Choosing the Right Connection

You can choose the right connection for your situation by mathematically figuring the average size of your content files, the amount of time files of that size take to send, and the number of simultaneous users you want to support. This topic shows you how to perform the calculations necessary to select the right connection. For convenience, a utility is available to do these calculation for you.

If you want to calculate the above server performance statistics for your particular server configuration simply go to Calculating Connection Performance, enter your values, and click the Calculate button.

Important   This utility includes server-side scripts and uses Active Server Pages technology. If your server is unavailable, this form may not appear or may function improperly.

Determining Connection Type Based on File Transmission Speed

You can select a connection type based on the size of files you will be sending to users and the amount of time users are willing to wait to receive a file. Generally, HTML text pages should load within five seconds. External files, such as graphics or video, should load within 30 seconds. If you will be using modems, be aware that you must also factor in the time it takes for a data packet to make the round trip between the user and your server. Modem connections take nearly one second per connection, a significant amount of time. Faster leased-line connections take 0.1 or 0.2 seconds, which is not significant and therefore not included in calculations.

1. Multiply 8 bits per character X 80 characters per line X 66 lines per page = 42,240 bits per page.
2. For every 8 bits of data transferred, there are 4 bits of overhead. Multiply 42,240 bits per page X 1.5 bits used to transfer 1 bit of data = 63,360 bits per page transferred.

Note   This calculation assumes a solid text page with no graphics, most typically seen when converting text documents to HTML format. The typical home page is generally much less text intensive and is probably closer to 24,000 bits per page including overhead. However, the typical home page may also contain one or more graphics files, each requiring connections between the client and the server.

1. Divide the connection speed per second by the estimated file size to get the following results:

Number of Pages Transmitted Per Second

Connection Type	Pages Transmitted
Dedicated PPP/SLIP	0.3 to 0.6
56K (Frame Relay)	0.9
ISDN (using PPP)	1.7
T1	24
T3	710

2. For modems, add additional transmission time of one second to open the connection. This means that a modem would take from 2.5 to 4 seconds to transfer one page, depending on the modem speed.

1. Divide the 1,540,000 bps connection speed by the 12 bits per byte transmitted to equal 125 KB per second transmitted.
2. Multiply 125 KB per second X 86,000 seconds per day = 10,777,994 KB per day transmitted.
3. Divide 10,777,994 KB per day by (1024 KB/MB X 1024 MB/GB) = 10.3 GB per day transmitted.
4. Assuming an average file size (text and graphics) of 25 Kb, divide 10,777,994 KB by 25 KB = 431,000 “hits” per day.

Note   This calculation assumes a T1 connection dedicated to only your Web server.

1. Assuming that you want to stay within the five-second transmission time for a page of text, and assuming a text file size of 63,360 bits transmitted for the user to receive the page, divide the 63,360 bits by 5 seconds = 12,672 bits per second per user.
2. Divide the connection speed by the bits per second per user. For instance, for a T1 line, divide 1,540,000 bps by 12,672 bps per user = 121 simultaneous users on a T1 connection.

Note   This assumes text-only pages with no graphics and a complete page transmitted within five seconds. If more users attempt to connect, they are not refused, but transmission speed of files may drop well below the five-second recommended time. The following table provides guidelines for the number of users expected to be supported by a connection type.


Number of Simultaneous Users Supported

Connection Type	Users Supported
Dedicated PPP/SLIP	2–3
56K (Frame Relay)	10–20
ISDN (using PPP)	10–50
T1	100–500
T3	5000+

© 1997 by Microsoft Corporation. All rights reserved.