CDCOPY.EXE V3.905 (C) by Markus Barth ===================================== This module allows you to write audio-tracks from CD to disk. Registered users are able to write these files to a CD-Writer. Running under Windows-95 the program only works with SCSI or ATAPI-CDROM/CD-R, which support this special mode. Using WINDOWS-NT it is possible to use the generic WIN32 interface to read the CDDA-tracks. By default, the module starts detecting an ASPI-interface. If it is not available the generic interface is used. The following hardware was tested: Adaptec 2940, Plextor CD-ROM 8XCS, RICOH 1420C, TOSHIBA 3401 PIONEER DR-U24X (Reads CDDA 3X!!!) UltraPlex (Reads CDDA 25X!!) It's fully functional under Windows-95 and Windows-NT 3.51/4.x. For both operating systems I used EZ-SCSI 4.00, 4.01 as ASPI-interfaces. The following versions were tested: WNASPI32.DLL 22528 -> EZ-SCSI 4.01 WNASPI32.DLL 21504 -> EZ-SCSI 4.00 Attention - please copy the CDCOPY.INI file to the Windows / Winnt directory! Information about the configuration and usage of the module is located in the attached helpfile (CDCOPY.HLP) Troubleshooting. The multilanguage supprt covers at the moment only menues and tooltips, helpfiles etc. are following Supported languages: English German Norwegian Swedish Coming soon: Spanish Serbian Croation Netherlands French Italian If you have any suggestions or errors reports please feel free to send me an e-mail. The actual version of CDCOPY is always available at: http://members.aol.com/mbarth2193 or http://www.actadivina.com/~cdcopy Please send feedback about supported drives! If you report any problems, please send the following information: Version of CDCOPY you use Vendor of your CDROM/CDR Operating system Which interface you use ASPI or WIN32 for Windows-NT Credits: Special thanks to A. Katranis (A.Katranis@gmx.net) for excessive testing and permanent incentive. Attention! Starting with version 3.701 I have to change the Freeware status to Shareware. Excessive bills for my internet activities doesn't allow me to improve CDCOPY for free. Answering many e-mails, updates etc. are too expensive. So if you want to make the CDCOPY-project go further send 20 US $ to: Markus Barth Holzmarkt 2 52511 Geilenkirchen (Germany) Profit-making organizations may use this software only with explicit written permission with payment to the author. M. Barth - mbarth2193@aol.com mbarth@home.ivm.de Versions: 3.905 - MP3 decompression, CD-writing from MP3-format Support for Enhanced CDs, improved cache management for Windows-NT 3.900 - Multilanguage support, replace by by underscore error jitter correction with ATAPI drives 3.808 - Save default MP3 Tag information, CDDB -> CDPLAYER.INI 3.807 - TOMPG support, error Toshiba speed setting 3.806 - conversion from the CDDB format to CSV error l3codec compression 3.805 - sound normalization, delete CDDB batch files direct L3Codec support, speed up Xing encoding 3.804 - minor corrections 3.803 - Writing lyrics to MP3-WAV, MPA, MP3-file, Alert function improved Xing encoding speed 3.802 - Batchmdoe for CDDB queries, invert selection support for lyricsserver www.lyrics.ch 3.800 - Batchmdoe for several drives, pregab setting 3.711 - minor error corrections 3.710 - Playlistgeneration, MITSUMI CD-R, alternate Matsushita mode, error proxyserver, time information, filename template 3.709 - minor error corrections, and enhancements 3.706 - Extended ATAPI-support - many new drives, tracktime Support for Xing MPEG Encoder, Proxyserver support, 3.703 - Albumname, http-port modification 3.702 - Error Toshiba-Powermode Some error-corrections 3.701 - http-protocoll for cddb access, quickmode option powermode, speed information, advanced options 3.608 - Supress 0 samples, SCSI-Info, error NEC drives, minor enhancements, speedselection, support for IBM, Cyber drives 3.606 - error corrections 3.605 - RICOH MP drives, MP3-ID TAG, DAO-CUE-Sheet generation 3.603 - Corrected some bugs 3.602 - Jitter correction using WIN32 interface, statusinformation during CDDB communication 3.600 - Writing of MP3-WAV files through L3CODEC of Fraunhofer Inst., Path for CDDB-files, Options "Save tracknumber", "Save artist" 3.505 - Submission of new CD-information to CDDB 3.502 - Buffered reading for some drive-types fixed some minor bugs MP3CompPath - variable in CDCOPY.INI 3.500 - Read artist, title etc. from internet-database CDDB, support for ATAPI-interface for Windows-95, support for MATSHITA/PANASONIC drives. 3.001 - Call MP3-Compressor to generate MP3 - format 3.000 - Save options Jitter correction for some drives 2.005 - Select/Deselect whole CD, retry failed reads speed up reading ASPI-interface for some drive-types 2.003 - Corrected some bugs 2.002 - Select down to frame using track excerption 2.001 - Support for TEAC (SCSI) drives 2.000 - Support of MPG format (MPEG 1 layer 2) Extreme small files and extreme slow when packing Best MPG - Player : MAPLAY http://www-inst.eecs.berkeley.edu/~ctsay/mp2win32.html 1.700 - Added space information for tracks 1.604 - Corrected error reading non-buffered mode using generic interface 1.603 - Added support for HITACHI drives 1.602 - Corrected some bugs 1.600 - Support for RICOH drives (ASPI) 1.500 - Choice of CDROMs/CDRs using a combobox and buffered reading using generic interface 1.400 - Save tracks using title of CDPLAYER.INI or chosen name 1.300 - Added tooltips, nicer buttons Dialog to save a part of a track 1.200 - Saving soundfiles as WAV, AU or RAW Classic-mode (Writing subsequent tracks of live or classic-CD in one file without pause) 1.100 - IDE-Support using generic WIN32 interface 1.005 - Support for HP-Writer 1.004 - Overread defect sectors Show content of CDPLAYER.INI if available