This CD-ROM contains images of the diskettes used to install
and troubleshoot UnixWare 7. 

The diskette images are:
______________________________________________________________________

boot.image.C.1		UnixWare 7.0.1 Installation Diskette 1 of 2
boot.image.C.2		UnixWare 7.0.1 Installation Diskette 2 of 2
hba.image		UnixWare 7.0.1 Host Bus Adapter Diskette

These diskettes are provided with the media kit; the images
are available here in case you misplace them.
______________________________________________________________________

magic.image		Magic Diskette 

This diskette is used for installation troubleshooting and
is generally not required.  
______________________________________________________________________

netinstall.image.1	Network Installation Diskette 1 
netinstall.image.2	Network Installation Diskette 2

These diskettes are required if you want to install UnixWare 7
from a configured Install Server.
______________________________________________________________________

Creating the diskettes: UnixWare

From your UnixWare system:

1. Log onto the system as root.

2. Mount the CD-ROM. Enter:

   mount -F cdfs -r /dev/cdrom/cCbBtTlL /mnt

   where C, B, T, L are the controller, bus, target (SCSI ID), and
   logical unit number (LUN) of your CD-ROM device.
   _______________________________________________________________________

      NOTE  In many cases, you can substitute the wildcard * in place
      of the full device name; for example /dev/cdrom/*.
   _______________________________________________________________________

3. Enter:

   cd /mnt/info/images/

4. Format a blank diskette, by entering it into the primary
   diskette drive and entering:

   format -V /dev/rdsk/f03ht

   You can skip this step if the disk is already formatted.

5. Copy the desired image onto the diskette, by entering:

   dd if=<image> of=/dev/rdsk/f03ht bs=512k

   <image> is the name if the image from the list above.

6. Verify the checksum, by comparing the value listed in
   /mnt/info/images/sums.txt with the results of this command:

   sum -r /dev/rdsk/f03ht
  
   The checksums should match. If they do not, your diskette
   may be damaged. Repeat steps 4-6 with a different diskette.

______________________________________________________________________

Creating the diskettes: OpenServer

From your OpenServer system:

1. Log onto the system as root.

2. Mount the CD-ROM. Enter:

   mount -f ISO9660 -r /dev/cd0 /mnt

3. Enter:

   cd /mnt/info/images/

4. Format a blank diskette, by entering it into the primary
   diskette drive and entering:

   format /dev/rfd0135ds18

   You can skip this step if the disk is already formatted.

5. Copy the desired image onto the diskette, by entering:

   dd if=<image> of=/dev/rfd0135ds18 bs=32b

   <image> is the name if the image from the list above.

6. Verify the checksum, by comparing the value listed in
   /mnt/info/images/sums.txt with the results of this command:

   sum -r /dev/rfd0
  
   The checksums should match. If they do not, your diskette
   may be damaged. Repeat steps 4-6 with a different diskette.