; Novell, Inc.: UNATTEND.TXT for Windows NT 4.0 ; ; The following is the version info for Novell. Inc. ; ;VeRsIoN=v4.10 Novell Client Install for Windows NT (970127) ;CoPyRiGhT=copyright 1992-1997, by Novell, INC. All rights reserved. ; Microsoft Windows NT Workstation Version 4.0 and Windows NT Server Version 4.0 ; 1994, 1995 Microsoft Corporation. All rights reserved. ; Novell IntranetWare Client Services for NT (Workstation and Server) ; 1996, 1997, Novell, Inc. All rights reserved. ; This file is an edited version of the Windows NT default UNATTEND.TXT file. It is a ; Windows NT .INF file and conforms to the established standards that govern this file ; type. It contains settable parameters for all of the Novell IntranetWare Client Services ; parameters on the property pages in the Windows NT Network control panel. ; There are sections in this file that belong to the Microsoft Windows NT 4.0 product. ; It may or may not contain the correct or proper information necessary for the working, ; valid installation of Windows NT 4.0 on a workstation. ; The UNATTEND.TXT shipped by Novell, Inc. contains examples of parameters and their settings in ; the Microsoft Unattended Section where appropriate. However, Novell, Inc. does not guarantee a ; successful installation of Windows NT 4.0 on any workstation. Please refer to the default ; UNATTEND.TXT file that shipped with Windows NT 4.0 and the Microsoft Windows NT OEM ; Preinstallation Kit (OPK) for further instructions. ; Contents ; Appendix i : Why Is This Document Important? ; I. The Microsoft Windows NT OEM Preinstallation Kit ; II. Introduction to Unattended Installation and its file: UNATTEND.TXT. ; A. The Objective of the UNATTEND.TXT file ; B. Requirements for the Unattended Installation. ; C. Property Pages and Their Parameters ; III. Trademark, Patent, Liability Information ; Contents ; Appendix i : Why Is This Document Important? ; This document is important because other than the information contained in ; the Help screens of the Novell IntranetWare Client 4.10 Installation for Windows NT, there is ; no other readily-available sources of information on this process. Reading these sections ; will allow you to understand what the installation is, how it works, the various types of ; installs and the options that are available. It provides information on what the UNATTEND.TXT ; file contains and how to edit it to conform to your system's configuration. ; I. The Microsoft Windows NT OEM Preinstallation Kit ; When this documentation was created, only the Beta Version of the OEM Preinstallation Kit ; was available from Microsoft Corporation. Windows NT 3.51/4.0 does ship with a default ; UNATTEND.TXT file, but the 4.0 UNATTEND.TXT file is not as complete as the one that shipped ; with Windows NT 3.51. It is recommended that you review the Windows NT 3.51 UNATTEND.TXT ; as an additional reference. ; II. Introduction to Unattended Installation and its file: UNATTEND.TXT. ; The UNATTEND.TXT contains answers to possible installation process questions. These ; parameters configure installation options and pre-configure answers to the dialogs that ; may pop up during the installation. These parameters silence the questions asked during ; both an NT Unattended and a Novell IntranetWare Client SETUPNW.EXE installation. ; The easiest way to see how this works is to install the Novell IntranetWare Client on one ; Windows NT workstation and to watch what dialog boxes and questions appear. There is ; a HELP option on each of those screens for your reference. After you have seen it once ; you know which queries may need to be provided with a different default value because of ; your particular network configuration, it is easy to understand how the UNATTEND.TXT file ; is laid out. ; Each section contains a TITLE, an EXPLANATION, and the correct syntax of the ; parameter. It is possible to edit the UNATTEND.TXT file and remove all of the ; explanation comments. ; A. The Objective of the UNATTEND.TXT file ; The objective of an unattend install is to have all necessary parameters, their values, ; and answers to the dialogs that may pop up during an install pre-configured. This is done by ; editing the Novell IntranetWare Client's UNATTEND.TXT file, ; These parameters silence the questions asked during both an NT Unattended installation ; and a Novell IntranetWare Client SETUPNW.EXE installation. ; Because complete standardization across many LAN/WAN environments is not always possible, ; more than one Unattended file may be created, each with specific parameter settings that ; will match whatever configurations for those particular clients. ; Once the Novell IntranetWare Client directory and file structure is in place within the Windows NT ; structure, and the UNATTEND.TXT contains the parameters and their values necessary for a ; particular configuration, it need not be changed again. If new parameters become available, ; they can easily be added to the UNATTEND.TXT file. What this does is make the ability to ; update the Win NT clients manageable. ; B. Requirements For The Unattended Installation ; Although the concept of an unattended installation and a text file containing the ; default parameters for that install is a simple one, the issue that is not easily ; addressed is the types and number of network configurations that a corporation may ; have or a network manager must maintain. Because of this, we have tried to provide ; a systematic approach to this issue. ; The approach is, 1. Determine the criteria a workstation must meet in order to be upgraded using ; the SETUPNW.EXE /U=UNATTEND.TXT and/or /ACU method. 2. Identify the network configuration that this ; workstation exists in and what issues have to be resolved in conjuction with that configuration. ; If the workstation is in a domain or a group, how does that change the install? ; C. Property Pages and their Parameters ; The information format for each Property Page and its parameters are: ; Property Page ; Parameter ; Values: ; Default: ; Range/Valid: ; Parameter Dependencies: ; Conditions: ; Brief description of the function of this parameter ; Please refer to the Windows NT on-line documentation for an indepth discussion of property pages. ; Property Page: Novell IntranetWare Client 4.10 for Windows NT is one of the installed network ; services and its property pages are found under "Network Services." The name of the property ; page is the name of the tab that you see under the "Novell IntranetWare Client Services ; Configuration" dialog. ; Parameter: Generally a parameter name contained in the UNATTEND.TXT file is a shortened version ; of its complete name that is displayed under Windows NT. The PARAMETER will show its shortened ; and exact name. ; Values: The numbers and characters that are valid for this parameter. ; Default: The default value of a parameter. ; Range/Valid: The range a value may have, or what characters are valid or invalid. ; The range may be Yes or No, or 0 to 255. Invalid values are generally reserve words or ; characters. ; Parameter Dependencies: Some parameters are not avalilable until another parameter ; is set to "Yes." For example, Bindery_connection is not available until Login_to_Server is set ; to "Yes." ; Conditions: If there is another parameter, or condition that affects the parameter, ; it will be listed here. For example, if Login_To_Tree is set to "Yes," then Login_To_Server is ; not available. ; A brief description of the parameter's function will be given, for more detailed information ; please refer to the appropriate on-line Help section. ;!ParameterName_OverWriteValue = Yes or No ; Each parameter has an option that gives additional flexibility for writting the parameter ; data to the registy. If the ParameterName_OverWriteValue = Yes then the value is written to ; the registry. If the _OverWriteValue = No then the new value is only written to the registry ; if the registry does not contain any data. The default behavior for writting these variable to ; the registry is the same as setting the _OverWriteValue = No. ; Values: The valid values are Yes or No for this parameter. ; Default: The default behavior is this parameter is not set or No. ; III. Trademark, Patent, Liability Information ; Trademarks ; ; Novell Trademarks ; ; Client 32 is a trademark of Novell, Inc. ; GroupWise is a trademark of Novell, Inc. ; Internetwork Packet Exchange and IPX are trademarks of Novell, Inc. ; IPX/SPX is a trademark of Novell, Inc. ; LAN WorkPlace is a registered trademark of Novell, Inc. in the ; United States and other countries. ; NE2000 is a trademark of Novell, Inc. ; NetWare is a registered trademark of Novell, Inc. in the United States ; IntranetWare is a registered trademark of Novell, Inc. in the United States ; and other countries. ; NetWare Application Notes is a registered trademark of Novell, Inc. ; NetWare Client is a trademark of Novell, Inc. ; IntranetWare Client is a trademark of Novell, Inc. ; NetWare DOS Requester is a trademark of Novell, Inc. ; NetWare/IP is a trademark of Novell, Inc. ; NetWare Loadable Module and NLM are trademarks of Novell, Inc. ; ; Novell is a registered trademark of Novell, Inc. in the United ; States and other countries. ; Novell DOS is a trademark of Novell, Inc. ; Open Data-Link Interface and ODI are trademarks of Novell, Inc. ; Sequenced Packet Exchange and SPX are trademarks of Novell, Inc. ; Virtual Loadable Module and VLM are trademarks of Novell, Inc. ; ; Third-Party Trademarks ; ; AST is a registered trademark of AST Research, Inc. COMPAQ is a registered trademark of Compaq Computer ; Corporation. Microsoft is a registered trademark of Microsoft Corporation. MS-DOS is a registered trademark ; of Microsoft Corporation. Network Drive Interface Specification and NDIS are trademarks of PC-PlusCommunications LP. ; Windows is a registered trademark of Microsoft Corporation.Windows 95 is a registered trademark of Microsoft Corporation. ; ; Disclaimer ; ; Novell, Inc., makes no representations or warranties with respect to any NetWare or IntranetWare software, and specifically ; disclaims any express or implied warranties of merchantability, title, or fitness for a particular purpose. ; Distribution of any NetWare or IntranetWare software is forbidden without the express written consent of Novell, Inc. Further, ; Novell reserves the right to discontinue distribution of any NetWare or IntranetWare software. Novell is not responsible for ; lost profits or revenue, loss of use of the software, loss of data, costs of recreating lost data, the cost ; of any substitute equipment or program, or claims by any party other than you. ; Novell strongly recommends a backup be made before any software is installed. Technical support for this ; software may be provided at the discretion of Novell. ; ---------- THIS BEGINS THE WORKING SECTION OF NOVELL'S UNATTEND.TXT FILE ------------------- ; Microsoft Unattended Section ; This section belongs to the Microsoft Windows NT 4.0 product. It may or may not contain ; the correct or proper information necessary for you to correctly install Windows NT 4.0 on your ; workstation. Novell, Inc., has provided examples where appropriate in these sections. ; However, Novell, Inc. does not guarantee a successful installation of Windows NT 4.0 ; on your workstation. Please refer to the default UNATTEND.TXT file and the Microsoft ; Windows NT OEM Preinstallation Kit (OPK) for further instructions. [Unattended] ConfirmHardware = No NtUpgrade = No Win31Upgrade = No TargetPath = WinNT40 OverwriteOemFilesOnUpgrade = No OemPreinstall = Yes NoWaitAfterTextMode = 1 [MassStorageDrivers] [DisplayDrivers] [KeyboardDrivers] [PointingDeviceDrivers] [OEMBootFiles] [OEMAds] ;Banner = "Windows NT Sample OEM Banner" ;Logo = oemlogo.bmp ;Background = oembgnd.bmp [GuiUnattended] ;TimeZone = "(GMT-07:00) Mountain Time (US & Canada)" [UserData] ;FullName = "Example Name" ;OrgName = "Example Name" ;ComputerName = "Workstation One" [Display] ConfigureAtLogon = 1 ;BitsPerPel = 8 ;XResolution = 1024 ;YResolution = 768 ;VRefresh = 60 ;Flags = ;AutoConfirm = 1 ; Novell Modified Section ; These sections of the UNATTEND.TXT file are the ones that the Novell IntranetWare Client 4.10 ; Installation either modifies for its own use or are included in the UNATTEND.TXT file ; that ships with the Novell IntranetWare Client 4.10 Installation. [NetWork] DetectAdapters="" InstallAdapters=SelectedAdapterList InstallProtocols=SelectedProtocolList InstallServices=ServicesList JoinWorkgroup=WORKGROUP ; Join Domain=DOMAIN [SelectedProtocolList] TC = TCPIPParameters NWLNKIPX = NWLinkIPXParams [SelectedAdapterList] ; NE2000=NE2000AdapterParameters ; The [ServicesList] section of the UNATTEND.TXT file is used to specify NT Services that can ; be installed with Windows NT. The parameter, NWFS = is used to designate that the Novell ; IntranetWare Client Services for NT will be installed. The Novell IntranetWare Client is an NT Network ; Service and the syntax of the parameter is ; NWFS = NovellNetWareClientParameters, ; Windows NT has designated the directory structure as: \$OEM$\NET\NTCLIENT\I386. ; This directory must be created inside the NT Install Directory structure on the NT IntranetWare ; Distribution Share. The Novell Client installation files and directories should be copied ; into this directory. (See Section II of the Contents for specific installation instructions). [ServicesList] NWFS = NovellNetWareClientParameters, \$OEM$\NET\NTCLIENT\I386 [NE2000AdapterParameters] ;NE2000 = "Novell NE2000 Adapter" ;InterruptNumber = 3 ;IOBaseAddress = 768 ; Optional: ; !AutoNetInterfaceType = 0 | 1 | 2 | 3 |... ; !AutoNetBusNumber = 0 [TCPIPParameters] ;DHCP = Yes ;DNSServer = 1.1.1.1 ;DNSName = NameServer [NWLinkIPXParams] ; ; ; This section of the UNATTEND.TXT file contains information specific to the Novell IntranetWare ; Client 4.10 (c). It includes all of the Novell IntranetWare Client parameters necessary for ; it to function in the Windows NT environment. Each group in this file contains a ; property page, its parameters, what control on that property page the parameter represents, ; its default values, the valid/range of values that parameter can accept, if it is a required ; parameter and a brief description of that parameter's function. An general overview of the ; UNATTEND.TXT file is located in Section II of the Contents at the beginning of this file. [SetupNWInstallOptions] ; This section of the inf file is used by the Novell SetupNW.exe Client installation ; program. These parameters configure the installation dialogs displayed to the user. ; The DisplayInitialScreen parameter can be used to customize the installation. If this parameter ; is set to "YES" then the initial Welcome or ACU upgrade screen is displayed to the user. ; If this parameter is set to "NO" then the Client installation silently starts. !DisplayInitialScreen = NO ; The AskReboot parameter is also used to customize the installation. If this parameter ; is set to "YES" then the final installation screen is displayed to the user. This is ; the dialog that tells the user that they need to reboot the machine and asks if ; they want install to reboot the machine. If this parameter is set to "NO" then ; the final installation dialog is not displayed and the machine is automatically rebooted. !AskReboot = NO [NovellNetWareClientParameters] ; The [Novell NetWare Client Parameters] section contains answers to possible installation ; process questions. These parameters configure installation options and pre-configure ; answers to the dialogs that may pop up during the installation. These parameters silence ; the questions asked during both an NT Unattended and a Novell IntranetWare Client SETUPNW.EXE ; installation. Each section contains a TITLE, an EXPLANATION, and the correct syntax ; of the parameter. It is possible to edit the UNATTEND.TXT file and remove the explanatory ; sections, if you no longer need the reference. ; Warning: This is an NT .INF file and global INF variables are identified by the ! preceeding ; them. The ! must proceed a Global INF variable! ; Setting the Major and Minor Internal Versions ; The Major and Minor Internal Versions parameters are supplied as additional configuration ; parameters for use with /ACU. These values can be increased for each inclemental installation ; of the Client. For example if you received a few fixed or patched files for this Client and ; need to install them using SetupNW.exe /U /ACU, then increment one of the Internal version numbers. !MajorInternalVersion = 0 !MinorInternalVersion = 0 ; Accepting the License Agreement ; If you set AcceptLicenseAgreement to YES the "agree.txt" file, Novell's license acceptance ; language dialog will not pop up automatically for each end user. Therefore, you are ; accepting the license terms and conditions on behalf of your organization and are responsible ; for complicance with the license terms and conditions by end users. ; If the AcceptLicenseAgreement is set to "NO" all users will be prompted to accept the ; agreement individually when the Client is installed. !AcceptLicenseAgreement = NO ; Removing the MS NetWare Client ; Because the Novell Client is complete network client, it cannot be installed ; on a machine that has MS Client Services for NetWare loaded. The AskRemoveMSNetWareClient and the ; RemoveMSNetWareClient parameters allow for the removal of the MS Client Services for NetWare and ; then the installation of the Novell Client Services. ; It is important that these parameters are set correctly, because if the MS Client is ; installed and the RemoveMSNetWareClient is set to "NO" the installation will exit and ; report an installation error. ; The first parameter, AskRemoveMSNetWareClient is used for displaying a dialog to prompt ; the user for the removal of the MS Client. ; The second parameter is used to specify the default value on the dialog if it is ; displayed, or to specify the removal option when the RemoveMSNetWareClient Dialog is not ; displayed. !AskRemoveMSNetWareClient = NO !RemoveMSNetWareClient = YES ; The UseNetWareGINA parameter will install the Novell IntranetWare Client for ; for Windows NT GINA Authenticator when a third party GINA is detected. ; If UseNetWareGINA = YES then the third party GINA will be automatically ; removed and the Novell GINA will be installed. ; If UseNetWareGINA = NO and a third party GINA is detected the installation ; will pause and ask the user to remove the third party GINA or cancel the ; client installation. !UseNetWareGINA = YES ; Install Novell NetWareIP Services ; The AskNetWareIP and InstallNetWareIP are the parameters used to specify installation ; of the Novell NetWareIP services. The first parameter displays a dialog that asks the user if ; NetWareIP is to be installed. The second parameter specifies the default value on the dialog ; if it is displayed or specifies the installation option when the NetWareIP installation dialog ; is not displayed. !AskNetWareIP = NO !InstallNetWareIP = NO ; Novell Client Services Parameters Section ; The Novell Client Configurable Parameters Section contains all the Client parameters that ; can be preconfigured. The first parameter is the actual value of the data that is written ; to the registry and used by the Client. This data value can later be adjusted from the Windows ; NT Network control panel property pages for the Novell Client. The second parameter for each ; value is an Over Write Value. If this value is set to "YES," then the data will be written to ; the registry. If the value is set to "NO" then the data will only be written to the registry ; if the parameters value is blank. ; NOTE: ALL OF THESE PARAMETER VALUES ARE COMMENTED OUT. To set any of these Novell Client ; Configurable Parameters remove the ; at the beginning of each line. ; Novell IntranetWare Client Services Configuration Client Property Page Parameters ;!Preferred_Server = ; Property Page: Novell IntranetWare Client Services Configuration Client ; Parameter: Preferred Server ; Values: Any valid NetWare or IntranetWare server available to this Client. ; Default "Blank" ; Range/Valid: 47 Characters, no spaces ; Parameter Dependencies: None ; Conditions: Preferred_Tree, GetNearestServer ; Description: Specifies the preferred NetWare or IntranetWare server this client should attach to ; when attaching to NetWare 4.x or IntranetWare using NDS. If Preferred Tree is set, the client ; attempts to connect to any server in that tree. ;!Preferred_Server_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Preferred_Bindery_Server = ; Property Page: NWGina Login Utility (Initial IntranetWare Login screen) ; Parameter: Preferred Bindery Server ; Values: Any valid NetWare or IntranetWare server available to this Client. ; Default "Blank" ; Range/Valid: 47 Characters, no spaces ; Parameter Dependencies: None ; Conditions: ; Description: Specifies the preferred NetWare or IntranetWare server this client should ; attach to when connecting using the Bindery. ;!Preferred_Bindery_Server_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Preferred_Tree = ; Property Page: Novell IntranetWare Client Services Configuration Client ; Parameter: Preferred tree ; Values: Any valid NDS directory tree for NetWare 4.x or IntranetWare. ; Default: Blank ; Range/Valid: 42 Characters ; Parameter Dependencies: None ; ; Conditions: The Preferred_Tree value must be one of the trees set in the following ; Tree/Default Name Context Pairs. These are set using the Tree_List1 and Default_Context_List1 ; parameters. If the Preferred_Tree in not in the list of Tree/Default Name Context pairs then the ; Client will use the NDS tree root context when looking for users and will in most cases ; not find the users, which will cause login errors. ; ; Description: Specifies the preferred Novell NetWare Directory Services tree the ; client will attach to. If there is no server available in the preferred tree, the client ; will attempt to connect to the server designated in the Preferred_Server ; parameter. ;!Preferred_Tree_OverWriteValue = Yes ; Values: Yes or No ; Default: No ; Tree and Default Name Context pairs can be entered using the the following sets of variables. ; Enter multiple pairs by copying the three variables and increasing the integer number ; at the end of the variable name. ;!Tree_List1 = ;!Default_Context_List1 = ;!Tree_List_OverWriteValue1 = Yes ;!Tree_List2 = ;!Default_Context_List2 = ;!Tree_List_OverWriteValue2 = Yes ; .3.4.5.6....N ;!Tree_ListN = ;!Default_Context_ListN = ;!Tree_List_OverWriteValueN = Yes ; Property Page: Novell IntranetWare Client Services Configuration Client ; Parameter: Tree_List ; Values: Any valid directory tree for NetWare 4.x or IntranetWare. ; Default: Blank ; Range/Valid: 47 Characters for tree, 255 Characters for name context ; Parameter Dependencies: None ; Conditions: ; Description: Specifies Novell NetWare Directory Services trees and the default name context ; that a client will use when attaching to an NDS tree. ; !Tree_List_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!First_Network_Drive = F ; Property Page: Novell IntranetWare Client Services Configuration Client ; Parameter: First network drive ; Values: A-Z ; Default: F ; Range/Valid: A-Z ; Parameter Dependencies: None ; Conditions: First_NetWork_Drive_OverWriteValue ; Description: This parameter sets the first network drive to the drive letter specified. ; This parameter applies to any user logging into the network on this workstation. ;!First_Network_Drive_OverWriteValue = Yes ; Values: Yes or No ; Default: No ; Graphical Login Property Page Parameters ;!Display_Connection_Page = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Display connection page ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: Display_Connection_Page_OverWriteValue ; Description: This parameter allows access to the following parmeters: Login_to_Tree, ; Login_to_Server, Clear_Current_Connections, and Bindery_Connection. ;!Display_Connection_Page_OverWriteValue = Yes ; Values: On or Off ; Default: On ;!Login_To_Tree = Yes ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Log in to Tree ; Values: Yes or No ; Default: Yes ; Range/Valid: None ; Parameter Dependencies: Display_Connection_Page, Login_To_Tree, Login_To_Server ; Conditions: If Login_To_Server is selected, it is not possible to select this parameter. ; It is an either/or selection. ; Description: Allows user to login to an NDS tree. This options allows access to ; printers and other shared network services available on that tree. ;!Login_To_Tree_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Login_To_Server = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Log in to Server ; Values: Yes or No ; Default: No ; Range/Valid: NA ; Parameter Dependencies: Display_Connection_Page, Login_To_Tree ; Conditions: If Login_To_Tree is selected, it is not possible to select this parameter. ; It is an either/or selection. ; Description: Allows user to login to a specified server, if that server is not available, ; the server designated by the Preferred_Server parameter will be accessible, if that one ; is not available, then the GetNearestSever command will provide an available server for login. ;!Login_To_Server_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Bindery_Connections = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Bindery Connection ; Values: Yes or No ; Default: No ; Range/Valid: NA ; Parameter Dependencies: Display_Connection_Page, Login_To_Server. ; Conditions: If Login_To_Server set to "Yes," Bindery_Connections is available. ; Description: The parameter allow a NetWare Connection to be made using the Bindery. ;!Bindery_Connections_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Clear_Current_Connections = Yes ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Clear current Connections ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: Display_Connection_Page ; Conditions: None ; Description: This parameters clears all previous connections established by the IntranetWare ; services previous to this login. ;!Clear_Current_Connections_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Display_Script_Page = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Display script pages ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: This parameter allows the results of the login and profile scripts to display. ;!Display_Script_Page_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Login_Script = ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Login Script ; Values: Any valid script that conforms to established configuration requirements for ; Novell NetWare or IntranetWare. ; Default: Blank ; Range/Valid: NA ; Parameter Dependencies: Display_Script_Page ; Conditions: None ; Description: Login script is a file that provides specific information about a valid user object. ;!Login_Script_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Profile_Script = ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Profile Script ; Values: Any valid profile script that conforms to established configuration ; requirements for Novell Netware or IntranetWare. ; Default: Blank ; Range/Valid: NA ; Parameter Dependencies: Display_Script_Page ; Conditions: None ; Description: The parameter allows for an alternate NDS profile script for IntranetWare, ; instead of the system default's profile script. ;!Profile_Script_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Display_Results = Yes ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Display Script Results Window ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: Display_Script_Page ; Conditions: None ; Description: This parameter will display the login results and error messages in a Window. ;!Display_Results_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Close_Script_Results_Automatically = Yes ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Close script results automatically ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: Display_Script_Page, Display_Results ; Conditions: None ; Description: If the Display_Results_Windows parameter is set to "Yes," a Windows with the login ; results are displayed and the Close_Script_Results_Automatically closes the box, unless an ; error occured during login. ;!Close_Script_Results_Automatically_OverWriteValue = Yes ; Values: Yes or No ; Default: Yes ;!Run_Scripts = Yes ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Run scripts ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: Display_Script_Page ; Conditions: None ; Description: Run_Scripts allows the designated login and profile script to run. ;!Run_Scripts_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Display_Variables_Page = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Display variables page ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: This parameter allows the variables to be used by the login script. ;!Display_Variables_Page_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!%2 = ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: %2 ; Values: All valid characters that can be recognized by the login script. ; Default: Blank ; Range/Valid: 64 characters ; Parameter Dependencies: Display_Variable_Pages ; Conditions: None ; Description: This parameter provides additional information for the login script. ;!%2_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!%3 = ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: %3 ; Values: All valid characters that can be recognized by the login script. ; Default: Blank ; Range/Valid: 64 characters ; Parameter Dependencies: Display_Variables_Page ; Conditions: None ; Description: This parameter provides additional information for the login script. ;!%3_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!%4 = ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: %4 ; Values: All valid characters that can be recognized by the login script. ; Default: No ; Range/Valid: 64 characters ; Parameter Dependencies: Display_Variables_Page, %4 ; Conditions: None ; Description: This parameter provides additional information for the login script. ;!%4_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!%5 = ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: %5 ; Values: All valid characters that can be recognized by the login script. ; Default: No ; Range/Valid: 64 characters ; Parameter Dependencies: Display_Variable_Page, %5 ; Conditions: None ; Description: This parameter provides additional information for the login script. ;!%5_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Display_RAS_Page = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Display RAS page ; Values: Yes or No ; Default: Yes ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: This parameter allows the RAS (dial-up networking) page to show on login if RAS is installed ;!Display_RAS_Page_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Save_Settings_When_Exiting_Login = No ; Property Page: Novell IntranetWare Client Services Configuration Login ; Parameter: Save settings when exiting Login ; Values: Yes or No ; Default: No ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: This parameters allows any changes made on the Login screen to be saved upon exiting. ;!Save_Settings_When_Exiting_Login_OverWriteValue = Yes ; Values: Yes or No ; Default: No ; Advanced Login Property Page Parameters ;!Policy_Path = ; Property Page: Advanced Login ; Parameter: Parameter Groups: Policy Path and Filename ; Values: any valid path to a valid policy file ; Default: Blank ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: Sets path to user policy file ;!Policy_Path_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!NetWare_Storage_Of_Roaming_Profiles = No ; Property Page: Advanced Login ; Parameter: Parameter Groups: NetWare Storage of Roaming Profiles ; Values: Yes or No ; Default: No ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: Allows a roaming profile to be stored in an user home/mail directory or a specific file system path ; on the NetWare or IntranetWare Server. ;!NetWare_Storage_Of_Roaming_Profiles_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Storage_Type = "Home Directory" ; Property Page: Advanced Login ; Parameter: Parameter Groups: Store Profile in User Home/Mail Directory ; Store Profile in a NetWare File System Directory ; Values: "Home Directory" or "File System Pointer" ; Default: Store Profile in Home Directory ; Range/Valid: "Home Directory" or "File System Pointer" ; Parameter Dependencies: !NetWare_Storage_Of_Roaming_Profiles ; Conditions: None ; Description: Sets the storage type for a roaming profile. ;!Storage_Type_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!File_System_Pointer_Path = ; Property Page: Advanced Login ; Parameter: Parameter Groups: Path: ; Values: Any valid path to a NetWare File System Directory ; Default: Blank ; Range/Valid: NA ; Parameter Dependencies: !NetWare_Storage_Of_Roaming_Profiles, !Storage_Type ; Conditions: None ; Description: Path to a valid NetWare File System Directory for a user's roaming profile. ;!File_System_Pointer_Path_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Bitmap_Filename = ; Property Page: Advanced Login ; Parameter: Parameter Groups: Bitmap Filename ; Values: Any valid graphics file with a *.BMP format. ; Default: NWELCOME.BMP ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: File must be located in the Win NT directory. ; Description: Specifies .BMP seen on "Welcome" Screen, file must be in Win NT directory. ;!Bitmap_Filename_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Welcome_Screen_Caption = ; Property Page: Advanced Login ; Parameter: Parameter Groups: Caption ; Values: alphanumeric, non-reserved word ; Default: Begin Login ; Range/Valid: 64 characters ; Parameter Dependencies: None ; Conditions: None ; Description: Caption of the Novell IntranetWare Login popup box. ;!Welcome_Screen_Caption_OverWriteValue = yes ; Values: Yes or No ; Default: No ; Advanced Settings Property Page Parameters ;!Receive_Broadcast_Messages = All ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Receive Broadcast Messages ; Values: "All", "Server Only" or "None" ; Default: All ; Range/Valid: "All", "Server Only" or "None" ; Parameter Dependencies: None ; Conditions: None ; Description: Sets incoming messages a workstation can receive. ;!Receive_Broadcast_Messages_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!DOS_Name = WINNT ; Property Page: Advanced Settings ; Parameter: Parameter Groups: DOS Name ; Values: WINNT, DRDOS, IBMDOS, MSDOS ; Default: as designated by %OS ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: DOS Name is the operating system name used by the %OS parameter. ;!DOS_Name_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Large_Internet_Packets = On ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Large Internet Packets ; Values: On or Off ; Default: On ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: When Large Internet Packets is 'on,' it uses the maximum packet size negotiated ; between the IntranetWare server and the workstation, even across routers and bridges. ;!Large_Internet_Packets_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!LIP_Start_Size = 65535 ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Large Internet Packet Start Size ; Values: bytes ; Default: 65535 ; Range/Valid: 1-65535 bytes ; Parameter Dependencies: None ; Conditions: None ; Description: This determines the starting value for negotiating the Large Internet Packet size. ; Setting this value can shorten the initial negotiation time for packet size over slow links. ;!LIP_Start_Size_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Long_Machine_Type = IBM_PC ; Property Page: Advanced Settings ; Parameter: Parameter Groups:Long Machine Type ; Values: any valid machine type that the %MACHINE can recognize ; Default: IBM_PC ; Range/Valid: any valid machine type that the %MACHINE can recognize ; Parameter Dependencies: None ; Conditions: None ;!Long_Machine_Type_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!LSL_Max_Buffer_Size = 4736 ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Link Support Layer Max Buffer Size ; Values: bytes ; Default: 4736 ; Range/Valid: 100-24682 bytes ; Parameter Dependencies: None ; Conditions: None ; Description: This specifies the maximum supported packet size. Use this parameter to optimize ; performance for media [primarily token ring] that can use packets that are larger than the ; default size. ;!LSL_MAX_Buffer_Size_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Minimum_Time_To_Net = 0 ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Minmum Time to Net ; Values: milliseconds ; Default: 0 ; Range/Valid: 0-65535 ; Parameter Dependencies: None ; Conditions: None ; Description: Use to bridge WAN/Satellite links with time-to-net values ; set too low for the workstations to make a connection under the following ; conditions: Server is not running Packet; Burst or Transfer rate is 2400 BAUD. ; Use 10000 or 2400 BAUD lines. ;!Minimum_Time_To_Net_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Opportunistic_Locking = Off ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Opportunistic Locking ; Values: On or Off ; Default: Off ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: This auto-detects opportunities to exclusively cache files. 'On' improves ; performance. ;!Opportunistic_Locking_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Burst_Mode = On ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Burst Mode ; Values: On or Off ; Default: On ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: None ; Description: Burst Mode specifies whether Packet Burst is used. 'Off' disables Packet Burst. ;!Burst_Mode_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Pburst_Read_Window_Size = 36000 ; Property Page: Advanced Settings ; Parameter: Parameters Group: Max Read Burst Size ; Values: bytes ; Default: 36000 ; Range/Valid: 1-65536 ; Parameter Dependencies: None ; Conditions: None ; Description: This sets the maximum number of bytes per Read burst. ; The read window changes dynamically depending on network conditions. ;!Pburst_Read_Window_Size_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Pburst_Write_Window_Size = 15000 ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Max Write Burst Size ; Values: bytes ; Default: 15000 ; Range/Valid: 1-65536 ; Parameter Dependencies: None ; Conditions: None ; Description: This sets the maximum number of bytes per Write burst. ; The write window size changes dynamically depending on network conditions. ;!Pburst_Write_Window_Size_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Signature_Level = 1 ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Signature Level ; Values: numeric ; Default: 1 ; Range/Valid: 0-3 ; Parameter Dependencies: None ; Conditions: None ; Description: This determines the level of enhanced security support. Increasing the value ; increases security, but decreases performance. ;!Signature_Level_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Short_Machine_Type = IBM ; Property Page: Advanced Settings ; Parameter: Parameter Groups: Short Machine Type ; Values: 4 chars ; Default: IBM ; Range/Valid: 4 chars recognized by the %SMACHINE variable. ; Parameter Dependencies: None ; Conditions: None ; Description: This determines what overlay file is used when accessing older NetWare utilities. ;!Short_Machine_Type_OverWriteValue = Yes ; Values: Yes or No ; Default: No ; Novell NetWareIP Property Page Parameters ;!Remote_Config = Off ; Property Page: NetWare/IP Configuration Parameters ; Parameter: Auto detect configuration (Requires DHCP) ; Values: On or Off ; Default: Off ; Range/Valid: NA ; Parameter Dependencies: None ; Conditions: Requires DHCP ; Description: Allows DHCP preexisting parameters to configure the workstation or server network ; parameters. ;!Remote_Config_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!NWIP_Domain_Name = ; Property Page: NetWare/IP Configuration Parameters ; Parameter: NetWare/IP Domain name: ; Values: NA ; Default: Blank ; Range/Valid: all numbers and characters valid for a domain name. ; Parameter Dependencies: Remote_Config ; Conditions: A valid NWIP Server must exist. ; Description: The parameter specifies a NetWare/IP Domain. ;!NWIP_Domain_Name_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!AutoRetries = 1 ; Property Page: NetWare/IP Configuration Parameters ; Parameter: Retries to DSS during startup ; Values: numeric ; Default: 1 ; Range/Valid: 1-10 ; Parameter Dependencies: None ; Conditions: A DSS service must be available. ; Description: The number of times during startup to retry an unanswered DSS request. ;!AutoRetries_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!AutoRetry_Secs = 10 ; Property Page: NetWare/IP Configuration Parameters ; Parameter: Number of seconds between retries ; Values: numeric ; Default: 10 ; Range/Valid: 5-99 ; Parameter Dependencies: Remote_Config, AutoRetries, AutoRetries_OverWriteValue ; Conditions: A DSS service must be available. ; Description: This parameter specifies the number of seconds to wait between retires of an ; unanswered DSS request. ;!AutoRetry_Secs_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!NSQ_Broadcast = Off ; Property Page: NetWare/IP Configuration Parameters ; Parameter: Broadcast SAP nearest server queries to network ; Values: On or Off ; Default: Off ; Range/Valid: NA ; Parameter Dependencies: Remote_Config ; Conditions: A NDS NetWare or IntranetWare server must exist. ; Description: This parameter locates a NetWare or IntranetWare server by broadcasting the request to the local ; network. ;!NSQ_Broadcast_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!NWIP1_1_Compatibility = Off ; Property Page: NetWare/IP Configuration Parameters ; Parameter: NetWare/IP 1.1 compatibility ; Values: On or Off ; Default: Off ; Range/Valid: NA ; Parameter Dependencies: Custom Configuration ; Conditions: A DNS NetWare or IntranetWare server must exist. ; Description: If the NetWare or IntranetWare server is running NetWare/IP 1.1 pre-patch, this parameter must be ; set to 'on.' ;!NWIP1_1_Compatibility_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Use_Custom_Port = Off ; Property Page: NetWare/IP Configuration ; Parameter: Use NWIP Custom Port ; Values: On or Off ; Default: Off ; Range/Valid: NA ; Parameter Dependencies: Custom Configuration ; Conditions: A DNS NetWare or IntranetWare server must exist. ; Description: This parameter allows you to designate a custom port. ;!Use_Custom_Port_OverWriteValue = Yes ; Values: Yes or No ; Default: No ;!Port_Number = ABCD ; Property Page: NetWare/IP Configuration ; Parameter: Port Number ; Values: Hexadecimal ; Default: ABCD ; Range/Valid: 0 - FFFF ; Parameter Dependencies: Remote_Config ; Conditions: A DNS NetWare or IntranetWare server must exist. ; Description: This parameter designates the hex port number for the NetWareIP custom port. ;!Port_Number_OverWriteValue = Yes ; Values: Yes or No ; Default: No ; Novell NWIP Servers Page Parameters ;!Nearest_NWIP_Server1 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Nearest NetWare/IP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid NetWare/IP Server must exist, be designated correctly and be accessible ; to the workstation. ; Description: Designates the first entry in the nearest NetWare/IP Server list. ;!Nearest_NWIP_Server1_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Nearest_NWIP_Server2 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Nearest NetWare/IP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid NetWare/IP Server must exist, be designated correctly and be accessible ; to the workstation. ; Description: Designates the second entry in the nearest NetWare/IP Server list. ;!Nearest_NWIP_Server2_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Nearest_NWIP_Server3 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Nearest NetWare/IP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid NetWare/IP Server must exist, be designated correctly and be accessible ; to the workstation. ; Description: Designates the third entry in the nearest NetWare/IP Server list. ;!Nearest_NWIP_Server3_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Nearest_NWIP_Server4 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Nearest NetWare/IP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid NetWare/IP Server must exist, be designated correctly and be accessible ; to the workstation. ; Description: Designates the fourth entry in the nearest NetWare/IP Server list. ;!Nearest_NWIP_Server4_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Nearest_NWIP_Server5 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Nearest NetWare/IP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid NetWare/IP Server must exist, be designated correctly and be accessible ; to the workstation. ; Description: Designates the fifth entry in the nearest NetWare/IP Server list. ;!Nearest_NWIP_Server5_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Preferred_DSS1 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Preferred Domain SAP/RIP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid Domain SAP/RIP server must exist and be accessible to the workstation. ; Description: Designates the first entry in the list of Domain SAP/RIP Servers which are allowed ; to function in an NDS environment. ;!Preferred_DSS1_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Preferred_DSS2 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Preferred Domain SAP/RIP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid Domain SAP/RIP server must exist and be accessible to the workstation. ; Description: Designates the second entry in the list of Domain SAP/RIP Servers which are allowed ; to function in an NDS environment. ;!Preferred_DSS2_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Preferred_DSS3 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Preferred Domain SAP/RIP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid Domain SAP/RIP server must exist and be accessible to the workstation. ; Description: Designates the third entry in the list of Domain SAP/RIP Servers which are allowed ; to function in an NDS environment. ;!Preferred_DSS3_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Preferred_DSS4 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Preferred Domain SAP/RIP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid Domain SAP/RIP server must exist and be accessible to the workstation. ; Description: Designates the fourth entry in the list of Domain SAP/RIP Servers which are allowed ; to function in an NDS environment. ;!Preferred_DSS4_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Preferred_DSS5 = ; Property Page: NetWare/IP Configuration Servers ; Parameter: Parameter Groups: Preferred Domain SAP/RIP Servers ; Values: hostnames, fully-qualified hostnames, IP Addresses or IP Address Masks ; Default: Blank ; Range/Valid: alphanumeric ; Parameter Dependencies: None ; Conditions: A valid Domain SAP/RIP server must exist and be accessible to the workstation. ; Description: Designates the fifth entry in the list of Domain SAP/RIP Servers which are allowed ; to function in an NDS environment. ;!Preferred_DSS5_OverWriteValue = yes ; Values: Yes or No ; Default: No ; Workstation Manager Property Page Parameters. ;!Enable_Workstation_Manager = Off ; Property Page: Novell IntranetWare Client Services Workstation Manager ; Parameter: Parameter Groups: ; Values: On or Off ; Default: Off ; Range/Valid: On or Off ; Parameter Dependencies: ; ; Conditions: ; Description: This parameter enables the Workstation Manager functionality. ;!Enable_Workstation_Manager_OverWriteValue = yes ; Values: Yes or No ; Default: No ;!Workstation_Manager_Trusted_Trees = ; Property Page: Novell IntranetWare Client Services Workstation Manager ; Parameter: Parameter Groups: ; Values: List of Novell NDS Tree names. ; Default: Blank ; Range/Valid: Comma deliminated list of valid Novell NDS Trees surrounded by double quotes. ; For Example "tree1,tree2,tree3" ; Parameter Dependencies: This List of trees will have no effect unless the Enable Workstation ; Manager parameter is enabled. ; Conditions: ; ; Description: This parameter specifies the list of Novell NDS trees that the Workstation Manager ; will work with. ;!Workstation_Manager_Trusted_Trees_OverWriteValue = yes ; Values: Yes or No ; Default: No