2	DHCP Manager
100	Superscopes - %1
101	Create Superscope - %1
102	This operation will delete superscope %1 without deleting any child scopes.  Are you sure you want to delete superscope %1?
103	The superscope %1 already exist.
104	Server Properties - %1
200	Boot Image
201	File Name
202	File Server
203	BOOTP Properties
10004	Interrupted system call.
10009	Bad file number.
10013	Access denied.
10014	Bad address.
10022	Invalid argument.
10024	Too many open files.
10035	Operation would block.
10036	Operation now in progress.
10037	Operation already in progress.
10038	Socket operation on non-socket.
10039	Destination address required.
10040	Message too long.
10041	Protocol is wrong type for socket.
10042	Bad protocol option.
10043	Protocol not supported.
10044	Socket type not supported.
10045	Operation not supported on socket.
10046	Protocol family not supported.
10047	Address family not supported by protocol family.
10048	Address already in use.
10049	Can't assign requested address.
10050	Network is down.
10051	ICMP network unreachable.
10052	Network was reset.
10053	Software caused connection abort.
10054	Connection reset by peer.
10055	No buffer space is supported.
10056	Socket is already connected.
10057	Socket is not connected.
10058	Can't send after socket shutdown.
10059	Too many references.
10060	Connection timed out.
10061	Connection refused.
10062	Too many levels of symbolic links.
10063	Name too long.
10064	Host is down.
10065	Host is unreachable.
10066	Directory not empty.
10067	EPROCLIM returned.
10068	EUSERS returned.
10069	Disk quota exceeded.
10070	ESTALE returned.
10071	The object is remote.
10091	System not ready.
10092	Version is not supported.
10093	Not initialized.
10101	Disconnected.
11001	Host not found.
11002	Try again.
11003	Non-recoverable error.
11004	No data record available.
32768	Configure the Dynamic Host Configuration Servers
32769	Run the test routines in DHCPDLL.DLL
32770	Create a new DHCP scope for a sub-net
32771	Edit the properties associated with the current scope
32773	Add a DHCP host server to the list of DHCP servers
32774	Incorporate the highlighted host into the selected scope
32775	Remove the highlighted host from the selected scope
32776	Edit the global client configuration options
32777	Edit the configuration options for clients of this scope
32778	Edit the definitions of option types
32779	Review address allocation policy for the selected scope.
32780	Review current address lease information for the selected scope
32781	Define and maintain default values and option types
32782	Provide textual names for sub-nets (scopes)
32783	Define user names for sub-net identifiers
32784	Maintain the list of recognized vendors
32785	Add reserved clients to this scope
32786	Remove current server support for this scope
32787	Delete the currently selected scope
32788	Activate or de-activate the scope on its server
32789	 - 
32791	Remove the currently selected DHCP server from the list
32793	Show or hide the status bar
32795	Search for help on a specific item
32797	Edit the properties of the selected DHCP server
32799	Edit the superscopes of the selected DHCP server
57344	DHCP Manager
57345	Ready
57653	Move the split bar
57664	Display program information, version number and copyright
57665	Exit this application and save the settings
57666	Display help contents
57668	Show how to use the help engine
57680	Switch to the next window pane
57681	Switch back to the previous window pane
59001	Pad
59002	Pad byte generated to align other data?
59003	End
59004	Indicates end of options in DHCP packet
59005	Subnet Mask
59006	Subnet mask in network byte order
59007	Time Offset
59008	UCT offset in seconds
59009	Router
59010	Array of router addresses ordered by preference
59011	Time Server
59012	Array of time server addresses, by preference
59013	Name Servers
59014	Array of name servers, by preference
59015	DNS Servers
59016	Array of DNS servers, by preference
59017	Log Servers
59018	Array of MIT_LCS UDP log servers on subnet
59019	Cookie Servers
59020	Array of cookie servers, RFC 865
59021	LPR Servers
59022	Array of RFC 1179 servers, by preference
59023	Impress Servers
59024	Array of Imagen Impress servers
59025	Resource Location Servers
59026	Array of RFC 887 ResLoc servers on subnet, pref
59027	Host Name
59028	Host name for client, RFC 1035 character set
59029	Boot File Size
59030	Size of boot image file in 512-octet blocks
59031	Merit Dump File
59032	Path name for crash dump file
59033	Domain Name
59034	Domain name for client resolutions
59035	Swap Server
59036	Address of client's swap server
59037	Root Path
59038	Path name for client's root disk, char set NVT ASCII
59039	Extensions Path
59040	tftp file for option extensions
59041	IP Layer Forwarding
59042	Dis/enable IP packet forwarding on this client
59043	Non-local Source Routing
59044	Dis/enable non-local datagrams
59045	Policy Filter Masks
59046	Destination/mask IP address pairs to filter source routes
59047	Max DG Reassembly Size
59048	Maximum size datagram for reass. by client; max 576
59049	Default Time-to-live
59050	Default TTL for client's use on outgoing DGs
59051	Path MTU Aging TO
59052	TO in secs for aging Path MTU values; RFC 1191
59053	Path MTU Plateau Table
59054	MUT discovery sizes, sorted by size, all >= 68
59055	MTU Option
59056	MTU discovery size, >= 68
59057	All subnets are local
59058	Client assumes that all subnets are local v/v MTU
59059	Broadcast Address
59060	Broadcast address
59061	Perform Mask Discovery
59062	Client should use ICMP for subnet mask discovery
59063	Mask Supplier Option
59064	Client should respond to subnet mask requests via ICMP
59065	Perform Router Discovery
59066	Client should solicit routers using RFC 1256
59067	Router Solicitation Address
59068	Address to use for router solicitation
59069	Static Route Option
59070	Destination/router address pairs, in priority order
59071	Trailer Encapsulation
59072	Client should negotiate use of trailers (RFC 983)
59073	ARP Cache Timeout
59074	T/O in seconds for ARP cache entries
59075	Ethernet Encapsulation
59076	0=>client should use ENet V2; 1=> IEEE 802.3
59077	Default TTL Option
59078	Default TTL
59079	Keepalive Interval
59080	K/A T/O in seconds
59081	Keepalive Garbage
59082	Send garbage octet
59083	NIS Domain Name
59084	Name of Network Information Service domain
59085	NIS Servers
59086	Addresses of NIS servers on client's subnet
59087	NTP Servers
59088	Addresses of Network Time Protocol servers
59089	Vendor Specific Info
59090	Embedded vendor-specific options
59091	WINS/NBNS Servers
59092	NBNS Address(es) in priority order
59093	NetBIOS over TCP/IP NBDD
59094	NetBIOS over TCP/IP NBDD address(es) in priority order
59095	WINS/NBT Node Type
59096	0x1 = B-node, 0x2 = P-node, 0x4 = M-node, 0x8 = H-node
59097	NetBIOS Scope ID
59098	NetBIOS over TCP/IP Scope ID
59099	X Window System Font
59100	Array of X Windows font servers
59101	X Window System Display
59102	Array of X Windows Display Mgr servers
59103	Lease
59104	Client IP address lease time in seconds.
59105	Renewal (T1) Time Value
59106	Time between addr assignment to RENEWING state
59107	Rebinding (T2) Time Value
59108	Time from addr assignment to REBINDING state
59109	NIS+ Domain Name
59110	The name of the client's NIS+ domain.
59111	NIS+ Servers
59112	A list of IP addresses indicating NIS+ servers.
59113	Enable NBT hostname resolution
59114	0==off   1==on
59115	Enable gethostbyname() WINS resolution
59116	0==off   1==on
59117	Hostname resolution order
59118	0==hosts,1==dns,2==hosts->dns,3==dns->hosts
59119	Domain suffix search order
59120	List of domain suffixes in order (6 max)
59121	Enable WINS proxy agent
59122	0==off   1==on
59123	Boot Server Host Name
59124	TFTP boot server host name
59125	Bootfile Name
59126	Bootfile Name
59127	Mobile IP Home Agents
59128	Mobile IP home agents in priority order
59393	Show or hide the status bar
61184	Change the window size
61185	Change the window position
61186	Reduce the window to an icon
61187	Enlarge the window to full size
61188	Switch to the next document window
61189	Switch to the previous document window
61190	Close DHCP Manager and save the settings
61202	Restore the window to normal size
61203	Activate Task List
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61446	an unnamed file
61457	&Hide
61472	No error message is available.
61473	An unsupported operation was attempted.
61474	A required resource was unavailable.
61475	Out of memory.
61476	An unknown error has occurred.
61588	Linked %s
61589	Unknown Type
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61707	System registry entries have been removed and the INI file (if any) was deleted.
61708	Not all of the system registry entries (or INI file) were removed.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61720	Please enter a date and/or time.
61721	Please enter a currency.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61829	%1\nUnable to register document.\nThe document may already be open.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61856	No error occurred.
61857	An unknown error occurred while accessing %1.
61858	%1 was not found.
61859	%1 contains an invalid path.
61860	%1 could not be opened because there are too many open files.
61861	Access to %1 was denied.
61862	An invalid file handle was associated with %1.
61863	%1 could not be removed because it is the current directory.
61864	%1 could not be created because the directory is full.
61865	Seek failed on %1
61866	A hardware I/O error was reported while accessing %1.
61867	A sharing violation occurred while accessing %1.
61868	A locking violation occurred while accessing %1.
61869	Disk full while accessing %1.
61870	An attempt was made to access %1 past its end.
61872	No error occurred.
61873	An unknown error occurred while accessing %1.
61874	An attempt was made to write to the reading %1.
61875	An attempt was made to access %1 past its end.
61876	An attempt was made to read from the writing %1.
61877	%1 has a bad format.
61878	%1 contained an unexpected object.
61879	%1 contains an incorrect schema.
61888	pixels
62000	This is a dummy message used as an anchor for the error messages
62001	Insufficient memory available to perform requested operation.
62002	Invalid server/host name.
62003	The named server/host has already been added to the list of DHCP servers.
62004	The given functionality is not currently supported.
62005	The scope specified is already being accessed
62006	The identifier of an option type cannot be changed.
62007	The given option identifier is already in use.
62008	Starting address is invalid for this range
62009	Ending address is invalid for this range.
62010	Internal error in updating the dialog
62011	The IP address range overlaps a current defined range.
62012	The IP address range is not a subset of the overall range.
62013	The IP address range given is invalid.
62014	Nothing has changed on the dialog.
62015	Dialog information was changed.  Do you want to keep the changes?
62016	No primary server/host has been selected.
62017	An internal application error has occured.
62018	Option value data structure is invalid
62019	The name of the scope must be specified.
62020	A comment must be provided for the scope.
62021	The option name is required.
62022	Binary data editing not yet supported 
62023	Array editing is not yet supported
62024	Numeric data is invalid.
62025	The subnet mask is not valid.
62026	The option was not found for deletion.
62027	System error %ld occurred
62028	The date given is invalid.
62029	Unique Client Identifier string is invalid.
62030	The client name is invalid.
62031	The client IP address is invalid.
62032	The client IP address of an existing client cannot be changed.
63000	This is a dummy entry corresponding to the first  DHCPDLL.DLL error message
63001	Unable to connect to the host/server name given
63002	There is no current connection to the host/server
63003	The given IP address is invalid
63004	Information for this host is unavailable
63005	This scope has an internal data conflict error.
63007	NetBIOS Names are not valid here.  Try using a DNS name or IP address.
63008	Are you sure you want to delete the scope?
63009	\nUnable to connect to DHCP server at %s.\nServer may be down, or DHCP service not started.\n\nDo you want to remove it from the list of DHCP servers?
63010	Are you sure you want to remove %s from the list of DHCP servers?
63011	The scope has already been deleted by another process.
63012	Warning:  In order for WINS to function properly,  you must now set option 46(WINS/NBT Node Type), and set it to either 0x02(P-Node), 0x04(M-Node) or 0x08(H-Node).
63013	The DHCP server service is not running on the target machine.
63014	Value out of range.
63015	You must specify a lease duration
63016	The IP range has been changed, but not yet saved.   Continuing will discard the changes.  Proceed?
63017	The option ID must be between 0 and 255.
63018	This scope may have active clients.  Delete scope anyway?
63019	Unable to determine number of available leases.
63020	This scope is currently active.  Are you sure you want to delete the scope?
63021	Are you sure you want to delete the lease?
63022	This function is not supported on the DHCP server you are administering.  You must upgrade this DHCP server's software to complete this function.
64000	Decimal
64001	Hex
64002	String
64003	IP Address
64004	Boolean
64005	FALSE
64006	TRUE
64007	** invalid **
64008	Global Option Settings
64009	%s to %s
64010	<INV>
64011	Address %s
64012	%03.3d -- %s
64013	DHCP Options: Global
64014	DHCP Options: Scope
64015	DHCP Options: Reservation
64016	Scope Properties
64017	Create Scope
64018	Byte
64019	Word
64020	Long
64021	Long Integer
64022	IP Address
64023	String
64024	Binary
64025	Encapsulated
64026	Change Option Type
64027	Add Option Type
64028	[%s] %s
64029	Server %s
64030	Scope
64031	Global
64032	DHCP Standard Options
64034	S
64035	G
64036	00112233445566778899aAbBcCdDeEfF
64037	Default Option Settings
64038	(Option %ld)
64040	Never
64041	January,February,March,April,May,June,July,August,September,October,November,December
64042	Add Reserved Clients
64043	Client Properties
64044	 
64045	Reservation
64046	&Close
64047	Reservation
64048	Obtaining client information from DHCP server
64049	Performing Client Lease Review
64050	Getting scope definitions on selected host
64051	&Activate
64052	De&activate
64053	Reservation in use
64054	Infinite
64055	Not Active
64056	Getting option definitions
64057	The scope has been successfully created, but has not yet been activated.\n\nActivate the new scope now?
64058	&Add
64059	Cancel
64060	Close
64061	OK
64062	Getting lease information for this scope
64063	Adding client to the current scope
64064	Updating client information
64065	Storing default option values
64066	Creating scope
64067	%s (%d%%)
64068	(Local)
64069	*Local Machine*
64070	Checking for inconsistencies in the database
64071	Adding missing database entries
64072	The database is consistent.
64073	<None>
64074	Please enter a valid integer from %d to %u
64075	Connecting to DHCP server...
64076	N/A
64077	The Unique Identifier you have entered may not be correct.  Do you want to use this Identifier anyway?
64078	Getting superscope definitions on selected host
64079	Updating superscope definitions on selected host
64080	Getting properties for selected DHCP server
64081	Updating properties for selected DHCP server
65000	This is the last possible message number +1