Note For a demonstration of the following steps, click the Show Me button.

1. On the Main toolbar, click the Fit button.
   

2. On the Draw toolbar, click the Line/Arc Continuous button.
   

3. On the ribbon bar in the Line Color list, click dark green to change the line color.
   

4. On the ribbon bar in the Line Width list, select .35 mm to change the line width.
   

5. Towards the top center of the document, click and move the cursor to the right to place a 30 inch horizontal line.

6. Click to finish the line.

7. Place a line that is 24 inches at a -45░ angle.

8. Move the cursor down and place a 30 inch vertical line.

9. Move the cursor to the left until the line that you are placing is aligned with the top left line, click to place a horizontal line.

10. Click the top left line to complete the drawing of the corner desk.

11. Draw a 30 inch vertical line from the top left of the corner desk.

12. Draw a 30 inch horizontal line to the right.

13. Complete the line by drawing a vertical line to connect to the corner desk.

14. Draw a 48 inch wide by 30 inch high desk that connects to the right of the corner desk.

15. On the Draw toolbar, click the Select Tool.
    

16. Click and drag to select the three sections of desks.

17. On the Main toolbar, click the Change button.
    

18. On the Change toolbar, click the Move/Copy button.
    

19. Select the lower left corner of the desk and move the mouse cursor to place the desk at the left bottom of the room on the right.