#ident  "@(#)msgfile.txt	17.4    98/08/03"
#copyright	"%c%"
#
#
InstNoSpace="\nERROR: The UnixWare Update ${UPD_NUM} could not be installed \
at this time.  This is because there is either not enough disk space or not \
enough file slots available for the options selected.  Please see the \
Release Notes for disk space requirements.\n"
#
#
SilBkupFailMsg="\nERROR : The UnixWare Update ${UPD_NUM} could not be \
installed at this time. There is not enough disk space available to backup \
the existing files upgraded by the update. The update requires \
${UPD_BKUP_KB} KB in the /var/sadm/bkup filesystem.  Please also see \
the Release Notes for disk space requirements.\n"
#
#
#SilBkupSkipMsg="\nERROR : The UnixWare Update ${UPD_NUM} could not be removed \
#since there was no backup taken during installation of the update.\n"
#
#
#SilPTFMsg="\nThe following PTFs, installed on this system, will be \
#''locked down'' by the UnixWare Update ${UPD_NUM} ${UPD_INSTRM}\n\
#The PTFs are: ${PTFList} \n\
#These PTFs will become unremoveable after the update, to prevent the system \
#from entering an undesirable state.  Please review the section entitled, \
#<Enhancements and fixes>, in the Installation and Release Notes.\n"
#
#
#UpGradePkgMsg="\nERROR: UnixWare Update ${UPD_NUM} requires that the entire \
#operating system is UnixWare 7. Update ${UPD_NUM} has detected \
#a package which has not been upgraded to UnixWare 7.\n\
#The package(s) are: ${BAD_CLASSES} \n"
#
#
UpdBaseMsg="\nERROR: The UnixWare Update ${UPD_NUM} is not compatible with \
this release of the operating system and cannot be used with this system."
#
#
#UpdBkupFailMsg="\nThe UnixWare Update ${UPD_NUM} could not be installed at\n\
#this time.  The reasons:\n\n\
#1) There is not enough disk space available to backup\n\
#   the existing files upgraded by the update.  The update\n\
#   requires ${UPD_BKUP_KB} KB in the /var/sadm/bkup\n\
#   filesystem.\n\n\
#2) There are no floppy or tape backup devices available for\n\
#   the update backup.\n\n"
#
#
#UpdBkupMsg="\nBackup in progress...\n\n\
#When done, please label the media as follows:\n\n\
#${MEDIALABEL}\n"
#
#
#UpdBkupRmMsg="If the system appears sane after a couple of days of usage,\n\
#please delete the update${UPD_INUM} backup directory to\n\
#recover additional disk space on the /var filesystem.\n\
#As the root login, execute the following command to delete\n\
#the update backup directory\n\n\
#rm -rf /var/sadm/bkup/update${UPD_INUM}\n"
#
#
#UpdError1Msg="\n\nErrors have been written to the file ${IDERR}.\n\n"
#
#
#UpdIdBldMsg="The installation cannot be completed due to an error in the\n\
#kernel reconfiguration.${UpdError1Msg}Please try the installation again.  \
#If the error occurs\nagain, please contact your Service Representative."
#
#
UpdIntrMsg="\nUnixWare Update ${UPD_NUM} Installation Terminated"
#
#
UpdNoneMsg="\nUnixWare Update ${UPD_NUM} Installation Terminated:\n\
All installed packages to be updated have already been updated.\n"
#
#
#UpdNoCmdMsg="\nThe user has aborted this installation because the cmds \
#package was not installed."
#
#
UpdNoToolsMsg="\nERROR: Kernel Tools appear to be missing.  At least one of \
the following required files is missing: idcheck, idbuild, and/or idinstall.  \
The Update cannot be installed without them."
#
#
#UpdPkgToRmMsg="\nAn overlay installation cannot be performed until \
#the following packages are removed:\n"
#
#
#UpdPTFFailMsg="\nERROR: The following PTF/PTFs installed on this system \
#must be removed prior to an overlay installation:\n\"
#The PTFs are: ${PTFListBad}"
#
#
UpdRemovalMsg="\nERROR: An attempt to remove the UnixWare Update \
${UPD_NUM}\nhas been started and was unsuccessful.\n\nTo re-install \
the update package, the current installed\nupdate package \
must be removed successfully first."
#
#
#UpdRestoreMsg="Restore in progress...\n\n\
#Please use the restore media labeled as follows:\n\n\
#${MEDIALABEL}\n"
#
#
#UpdRunLocMsg="\nScript pkg${UPD_INUM}.rc executed unsuccessfully."
#
#
#UpdShutMsg="\nStarting 'shutdown -y -g${UPD_GRACE} -i6'"
#
#
UpdVersionMsg="\nThe UnixWare Update ${UPD_NUM} version ${VERSION} Overlay \
Installation cannot be performed over the installed Update version, \
${Version}.\n\n\
The installed Update must be removed before the new update can successfully \
be installed."
#
#