the process to terminate.
930	
\nError Code = 0x%08x : %s
931	
\nCOM+ Services Internals Information:
\nFile: %s, Line: %d
932	Error in %s(%d): %s
933	Error in %s(%d), hr = %x: %s
934	Error in %s(%d), %s: %s
936	
\nException: %s
937	
\nAddress: %s
938	
\nCall Stack: 
940	
\nComponent Prog ID: %s
941	
\nMethod Name: %s
942	
\nProcess Name: %s
943	
\nComsvcs.dll file version: %s %s %s
944	
\nServer Application Instance ID:
\n%s
945	COM+
946	This component is registered in one or more Application Partition(s) outside of Base Application Partition. COM+/VB6 Debugging Integration does not support this scenario.\n\nPlease debug your component while it is registered ONLY in the Base Application Partition.
947	COM+ System Application
948	Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start.
949	 A mini dump of the process will be taken.
950	 A full dump of the process will be taken.
951	 The process will be terminated.
1701	Lar&ge Icon\nLarge Icon
1702	S&mall Icon\nSmall Icon
1703	&Detail\nDetail
1704	&Status\nStatus
1707	&Refresh\nRefresh
1713	&List\nList
1741	Verdana
1800	Enabling JIT Activation requires synchronization.
1801	Name
1802	Activated
1803	 
1804	Starting server...
1806	CLSID
1807	Server
1808	Objects
1809	Prog ID
1810	Application ID
1811	Description
1812	Security
1813	Authentication
1814	Default
1815	None
1816	Connect
1817	Packet
1818	Call
1819	Packet Integrity
1820	Packet Privacy
1821	Enabled
1822	Disabled
1824	My Computer
1825	Select files to install
1826	Component Files (*.dll;*.tlb)|*.dll;*.tlb|All Files (*.*)|*.*||
1827	File
1828	Component
1829	Contents
1831	Proxy
1832	Properties
1833	COM+
1834	COM
1835	not found 
1836	found
1837	components
1838	typeLib
1839	proxy/stub
1840	InterfaceID
1841	Threading Model
1842	Transaction
1843	Required
1844	Requires new
1845	Not supported
1846	Supported
1847	Add Users and Groups to Role
1848	Yes
1849	No
1850	In Call
1851	Component Install
1852	Applying changes...
1853	Refreshing...
1854	Opening %s...
1855	Any Apartment
1856	Free Thread Apartment
1857	Catalog Error
1858	You do not have permission to perform the requested action.  If security is enabled on the System Application of the target computer  make sure you are included in the appropriate roles.
1859	Initialization Error
1860	Unable to start application because %1 is not installed properly. Please re-install this product.
1863	Cannot open this folder because connection to the MSDTC service on '%1'  failed. Make sure that:
\n
\nThe computer is running.
\nYou have permissions to administer the computer.
\nThe computer name is correct.
1864	Connecting to the MSDTC service on '%1'.  This icon will be enabled when the connection has been established.
1865	Open Folder
1866	DLL
1867	Started
1868	Stopped
1869	Starting
1870	Stopping
1871	Connecting
1872	Connection failed
1873	DTC
1874	%s object(s)
1875	Install
1876	One or more files do not contain components or type libraries. These files cannot be installed.
1882	New Application
1883	You cannot use the name '%1' because it is already in use.  Please choose another name.
1884	Reason
1885	Name
1886	The object was not found in the catalog
1887	One or more of the object's properties are missing or invalid
1888	The object is already registered
1889	Some components could not be installed due to the following errors:
1890	Some changes could not be applied due to the following errors:
1891	Some objects could not be deleted due to the following errors:
1892	Some object properties could not be read due to the following errors:
1893	The component is already configured on the requested computer.\n\nThe component is either installed in a application or configured as a remote component. Before re-installing, you must delete the existing component.
1894	An error occurred while processing the last operation on the remote computer '%1'.\nError code %2\nThe event log may contain additional troubleshooting information.
1895	An error occurred while processing the last operation.\nError code %1\nThe event log may contain additional troubleshooting information.
1896	Some of the objects properties were missing or damaged.\n\nThis can occur if the registry entries associated with the item are changed by some other program.\n\nDamaged items must be deleted and re-created.
1897	The item or one of its parent items in the hierarchy has already been deleted.
1898	Explanation
1899	You entered an invalid file name or path or selected too many files at once.  There is a limit of 256 characters for the combined length of all file names selected.
1900	An unknown error occurred while adding files.  Please try to add the files again.
1901	Add Computer
1902	The %1 string you entered is too long.  The maximum length is %2 characters.
1903	name
1904	The %1 property cannot contain any of the following characters \ /  ~ ! @ # % ^ & * ( ) | } { ] [ ' " > < ? : ; .
1905	You cannot add computer '%1' because it already exists in your Computers folder.
1906	Export application to File
1907	Application Files (*.MSI)|*.MSI|MTS Package Files (*.PAK)|*.PAK||
1908	Export Application
1909	Application File
1910	Application Name
1911	Choose an installation directory:
1912	Error occurred reading the application file
1913	The application file cannot be read. Either the file does not exist, the file contains invalid data or a read error occurred accessing the file.
1914	The application is already installed.
1915	A application with the same application ID is already installed.  Make sure you have not already installed this application file.
1916	The file path is invalid
1917	The installation path does not exist and cannot be created.  Check the path syntax.
1918	An error occurred copying the file
1919	An error occurred copying files to the destination directory.  Some files may be missing from the source directory or you may not have access to the install directory.
1920	Errors occurred while installing the following applications:
1921	One or more components could not be installed.
1922	The application could not be installed because installation of the following components failed:
1923	Error occurred writing to the application file.  Either the path cannot be accessed or an existing file cannot be overwritten. Make sure you entered the full path for the application definition file.  The application was not exported.
1924	Unable to copy component files to the application definition file directory.  An error occurred writing to the directory or existing files could not be overwritten.  The application was not exported.
1925	One or more objects in the application are damaged.  The application was not exported.  Open all components, interfaces, roles and role membership lists in the application to verify the integrity of the application objects. 
1926	Install from application file
1927	COM DLL
1928	One or more files are COM DLLs but do not contain any components.  These files could be proxy/stub DLLs or component DLLs with no corresponding type information.  These files will be self-registered if you proceed.  If these files are not proxy/stub DLLs you should remove them from the list.  Do you want to proceed and install these files?
1929	Edit Property
1930	The shutdown delay must be a number between 0 and 1440.
1931	The DLL could not be loaded.  Check to make sure all required application runtime files and other dependent DLLs are available in the component DLL's directory or the system path.
1932	One or more files were not found on computer '%1'.  When installing components on a remote computer you must enter file names that the remote computer can access.  You can enter a UNC name or a drive:path file name that exits on the remote computer. 
1933	A component in the same DLL is already installed
1934	This component could not be installed because another component in the same DLL is already registered as remote.  Delete those remote components and try installing the component again.
1935	One or more user accounts or groups could not be added to roles because they do not exist.  The application was installed.
1936	One or more users in the application file are not valid
1937	You must enter a user account.
1938	Password and confirm password do not match.
1939	Unable to set required authentication level for update request.  The request cannot be completed.
1940	Set Application Identity
1941	The timeout value must be between 1 and 3600.
1942	The user account or password entered is invalid.  If you entered a domain account, make sure the name is prefixed with the domain name.
1943	The component's CLSID is missing or corrupt
1944	The component's CLSID is not registered. The component may have been unregistered, or the component registration information may be invalid.  Make sure the component's self-registration code is correct and re-install the component
1945	The component's progID is missing or corrupt
1946	The component's progID information is invalid.  The component's progID information does not match the component's CLSID information.  The progID or CLSID information may have been incorrectly updated.  Make sure that the component's self-registration code is correct and re-install the component.
1947	Transaction statistics for '%1' are already displayed in another window.  You can only open one transactions statistics window for a given server.
1948	The transaction list for '%1' is already displayed in another window.  You can only open one transaction list window for a given server.
1949	You entered your local computer name. Your local computer is already in the Computers folder under the name "My Computer"
1950	Application file CLSIDs or IIDs do not match corresponding DLLs
1951	The component information in the application file is out of date.  A component CLSID or IID has been re-generated since the application was exported.  You must re-export the application.
1952	Account
1953	Timeout
1954	Shutdown
1955	Run always
1956	Interface information is either missing or changed
1957	If the component was imported, no interface information is available.  If the component was installed, the interface information has been regenerated since the component was installed.  Delete the component from the application and re-install it.
1958	The typelib could not be loaded
1959	Shortcut Menu
1960	There are no commands that apply to the selected items.
1961	Are you sure you want to delete '%1'?
1962	Are you sure you want to delete these %1 items?
1963	Confirm Item Delete
1964	Confirm Multiple Item Delete
1965	No server file share available
1966	No visible file share point is available on the server to copy component files.  The user account set for the System application on the client computer must have read access to a share point on the server.  A visible share point must be available to access the proxy/stub DLL and type library for each component. You can use the Explorer to check which proxy/stub DLLs and type libraries are registered for the interfaces implemented by the components.
1967	You entered a local file name for use on the remote computer '%1'.  The drive and path will be interpreted as a file name on the remote computer.  Are you sure you want to install this file?
1968	The file does not exist
1969	DLL could not be loaded
1970	The component DLL could not be loaded.  Make sure that all required application runtime files or other dependent DLLs are available in the DLL's directory or the system path.
1971	DllRegisterServer failed on component install
1972	The component DLL's self-registration routine failed.  The DllRegisterServer function failed or the routine did not register the component.
1973	GetClassObject failed in the DLL.  Either a DLL threw an exception during install processing or the DLL and its embedded type library are out of sync.  Ensure that the correct versions of all application runtime files or other dependent DLLs are available in the component DLL's directory or the system path.
1974	Export Application
1975	The application file name you entered will be interpreted as a local file name on the remote computer '%1'.  The remote computer must have access to the file.  Are you sure you want to export to this file?
1976	Install Application
1977	You entered one or more local file names for use by the remote computer '%1'.  These file name will be interpreted as local files on the remote computer.  Add these files?
1978	The install directory is a local path name that will be used by the remote computer '%1'.  The path will be interpreted as a local path on the remote computer.  Continue with application install?
1979	The registered typelib ID is not valid
1980	Registered type library information is invalid.  The library GUID, version, locale, or platform information may be corrupt.  Re-install the corresponding component(s).
1981	The "Application Directory" setting in your system registry is missing or corrupted.
1982	One or more CLSIDs were specified in a type library but were not recognized by any class factories in the DLLs.  The component DLLs cannot be installed.
1983	Errors occurred while in the component registrar
1984	Registration of this component failed.  This component resides in a file which lacks self-registration code but for which an external entity for registering components from such files has been provided.  This external entity failed to register the component.  Check the event log for details.
1985	The component registrar referenced in this file is not available
1986	Registerable
1987	Running
1988	Activation
1989	Same name cannot be set for multiple items.
1990	This application file version is not supported.
1991	This application file version is not supported.  The catalog into which you are attempting to install this application file does not support this application file's version.
1992	The '%1' application was created by '%2'. Are you certain the changes you are about to make are supported by '%2' ?
1993	The applications were created by one or more external products. Are you certain the changes you are about to make are supported by these products?
1994	The server catalog version is not supported.  The catalog is either newer or older than this application and a common version for communication does not exist.
1995	Changes to this object and its sub-objects have been disabled
1996	The selected item cannot be changed. The item is currently locked against changes.
1997	The delete function has been disabled for this object
1998	The selected item cannot be deleted.  This item is currently locked against deleting.
2000	Service Control Error
2001	Unable to start the MSDTC service on the target computer. Error code was "%1".
2002	Unable to stop the MSDTC service on the target computer. Error code was "%1".
2003	Unable to stop the MSDTC service. There are other running services dependent on MSDTC.
2004	Library
2005	Server
2006	Disabled
2007	One or more users do not exist or lack security privileges for this operation
2008	The "Default" authentication level is no longer supported. The authentication level will be changed to "Packet". 
2009	Property Initialization
2010	DTC Error
2011	DTC was installed by the SQL server. Please reinstall!
2012	One or more components are not registered.
2013	This application file refers to components that were originally imported into the application.  These components must be manually registered before installing the application.  One or more  of these components is not registered on the target system. 
2014	The System application on this computer is currently not available.  Please retry the request.
2015	Unable to connect to the remote computer named '%1'.  Either the machine does not exist or you don't have permission to access this machine.
2016	&Computer
2017	&Application
2018	&Component
2019	&User
2020	&Role
2021	Add
2022	%d Items
2024	Single Thread Apartment
2025	Main Thread Apartment
2026	Thread Neutral Apartment
2027	Synchronization
2028	Warning
2029	The transaction level or just in time activation setting that was just selected is not compatible with the currently selected synchronization level.  The synchronization level will be changed to a compatible level.
2030	Welcome to the %s
2031	Building component list...
2032	COM+ Component Install Wizard
2033	This wizard will help you to install or import components.
2034	The wizard has gathered all necessary information to perform the install.
2035	COM+ Application Install Wizard
2036	This wizard will help you to install or create new applications.
2037	The wizard has gathered all necessary information to perform the install.
2038	Import or install a component
2039	Install new components
2040	Choose Components to Import
2041	Create Empty Application
2042	Install or Create a New Application
2043	Application Installation Options
2044	Set Application Identity
2045	Select Application Files
2046	...install a new component or import components that are already registered.\n
2047	Please specify the file(s) that contain the components you want to install.
2048	Please choose the components you want to import.
2049	Please specify the name of the new application.
2050	Please choose whether you want to install a pre-built application or create an empty application.
2051	Please specify the install directory and the role configuration.
2052	Please specify the application identity.
2053	Please specify the files that contain the application you want to install.
2054	Thank you for using the %s
2055	Pooled
2056	Call Time (ms)
2057	Minimum pool size must be less than the maximum pool size
2058	Service request failed with error code %1
2059	The service is not installed
2060	The identity or password set on the application is not valid
2061	Out of memory
2062	The application you are trying to export was not found. Press the refresh button to get the latest list of applications.
2063	An interface in the application you are trying to export is not registered. Make sure that the application was properly installed.
2064	Maximum pool size may not be set to zero
2065	Impersonation
2066	Default
2067	Anonymous
2068	Identify
2069	Impersonate
2070	Delegate
2071	PID
2072	COM+ Application Export Wizard
2073	This wizard will help you to export client or server applications.
2074	The application has been successfully exported.
2075	Application Export Information
2076	Please enter information required to export this application.
2077	Executable Files (*.exe)|*.exe|All Files (*.*)|*.*||
2078	If you change the activation of this application, certain properties will be reset to their default values once the activation setting has been saved.
2079	A system application's identity cannot be changed.
2080	Server Application Files (*.MSI)|*.MSI||
2081	Starting application(s)...
2082	Shutting down application(s)...
2083	A role assigned to a component, interface, or method did not exist in the application
2084	Importing components...
2085	Installing components...
2086	This application was set to run forever when the listener was enabled.  You may wish to go to the advanced page and modify the shutdown time.
2087	If you save these changes and you have already exported this queued application you must export it again.  Otherwise, clients will send unauthenticated messages which will get rejected by the QC listener.
2088	Object was not found in registry
2089	You may need to reinstall this component to restore the required registry settings.
2090	Either MSMQ is not installed or not running, or this application is not set to run as a queued application.
2091	Error %08X occurred.
2092	An unknown error occurred.  You should check all documentation for a solution.  If no further information is available, please contact technical support.
2093	Not specified (both assumed)
2094	Application Proxy Files (*.MSI)|*.MSI||
2095	DTC error %08X occurred.
2096	A problem occurred while interacting with the DTC service.  You should verify that DTC is started and working properly.
2097	One of the objects being updated does not exist
2098	This operation can not be performed on the system application
2099	Certain operations cannot be performed on the system application.  Please refer to the documentation for more information.
2100	Due to the selected transaction support level, JIT Activation and synchronization are required.
2101	An object being inserted or updated does not belong to a valid parent collection
2102	Subscription ID
2103	&Subscription
2104	Data
2105	COM+ New Subscription Wizard
2106	This wizard will help you to create a new subscription.
2107	The wizard has gathered all necessary information to create the subscription.
2108	Select Event Class
2109	Select the event class that implements the method(s).
2110	Select Subscription Method(s).
2111	Select the subscription method or methods.
2112	Subscription Options
2113	Set the subscription properties.
2114	Another version of this application is already installed.  Installation of this version cannot continue.  To remove the existing version, use Add/Remove Programs on the Control Panel.
2115	One or more of the components in this application were imported.  As a result, those components do not contain interface and method information.  Exporting this application may create an application which is unusable on other machines.
2116	You must have enabled components in an application in order to start the application
2117	Access denied
2118	The publisher ID must be specified because both "use all interfaces" and "use all event classes" were chosen
2119	ThreadingModel value has changed
2120	The ThreadingModel value found in the registry has been modified outside of the COM+ environment.  You will need to reinstall this component.
2121	Process Dump
2122	The dump of the selected process succeeded. \nThe image was dumped to the default dump directory.
2123	&Partition
2124	Partition ID
2125	Pausing process(es)...
2126	Resuming process(es)...
2127	Copy the application '%s' from partition '%s' to the partition:
2128	Copy these %d applications to the partition:
2129	SOAP unavailable. IIS is not installed
2130	Please enter a service name.
2131	The service name entered has invalid characters. The '/' and '\' characters are not valid in service names.
2132	MMC could not enumerate existing services from the Service Control Manager. The service dependencies configuration list will not be available.
2133	This application has a dependency on a non-existent service. That dependency has been removed.
2134	A service already exists for this application. Configuring a new service will remove and replace the existing application service. Existing service settings will not be visible from this dialog. To change existing service settings use the Services MMC Snapin. Press OK to continue configuring a new service.
2135	Changing the transaction isolation level from 'Serialized' or 'Any' requires that all components called from this component have an isolation level less than or equal to the isolation level set for this component.
2136	Process ID
2137	Executable Name
2138	Paused
2139	The application %s cannot be stopped, because the following services depend on it, and are still running:
2140	Application ID
2141	Instance ID
2142	Type
2143	Set ID
2144	Default Partition
2145	Base Application Partition
2146	Information
2147	There are no local partitions available to add to the set.\n\nThe Add Partition to Set dialog will now exit.
2148	One or more of the specified users already exist in another local partition set. 
2149	The files could not be imported because they were compiled for different processor types
2150	The files could not be imported because they were compiled for an unsupported machine type
2151	The files could not be imported because they were compiled for a different processor type than the components already installed in the application
2153	{}-1234567890abcdefABCDEF
2154	The CLSID entered is invalid.
2155	The ProgID entered is invalid. A ProgID may not begin with a digit.
2156	The catalog server threw an exception and could not process the request.
2157	Any
2158	Read Uncommitted
2159	Read Committed
2160	Repeatable Read
2161	Serialized
2162	Name
2163	msCOM-ObjectID
2164	(ObjectClass=msCOM-Partition)
2165	All visible directory partitions are currently present on this system.
2166	Error
2167	The following error occurred attempting to browse partitions on the domain\n\n%1
2168	User Browser
2169	Select user:
2170	The current user does not have the authority to browse partitions on the domain. To search as another user enter their username and password below.
2171	Please enter the username and password to be used when browsing domain partitions.
2172	No partitions are currently visible on the domain
2173	Description
2175	These COM components are registered to run as in-process servers.  Select the components you want to import.
2176	These are the registered COM components.  Select the components you want to import.
2177	&Legacy Component
2178	Legacy Component Import Wizard
2179	This wizard will help you import legacy components.
2180	Select users to assign default partition
2181	Promoting %s Legacy Components...
2185	&Configure My Computer\nConfigure My Computer
2186	Copying component(s)...
2187	Copying application(s)...
2188	The specified Partition ID is already in use by '%1'\nPlease use another Partition ID.
2191	Applications that run as services cannot use the interactive user identity.
2192	Library and Proxy applications do not have an identity.
2193	\
2194	NULL
2195	The CLSID %1, item %2 and title %3 has the named value AppID, but is not recorded under \\HKEY_CLASSES_ROOT\AppId.  Do you wish to record it?
2196	DCOM Configuration Warning!
2197	Duplicate ProgID's are not allowed within the same partition. Please assign a new ProgID for the copied component.
2198	Duplicate CLSID's are not allowed within the same partition. Please assign a new CLSID for the copied component.
2199	CopyOf.
2200	Error
2201	The COM+ explorer was unable to locate information required to perform the requested action. This may be caused by running out of system resources such as memory.
2202	               
2203	The specified service name already exists. Please choose another name for the application service. 
2204	Input out of range. Please enter a number between %1 and %2.
2205	Moving component(s)...
2206	The specified partition does not exist or you do not have permission to perform the requested action.  Make sure that you are a member of a partition set that includes the partition you are trying to use.
2207	Please enter a number between %1 and %2 for the %3.
2208	Application Pool Size
2209	Maximum Concurrent Players
2210	Minimum Object Pool Size
2211	Maximum Object Pool Size
2212	Object Creation Timeout
2213	Transaction Timeout
2214	The "Run application as NT Service" option will not be available until this change is applied.
2215	Do you want to stop this service?
2216	Do you want to stop these services?
2217	The application %s cannot be stopped, because the following service depends on it, and is still running:
2218	The requested action cannot be performed because DTC is not running.
2219	Global
2220	Connection-oriented Netbios over TCP
2221	Connection-oriented Netbios over IPX
2222	Connection-oriented NetBEUI
2223	Connection-oriented TCP/IP
2224	Connection-oriented named pipes
2225	Connection-oriented SPX
2226	Connection-oriented DECnet transport
2227	AppleTalk DSP
2228	Connection-oriented Vines SPP transport
2229	Datagram UDP/IP
2230	Datagram IPX
2231	Windows Machine Name
2232	Four octet Internet address or DNS host name
2233	Internet Port Number
2234	Integer between 0 and 255. (0 - 32 reserved).
2235	Windows Server name (backslashes optional)
2236	Windows named pipe - start with "\\pipe"
2237	... default system protocols ...
2238	Invalid endpoint format. Expecting \n%1.
2239	Integer between 0 and 65535
2240	IPX Internet address or Windows server name
2241	DECnet area and node syntax
2242	DECnet phase IV object number
2243	Windows machine name optionally followed by @ AT zone
2244	AppleTalk endpoint string (max 22 chars)
2245	StreetTalk server (item@group@organization)
2246	Vines SPP port number (250 - 511)
2247	Tunneling TCP/IP
2248	Select the DCOM network protocol sequence that you want to add. Enter the endpoint details and click OK when you have finished.
2249	Select DCOM protocol and endpoint
2250	Modify the endpoint details if desired and click OK when you have finished.
2251	DCOM Endpoint Properties
2252	Duplicate protocol.
2253	The legacy components in this application can not be exported in COM+ 1.O format.
2254	Library applications have the recycling and pooling properties of their host process.
2255	Applications running as a service cannot be pooled or recycled.
2256	Memory Limit
2257	Call Limit
2258	Activation Limit
2259	Lifetime Limit
2260	Expiration Timeout
2261	Server
2262	Invalid port range format: Use a single number such as 4000 or a  range in the form xxxx-yyyy such as 4000-4010.
2263	Default Access Permission
2264	Default Launch Permission
2265	Access Permission
2266	Launch and Activation Permission
2267	Change Configuration Permission
2268	Multi Select
2269	Shutting down process(s)...
2271	Recycling
2272	Activation cannot be forced in the caller's or the default context when access checks are enforced. 
2273	The Partition GUID is not a valid GUID. Please enter a GUID in the following form: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}
2274	The set of protocols and endpoints available for use by clients of this DCOM server. The system defaults entry indicates that the default set of DCOM protocols and endpoints for the machine will be used.
2275	Transaction List
2276	Transaction Statistics
2277	The name of this application already exists in the service control manager database either
\nas a service name or as another display name.  Please choose another name.
2278	No partitions were found registered on the Domain.
2279	You must enable this application before attempting to start it.
2280	CLSID
2281	LocalServer32
2282	Local Service
2283	Local Server
2284	Local Path:
2286	Administrator
2287	Browse for folder
2288	Installed
2289	Changes have been disabled for this partition.
2290	Changes have been disabled for this application.
2291	The Base Application Partition has been marked changes disabled. Partitions are not currently visible. Partitions can be made visible by selecting the "View Partitions" item in the view menu.
2292	The wizard has gathered all necessary information to import the component.\n\nWARNING\nImporting a component does not register interface and method information necessary for correct operation of interface- and method-level Role-based Security and QC features. If your component requires these features, use Component Install instead.
2293	The wizard has gathered all necessary information to import the component.\n\nNOTE\nLegacy components do not have access to COM+ services such as object context, transaction, synchronization, etc.
2294	Recycling Process(es)
2295	NT Service
2298	...install new component(s) or event class(es).
2299	Install a Component
2300	An account for this domain and user could not be found.  Check that the user has a valid user account in the specified domain.
2301	The current authentication level is not supported for library applications. The authentication level will be changed to "Default". 
2302	_LocalServer32
2303	LocalServer
2304	_LocalServer
2305	LocalService
2306	_LocalService
2307	Appid
2308	Copy Component(s)
2309	Components to copy: 
2310	No applications were found that are valid destinations for the requested action.
2311	&Interactive user - the current logged on user
2312	&Local Service - Built-in service account.
2313	&Interactive User / Local Service - Server Applications will run as Interactive User,\nServices will run as Local Service.
2314	User %1 has already been assigned a default partition.
2315	Default Security
2316	Security
2317	Interfaces
2318	Application Manifest &File:
2319	Application Root &Directory:
2320	Browse for Manifest File
2321	Manifest Files (*.dll;*.exe;*.xml)|*.dll;*.exe;*.xml||
2322	COM+ Partition Install Wizard
2323	This wizard will help you to install or create new partitions.
2324	The wizard has gathered all necessary information to perform the install.
2325	Install or Create a New Partition
2326	Please choose whether you want to install a previously exported partition or create an empty partition.
2327	Create Empty Partition
2328	Please specify the name of the new partition.
2329	Partition Installation Options
2330	Please specify the install directory.
2331	Select Partition Files
2332	Please specify the files that contain the partitions you want to install.
2333	Role
2334	Full Control
2335	Read
2336	Query Value
2337	Set Value
2338	Create Subkey
2339	Enumerate Subkeys
2340	Notify
2341	Create Link
2342	Delete
2343	Write DAC
2344	Write Owner
2345	Read Control
2347	Registry Value
2348	Partition Files (*.MSI)|*.MSI||
2349	Partition Export Information
2350	Please enter information required to export this partition.
2351	COM+ Partition Export Wizard
2352	This wizard will help you export a partition.
2353	The partition has been successfully exported.
2355	Server applications cannot run under system service accounts.
2356	Interactive User
2357	Network Service
2358	Local Service
2359	Local System
2385	Applications that are configured to run as a service and interact with the desktop must run under Local System.
2386	Context properties are ignored when activation context is forced.
2387	Any Application
2388	QC Trusted User
2389	Reader
2390	Server Application
2391	Activator
2392	System Application
2393	COM+ Utilities
2394	COM+ Explorer
2395	COM+ QC Dead Letter Queue Listener
2396	COM+ partitions are currently disabled.
2397	N&etwork Service - Built-in service account with network access
2398	Please add application roles.
2399	Add Application Roles
2400	Please add users to roles.
2401	Add Users to Roles
2402	Roles
2407	SSL required for secure publication
2408	Implement full COM+ security
2409	Expose component methods to any caller
2411	Local Access
2412	Remote Access
2413	Local Launch
2414	Remote Launch
2415	Local Activation
2416	Remote Activation
2417	Security Limits
2450	COM+ Event System
2451	Supports System Event Notification Service (SENS), which provides automatic distribution of events to subscribing Component Object Model (COM) components. If the service is stopped, SENS will close and will not be able to provide logon and logoff notifications. If this service is disabled, any services that explicitly depend on it will fail to start.
2701	&About DAC...
2702	Category
2703	Current
2704	Peak
2705	Average
2706	Status
2707	Unit of Work ID
2708	Isolation Level
2709	Severity
2710	Source
2711	Message
2712	Pause
2713	Continue
2714	Status: Unknown
2715	Status: Starting
2716	Status: Started %1
2717	Status: Stopping
2718	Status: Stopped
2719	Status: Pausing
2720	Status: Paused
2721	Status: Error
2722	Mi&nimize
2723	&Restore
2724	MS DTC Admin Console
2725	Could not initialize the UI Client Component.\n Terminating
2726	DTC Admin Console - Not Connected
2727	DTC Admin Console - Connected
2728	Num. Open:
2729	Num. Committed:
2730	Num. Aborted:
2731	Num. In Doubt:
2732	Num. Heuristic:
2733	DTC Admin Console - Connecting
2734	Cl&ose
2735	&General
2736	&Transactions
2737	Trac&e
2738	&Statistics
2739	&Advanced
2740	DTC Console Message
2741	Windows 95
2743	(active)
2745	(preparing)
2747	(prepared)
2749	(committing)
2751	(comitted)
2753	(aborting)
2755	(aborted)
2757	(in doubt)
2759	(heuristic commit)
2761	(heuristic abort)
2763	(heuristic danger)
2765	(heuristic damage)
2767	(forced commit)
2768	(forced abort)
2769	(committing)
2770	(only failed to notify)
2771	207
2772	143
2773	Parent / Subordinate
2774	ID
2775	&Reset
2776	(cannot notify commit)
2777	(cannot notify abort)
2778	<no parent>
2780	MSDTC
2781	Invalid log size.
2782	Please enter a log size of 1 MB or more.
2783	Uncommitted changes
2784	Changes to the configuration have not been applied. \n\nContinue without applying changes?
2785	Cannot set the default coordinator to be this computer.\nYou have to re-install the MS DTC server to reset the default coordinator setup.
2786	Could not load the contact manager component needed to access registry functions.
2787	A default transaction coordinator already exists in your local registry.\nReplace existing entry ?
2788	The network computer you have selected does not have a transaction coordinator installed. Please try a different computer.
2793	TCP/IP
2794	SPX
2795	NetBEUI
2796	at %1 - %2
2797	Distributed Transaction Coordinator
2798	Coordinates transactions that span multiple resource managers, such as databases, message queues, and file systems. If this service is stopped, these transactions will not occur. If this service is disabled, any services that explicitly depend on it will fail to start. 
2799	Invalid log location. Please select a local fixed device for the location of the log.
2800	Invalid log location. The log file must be located on a shared cluster device.
2801	Invalid log size. The log file must be between 1Mb and 512MB in size.
2802	Working...
2803	Select Computer
2804	Unable to load netapi32.dll
2805	Unable to load a system function from netapi32.dll
2806	Error opening the key for workgroup in the system registry.\nPlease contact Microsoft product support (error: %d).
2807	Error reading the value for workgroup in the system registry.\nPlease contact Microsoft product support (error: %d).
2808	Failed to copy the MS DTC log file to the shared disk.  Please contact product support.
2809	An error occurred while trying to read information about any previous installations of MS DTC.  Please contact product support.
2810	An error occurred while trying to read information about any previous cluster-aware installations of MS DTC.  Please contact product support.
2811	Failed to get a list of the virtual servers in the cluster.  Please contact product support.
2812	Failed to get a list of the shared disks in the cluster.  Please contact product support.
2813	Setup found that the current configuration of the cluster does not contain any resource groups in which the MS DTC resource can be created.  Setup of MS DTC requires that the cluster contain at least one resource group that contains both a network name resource and a shared disk resource.  Setup also requires that this resource group be owned by the first node in the cluster on which setup is run.  Please re-run setup after the appropriate changes to the cluster configuration have been made.
2814	Setup found that none of the network name resources are owned by this node and that this is the first time that setup was run on any node in the cluster.  Setup of MS DTC requires that the cluster contain at least one resource group that contains both a network name resource and a shared disk resource.  Setup also requires that this resource group be owned by the first node in the cluster on which setup is run.  Please re-run setup after the appropriate changes to the cluster configuration have been made.
2815	Failed to create the MS DTC log file's directory.  Please contact product support.
2816	Microsoft Distributed Transaction Coordinator Setup
2817	Failed to set the attributes on the MS DTC log file.  Please contact product support.
2818	Failed to launch the MS DTC process.  Please contact product support.
2819	Failed to install MS DTC on a master node in the cluster.  Please contact product support.
2820	An unknown error occured while trying to install MS DTC.  Please contact product support.
2821	Failed to install MS DTC on a secondary node in the cluster.  Please contact product support.
2822	Failed to upgrade the MS DTC installation on the cluster.  Please contact product support.
2823	Setup detected an incompatible version of MS DTC installed.  Setup cannot continue installing MS DTC.
2824	Setup does not allow rolling upgrades of MS DTC.  Setup is exiting.
2825	The first node on which MS DTC was installed is down.  Please start that node and re-run setup.
2826	Failed to install MS DTC.  Please contact product support.
2827	The MS DTC Setup completed sucessfully.
2828	Setup has sucessfully populated configuration information to allow MS DTC to run on this cluster node.  Please run setup on all other nodes in the cluster before continuing.
2829	Setup failed because it was unable to completely remove all older versions of MS DTC.  Please make sure that all applications using MS DTC are shut down and that the Control Panel window is closed.  If this problem persists please contact product support.
2830	Setup determined that a newer version of MS DTC is installed, hence setup will exit without performing any changes.
2831	Setup failed because it was unable to install the performance counter extension for MS DTC. If this problem persists please contact product support.
2832	 Failed to shutdown the MS DTC process. Please contact product  support.
2833	Invalid log directory. The log location is not a valid directory name.
2834	Log directory does not exist. Do you wish to create a new directory?
2835	MS DTC service will be stopped and restarted. All dependent services will be stopped. Please press yes to proceed.
2836	MS DTC service has been restarted
2837	Please enter a valid account
2838	There is a mismatch between the passwords, please try again
2839	Failed to update the security attributes. Please examine the eventlog for further details.
2840	Failed to stop the MS DTC service. Please examine the eventlog for further details.
2841	Failed to restart the MS DTC service. Please examine the eventlog for further details.
2842	MS DTC service is in an unknown or uncontrollable state. Please try to stop the MS DTC service and try again
2843	A remote host machine must be specified.
2844	The specified remote host machine does not exist.
2845	The MSDTC service and all the services that depend on MSDTC service will be stopped.Do you wish to proceed?
2846	An MS DTC log file already exists in the selected directory. Resetting an existing MS DTC log file may cause your databases and other transactional resource managers to become inconsistent. Please review the MS DTC Administrator's Manual before proceeding. Do you wish to reset the existing MS DTC log file?
2847	Out of memory.
2848	Could not initialize the MS DTC Admin Console General Page
2849	Could not locate the MS DTC configuration interface.
2850	The size of the MS DTC log is invalid.
2851	Could not find the MS DTC log disk device. Please select a new location for the MS DTC log file.
2852	Insufficient disk space for the MS DTC log file.
2853	Could not connect to the MS DTC statistics component.
2854	Could not connect to the MS DTC transaction list.
2855	Failed to get the DTC log path.  Please contact product support.
2856	Failed to get the DTC service name.  Please contact product support.
2857	Local DTC
2858	Clustered DTCs
2859	An error occured attempting to recover from a previous error. DTC may not work correctly.
2860	Logging
2861	An error occured changing the DTC account. Please try again.
2862	Security
2863	The specified remote host name is too long.
2864	Select the folder that will contain the DTC log file.
2865	Tracing
2866	The specified maximum buffer count is out of range. Valid values are between 1 to 999.
2867	An error occured processing the transaction list from MSDTC. The list may not be correct.
2868	Failed to get the security configuration for the remote host.
2869	The specified remote host does not allow remote administration.
2946	KtmRm for Distributed Transaction Coordinator
2947	Coordinates transactions between MSDTC and the Kernel Transaction Manager (KTM).
2948	DCOM Machine wide settings
2949	You are about to modify machine wide DCOM settings, this will effect all the applications on the machine, some applications may not work correctly as a result.Update DCOM settings?
2950	DTC MMC Snap-in
2951	DTC MMC Property-sheet extension
3101	Distributed Transaction Coordinator
3102	Microsoft Distributed Transaction Coordinator Resource
3200	Ignore
3201	Normal
3202	Severe
3203	Critical
3204	Manual
3205	Automatic
3211	Microsoft Corporation
7000	0,Root
7020	0,Computers,0x00000000,
7022	1,1,119534,0x00000000,22
7024	1,11,0,0xFFFFFFFF,
7025	8
7026	1,14,0,0xFFFFFFFF,
7027	8
7028	1,300,0,0xFFFFFFFF,
7029	8
7030	1,301,0,0xFFFFFFFF,
7031	8
7032	1,302,0,0xFFFFFFFF,
7033	8
7100	0,COM+ Applications,0x00000010,
7110	1,3,124626,0x00000000,60
7200	0,Components,0x00000000,
7210	1,4,119538,0x00000000,20
7215	1,30,0,0xFFFFFFFF,
7216	8
7250	0,Interfaces,0x00000000,
7260	1,9,119540,
7265	1,31,0,0xFFFFFFFF,
7266	8
7270	0,Methods,0x00000000,
7275	1,10,119542,
7280	1,32,0,0xFFFFFFFF,
7281	8
7285	8
7286	8
7290	8
7291	8
7300	0,Subscriptions,0x00000000,
7310	1,34,119550,
7315	1,37,0,0xFFFFFFFF,
7316	8
7318	8
7319	8
7328	8
7329	8
7400	0,Legacy Components,0x21000000,
7410	1,45,0,
7420	8
7430	8
7440	0,Roles,0x00010000,
7450	1,7,119546,
7460	0,Users,0x00000000,
7470	1,8,119548,
7480	8
7490	8
7500	8
7510	8
7520	0,Roles,0x00100000,
7530	1,36,119546,
7540	0,Users,0x00000000,
7550	1,8,119548,
7560	8
7570	8
7580	8
7590	8
7620	8
7630	8
8000	0,COM+ Partitions,0x20000001,
8050	1,40,0,
8100	0,COM+ Applications,0x00000000,
8110	1,3,124626,0x00000000,60
8200	0,Components,0x00000000,
8210	1,4,119538,0x00000000,20
8215	1,30,0,0xFFFFFFFF,
8216	8
8250	0,Interfaces,0x00000000,
8260	1,9,119540,
8265	1,31,0,0xFFFFFFFF,
8266	8
8270	0,Methods,0x00000000,
8275	1,10,119542,
8280	1,32,0,0xFFFFFFFF,
8281	8
8285	8
8286	8
8290	8
8291	8
8300	0,Subscriptions,0x00000000,
8310	1,34,119550,
8315	1,37,0,0xFFFFFFFF,
8316	8
8318	8
8319	8
8328	8
8329	8
8400	0,Legacy Components,0x01000100,
8410	1,45,0,
8420	8
8430	8
8440	0,Roles,0x00010000,
8450	1,7,119546,
8460	0,Users,0x00000000,
8470	1,8,119548,
8480	8
8490	8
8500	8
8510	8
8520	0,Roles,0x00100000,
8530	1,36,119546,
8540	0,Users,0x00000000,
8550	1,8,119548,
8560	8
8570	8
8580	8
8590	8
8620	8
8630	8
8632	0,Roles,0x00000002,
8634	1,42,119546,
8636	0,Users,0x00000000,
8638	1,43,119548,
8640	8
8642	8
8648	8
8650	8
8662	8
8663	8
8770	0,COM+ Partition Users,0x20000001,
8771	1,41,0,
8772	8
8773	8
8800	0,DCOM Config,0x10000000,
8801	1,305,0,
8807	8
8809	8
9400	0,Running Processes,0x20000000,
9405	1,51,0,
9417	1,52,0,
9421	1,53,0,
9489	8
9491	8
9495	8
9499	8
9900	8
9901	8
9999	9
57600	Create a new object\nCreate a new object