This page describes how to connect synthesizers to your computer.
Your computer communicates with synthesizers and sound modules through a MIDI Controller card installed in your computer. Some MIDI Controllers connect to your computer's parallel port. The MIDI controller is sometimes called a soundcard adapter or Patch Bay adapter. Many MIDI controllers also have a built-in Internal Synthesizer, used for playing MIDI music on your computer.
The
page shows all of the MIDI controllers and Internal Synthesizers that are connected to your computer.
The MIDI controller should be connected to your synthesizer with MIDI Cables as shown in the following diagram.
The difference between a synthesizer and a sound module is, a synthesizer has a keyboard while a sound module does not. One MIDI controller can communicate with several synthesizers and sound modules connected to it through a series of MIDI Cables. The recommended way to do this with Anvil Studio is shown below.
The MIDI cables that let your computer make sounds through your synthesizer and sound modules run:
-
from the MIDI controller's MIDI OUT port to the first synthesizer's MIDI IN port, and
-
from the first synthesizer's MIDI THRU port to the next Sound Module's synthesizer's MIDI IN port, and
-
so on to the last Sound Module's MIDI IN port.
The MIDI cables that let your computer listen to and record the keys that are pressed on your synthesizer keyboard run from your synthesizer's MIDI OUT port to the MIDI controller's MIDI IN port.
Some synthesizers have a mode that causes the MIDI Out port to echo all MIDI In events as well as locally generated ones. Some synthesizer manufacturers call this MIDI Thru mode or MIDI Merge mode. If your synthesizer supports this feature, then follow the synthesizer manufacturer's directions for putting the synthesizer in this mode, and connect your MIDI equipment as shown in the diagram below:
Some synthesizers have a mode that causes the MIDI Out port to echo all MIDI In events as well as locally generated ones. Some synthesizer manufacturers call this MIDI Thru mode or MIDI Merge mode. If your synthesizers support this feature, then you can connect multiple synthesizers and sound modules to a single MIDI Controller as shown below:
Care must be taken to ensure that each keyboard connected to the same MIDI Input Controller generates notes on a different MIDI channel.
If your synthesizer does not support MIDI Thru mode, or MIDI Merge mode, the best way to connect multiple synthesizer keyboards to your computer is with multiple MIDI Controllers, as described below.
Your computer may have several MIDI controller cards installed in it. Each of these MIDI controllers has a unique name.
The
page shows all of the MIDI controllers that are connected to your computer.
If you have the Anvil Studio MIDI Manager Accessory installed, then Anvil Studio can play music over more than 16 MIDI channels through multiple MIDI Controllers and Patch Bays connected to your computer, as shown in the diagram below:
The Synths page has a check box named
Echo incoming MIDI events to all synthesizers.
This check box has no effect (and is not even visible)
if no external MIDI port is selected.
If you are only using your Sound Card's internal synthesizer and/or audio,
you can ignore the Echo check box and this section.
When Anvil Studio runs for the first time, this box is checked.
Program behavior when the Echo box is checked
During start-up the program opens MIDI OUT and MIDI IN ports,
and immediately sends LocalControlOff messages to all channels.
When not recording, it simply echoes any MIDI event to all MIDI OUT ports.
When recording, it echoes the received notes, after changing the channel
number to the active track's channel number.
Program behavior when the Echo box is NOT checked
The program only opens MIDI IN ports when recording a MIDI track,
or when Anvil Studio is turned to a page that needs to listen to MIDI events.
The program only opens MIDI OUT ports when playing one or more MIDI tracks,
or when Anvil Studio is turned to a page that needs to play MIDI notes.
Why you might want to turn this check box off
You will want to turn this check box off for any of the following reasons:
If your computer's Sound Card card is the type that cannot listen
to the MIDI port and Audio-in port at the same time.
If you do not have enough MIDI cables to connect:
the synthesizer's MIDI OUT port to the computer's MIDI IN port, and
the computer's MIDI OUT port to the synthesizer's MIDI IN port.
In this case, you need to re-connect a MIDI cable to different ports
depending on whether you are recording or playing back.
If you notice delays between the time you press a note and when
you hear the note played.
If you don't here anything when you press a key on the synthesizer
keyboard.
