1 \n 3 -------------------------------------------------------------------------------\n 5 ROBOCOPY :: Robust File Copy for Windows 7 \n------------------------------------------------------------------------------\n 12 ERROR : /SECFIX specified, without specifying WHICH security info to copy.\n 14 Quitting : /QUIT Specified on Command Line.\n 16 ERROR : No Source Directory Specified.\n 18 ERROR : No Destination Directory Specified.\n 20 NOTE : NTFS Security may not be copied - Source may not be NTFS.\n 22 NOTE : NTFS Security may not be copied - Destination may not be NTFS.\n 24 ERROR : You do not have the Manage Auditing user right. 25 ***** You need this to copy auditing information (/COPY:U or /COPYALL).\n 27 ERROR : You do not have the Backup and Restore Files user rights. 28 ***** You need these to perform Backup copies (/B or /ZB).\n 29 ERROR : Robocopy ran out of memory, exiting. 30 ERROR : Invalid Parameter #%d : "%s"\n 31 ERROR : Invalid Job File, Line #%d :"%s"\n 32 \n Started : %hs 33 \n Source %c 34 \n Dest %c 71 \n Files : 73 Exc Files : 75 Exc Dirs : 81 Options : 91 Log File : 93 Job File : 176 \n Total Copied Skipped Mismatch FAILED Extras\n Dirs :%10d%10d%10d%10d%10d%10d 177 Files :%10d%10d%10d%10d%10d%10d 178 Bytes :%10s%10s%10s%10s%10s%10s 179 Times : 181 %4ld:%02ld:%02ld 182 184 \n Speed : %10d Bytes/sec.\n Speed : %6d.%03d MegaBytes/min. 185 \n\n Ended : %hs 224 Waiting %d seconds... 225 Retrying... 227 ERROR: RETRY LIMIT EXCEEDED.\n 229 \n Monitor : Waiting for %d minutes and %d changes...\n 231 %4d mins : %d changes. 233 \n Hours : Paused at %02d:%02d until %02d:%02d... 320 \n::\n:: Robocopy Job %s\n::\n:: Created by %s on %s %s at %s\n::\n 321 \n::\n:: Source Directory :\n:: 322 \n::\n:: Destination Directory :\n:: 323 \n::\n:: Include These Files :\n::\n /IF :: Include Files matching these names 324 \n::\n:: Exclude These Directories :\n::\n /XD :: eXclude Directories matching these names 325 \n::\n:: Exclude These Files :\n::\n /XF :: eXclude Files matching these names 326 :: *.* :: Include all names (currently - Command Line may override) 327 :: :: eXclude no names (currently - Command Line may override) 328 :: :: To Be Specified on the Command Line 1101 Simple Usage :: ROBOCOPY source destination /MIR\n 1102 source :: Source Directory (drive:\path or \\server\share\path). 1103 destination :: Destination Dir (drive:\path or \\server\share\path). 1104 /MIR :: Mirror a complete directory tree.\n 1105 For more usage information run ROBOCOPY /?\n 1106 1107 **** /MIR can DELETE files as well as copy them !\n 1201 Usage :: ROBOCOPY source destination [file [file]...] [options]\n 1202 source :: Source Directory (drive:\path or \\server\share\path). 1203 destination :: Destination Dir (drive:\path or \\server\share\path). 1204 file :: File(s) to copy (names/wildcards: default is "*.*").\n 1300 ::\n:: Copy options :\n:: 1301 /S :: copy Subdirectories, but not empty ones. 1302 /E :: copy subdirectories, including Empty ones. 1303 /LEV:n :: only copy the top n LEVels of the source directory tree.\n 1304 /Z :: copy files in restartable mode. 1305 /B :: copy files in Backup mode. 1306 /ZB :: use restartable mode; if access denied use Backup mode. 1307 /EFSRAW :: copy all encrypted files in EFS RAW mode.\n 1308 /COPY:copyflag[s] :: what to COPY for files (default is /COPY:DAT). 1309 (copyflags : D=Data, A=Attributes, T=Timestamps). 1310 (S=Security=NTFS ACLs, O=Owner info, U=aUditing info).\n 1311 /DCOPY:T :: COPY Directory Timestamps.\n 1312 /SEC :: copy files with SECurity (equivalent to /COPY:DATS). 1313 /COPYALL :: COPY ALL file info (equivalent to /COPY:DATSOU). 1314 /NOCOPY :: COPY NO file info (useful with /PURGE).\n 1315 /SECFIX :: FIX file SECurity on all files, even skipped files. 1316 /TIMFIX :: FIX file TIMes on all files, even skipped files.\n 1317 /PURGE :: delete dest files/dirs that no longer exist in source. 1318 /MIR :: MIRror a directory tree (equivalent to /E plus /PURGE).\n 1319 /MOV :: MOVe files (delete from source after copying). 1320 /MOVE :: MOVE files AND dirs (delete from source after copying).\n 1321 /A+:[RASHCNET] :: add the given Attributes to copied files. 1322 /A-:[RASHCNET] :: remove the given Attributes from copied files.\n 1323 /CREATE :: CREATE directory tree and zero-length files only. 1324 /FAT :: create destination files using 8.3 FAT file names only. 1325 /256 :: turn off very long path (> 256 characters) support.\n 1326 /MON:n :: MONitor source; run again when more than n changes seen. 1327 /MOT:m :: MOnitor source; run again in m minutes Time, if changed.\n 1328 /RH:hhmm-hhmm :: Run Hours - times when new copies may be started. 1329 /PF :: check run hours on a Per File (not per pass) basis.\n 1330 /IPG:n :: Inter-Packet Gap (ms), to free bandwidth on slow lines.\n 1331 /SL:: copy symbolic links versus the target. 1401 ::\n:: File Selection Options :\n:: 1402 /A :: copy only files with the Archive attribute set. 1403 /M :: copy only files with the Archive attribute and reset it. 1404 /IA:[RASHCNETO] :: Include only files with any of the given Attributes set. 1405 /XA:[RASHCNETO] :: eXclude files with any of the given Attributes set.\n 1406 /XF file [file]... :: eXclude Files matching given names/paths/wildcards. 1407 /XD dirs [dirs]... :: eXclude Directories matching given names/paths.\n 1408 /XC :: eXclude Changed files. 1409 /XN :: eXclude Newer files. 1410 /XO :: eXclude Older files. 1411 /XX :: eXclude eXtra files and directories. 1412 /XL :: eXclude Lonely files and directories. 1413 /IS :: Include Same files. 1414 /IT :: Include Tweaked files.\n 1415 /MAX:n :: MAXimum file size - exclude files bigger than n bytes. 1416 /MIN:n :: MINimum file size - exclude files smaller than n bytes.\n 1417 /MAXAGE:n :: MAXimum file AGE - exclude files older than n days/date. 1418 /MINAGE:n :: MINimum file AGE - exclude files newer than n days/date. 1419 /MAXLAD:n :: MAXimum Last Access Date - exclude files unused since n. 1420 /MINLAD:n :: MINimum Last Access Date - exclude files used since n. 1421 (If n < 1900 then n = n days, else n = YYYYMMDD date).\n 1422 /XJ :: eXclude Junction points. (normally included by default).\n 1423 /FFT :: assume FAT File Times (2-second granularity). 1424 /DST :: compensate for one-hour DST time differences.\n 1425 /XJD :: eXclude Junction points for Directories. 1426 /XJF :: eXclude Junction points for Files.\n 1501 ::\n:: Retry Options :\n:: 1502 /R:n :: number of Retries on failed copies: default 1 million. 1503 /W:n :: Wait time between retries: default is 30 seconds.\n 1504 /REG :: Save /R:n and /W:n in the Registry as default settings.\n 1505 /TBD :: wait for sharenames To Be Defined (retry error 67).\n 1601 ::\n:: Logging Options :\n:: 1602 /L :: List only - don't copy, timestamp or delete any files. 1603 /X :: report all eXtra files, not just those selected. 1604 /V :: produce Verbose output, showing skipped files. 1605 /TS :: include source file Time Stamps in the output. 1606 /FP :: include Full Pathname of files in the output. 1607 /BYTES :: Print sizes as bytes.\n 1608 /NS :: No Size - don't log file sizes. 1609 /NC :: No Class - don't log file classes. 1610 /NFL :: No File List - don't log file names. 1611 /NDL :: No Directory List - don't log directory names.\n 1612 /NP :: No Progress - don't display % copied. 1613 /ETA :: show Estimated Time of Arrival of copied files.\n 1614 /LOG:file :: output status to LOG file (overwrite existing log). 1615 /LOG+:file :: output status to LOG file (append to existing log).\n 1616 /UNILOG:file :: output status to LOG file as UNICODE (overwrite existing log). 1617 /UNILOG+:file :: output status to LOG file as UNICODE (append to existing log).\n 1618 /TEE :: output to console window, as well as the log file.\n 1619 /NJH :: No Job Header. 1620 /NJS :: No Job Summary.\n 1621 /UNICODE :: output status as UNICODE.\n 1701 ::\n:: Job Options :\n:: 1702 /JOB:jobname :: take parameters from the named JOB file. 1703 /SAVE:jobname :: SAVE parameters to the named job file 1704 /QUIT :: QUIT after processing command line (to view parameters). 1705 /NOSD :: NO Source Directory is specified. 1706 /NODD :: NO Destination Directory is specified. 1707 /IF :: Include the following Files.\n 1801 /SD:path :: Source Directory. 1802 /DD:path :: Destination Directory. 4001 %s%s%s%s 4011 %s %s%s%s 4021 %3d.%1d%% 4031 %3d%% 4101 4102 New File 4103 4104 Same 4105 Newer 4106 Older 4107 Changed 4108 4109 4110 4111 4112 4113 4114 4115 4116 Tweaked 4117 4201 4202 lonely 4203 *MISMATCH 4204 same 4205 newer 4206 older 4207 changed 4208 attrib 4209 archive 4210 named 4211 large 4212 small 4213 too old 4214 too new 4215 4216 tweaked 4217 junction 4301 4302 New Dir 4303 4304 4305 4306 4307 4308 4309 4310 named dir 4311 4312 4313 4314 4315 4316 4317 4401 4402 *EXTRA Dir 4403 4404 4405 4406 4407 4408 4409 4410 *named dir 4411 4412 4413 4414 4415 4416 4417 4501 4502 *EXTRA File 4503 4504 4505 4506 4507 4508 4509 4510 *named file 4511 4512 4513 4514 4515 4516 4517 4601 4602 4603 4604 fix same 4605 fix newer 4606 fix older 4607 fix changed 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 9001 %d/%02d/%02d %02d:%02d:%02d ERROR %d (0x%08X) %s 9101 Accessing Source Directory 9102 Accessing Destination Directory 9103 Scanning Source Directory 9104 Scanning Destination Directory 9105 Deleting Source Directory 9106 Deleting Destination Directory 9107 Creating Destination File 9108 Creating Destination Directory 9109 Copying File 9110 Copying Directory 9111 Time-Stamping Destination File 9112 Time-Stamping Destination Directory 9113 Expanding Source Pathname 9114 Expanding Destination Pathname 9115 Deleting Source File 9116 Changing File Attributes 9117 Deleting Extra File 9118 Deleting Extra Directory 9119 Scanning Extra Directory 9120 Opening Log File 9121 Expanding Log File Pathname 9122 Copying NTFS Security to Destination Directory 9123 Copying NTFS Security to Destination File 9124 Opening Job File 9125 Getting File System Type of Source 9126 Getting File System Type of Destination 9127 Waiting for Changes in Source Directory 9128 Getting File Time