1100 IntranetWare Client Services Configuration 1101 It is recommended that machines running the IntranetWare Client have at least 6 megabytes of memory.\n\nThis machine has only %d megabytes. Do you still want to install the IntranetWare Client? 1102 NWSETUP.INI 1110 Low Memory Warning 1120 The IntranetWare Client Installation encountered an error when checking your memory.\nIf you do not have at least 6 Megabytes of memory installed on your machine, we suggest that you increase the memory then install IntranetWare Client. 1130 Error setting memory flag in registry, you will receive this low memory warning again. 1140 Error removing registry setting for low memory installations. If you re-install the Novell Client, you may not be warned about having too little installed XMS memory. 1150 Data entered is invalid! 1160 Data entered is out of range! 1170 Required field has no entry! 1171 Required field 'NetWare/IP Domain name' must be entered! 1180 NetWare/IP Parameter Error 1185 TSA Parameter Error 1200 NetWare/IP Configuration 1201 Novell IntranetWare Client can not be installed together with Client for NetWare Networks 1202 Novell SNMP Agent can not be installed together with Microsoft SNMP agent 1203 Network 1205 IPX Parameter Error 1210 IPX Advanced Parameter Error 1211 The Bindings list must be empty before switching to Auto Bind. Do you want to clear the list and continue? 1220 SPX Parameter Error 1230 NetBIOS Paramter Error 1231 Named Pipes Parameter Error 1250 Capture Parameter Error 1260 Advanced Settings Parameter Error 1270 NetWare/IP Address Parameter Error 1280 Error removing registry setting for low disk space installations. If you re-install the Novell Client, you may not be warned about having insufficient disk spaces. 1290 Low Disk Space Warning 1292 Error setting low disk space flag in Registry, you will receive this low disk space warning again. 1294 The IntranetWare Client Installation encountered an error when checking your disk space.\n\nYou should have at least 10 megabytes of free disk space on your machine before installing IntranetWare Client. 1296 Your computer is low on disk space. In order to install IntranetWare Client you should have at least %ld bytes of free disk space.\n\nDo you still want to install the IntranetWare Client? 1306 Alert Beep specifies whether an audible beep should be sounded when a pop-up message is displayed. 1307 Auto Reconnect Level determines what is restored after a network critical error. 1308 Caching file writes improves performance by saving files to workstation memory, before saving them to the network. 1309 Checksum provides a higher level of data integrity by validating NCP packets. 1310 Close Behind Ticks is the time in ticks the client waits after a file is closed before flushing the file from cache and writing it to disk. Increasing this value improves performance. There are about 18 ticks per second. 1311 Delay Writes keeps the file in cache for the amount of time specified by Close Behind Ticks after the application closes the file. This is used for applications that repeatedly close, and reopen files, such as overlay files. 1312 DOS Name is the operating system name used by the %OS parameter. 1313 Environment Pad specifies the number of bytes to add to the DOS environment for DOS applications. 1314 File Cache Level specifies the type of caching used at the client. The larger the value, the better the performance. 1315 Force First Network Drive specifies the network drive letter the SYS:LOGIN directory is mapped to after logging out. 'On' returns you to the 'First Network Drive.' 'Off' leaves you at the current drive. 1316 Handle Net Errors, when set to 'on', means the client handles network critical errors. 'Off' means the client generates an INT 24 allowing applications to handle network critical errors. 1317 When Large Internet Packets is 'on', it uses the maximum packet size negotiated between the IntranetWare server and the workstation, even across routers and bridges. 1318 Large Internet Packet Start Size determines the starting value for negotiating the Large Internet Packet size. Setting this value can shorten the initial negotiation time for packet size over slow links. 1319 Lock Delay determines the delay after a SHARE failure, prior to retrying the open or lock of a file. Increase this value if you receive SHARE errors. There are approximately 18 ticks per second. 1320 Lock Retries determines the number of retries to open or lock a file, after receiving a SHARE failure. Increase this value if you receive SHARE errors. 1321 Log File specifies the location of the LOG file used for client diagnostics (for example, C:\Novell\Client\Log.txt). 1322 Log File Size determines the maximum size of the LOG file used for client diagnostics. 1323 Long Machine Type is the workstation type used by the %MACHINE parameter. 1324 Max Cache Size determines the largest size of the IntranetWare cache. Larger values improve network file access performance, but decrease the memory available for running applications or caching local drives. 1325 Max Current Directory Length sets the length of the DOS prompt. Some applications do not function correctly if this value is set greater than 64. 1326 Message Timeout defines the time in ticks before broadcast messages are cleared from the screen without user intervention. There are approximately 18 ticks per second. 1327 On bridged WAN/Satellite links with low time-to-net values, workstations may fail to make a connection under the following conditions: Server is not running Packet Burst or Transfer rate is 2400 baud. Use 10000 on 2400 baud lines. 1328 Name Service Enum Order sets the order in which names are resolved to addresses during operations such as MAP. Time to access network resources can be decreased by ordering the name services by frequency of use. 1329 NCP Max Timeout is the amount of time allowed to retry a network connection before an error message is displayed. 1330 Net Status Timeout specifies the number of seconds to wait for a response from the network to an application's request before the client displays an error message. 1331 IntranetWare Protocol allows you to list the order that the IntranetWare Name Services are accessed during authentication to the network. 1332 Network Printers sets the number of logical LPT ports the IntranetWare DOS Requester can capture. This parameter allows you to capture and redirect LPT1 through LPT9. 1333 Opportunistic Locking auto-detects opportunities to exclusively cache files. 'On' improves performance. 1334 Burst Mode specifies whether Packet Burst is used. 'Off' disables Packet Burst. 'On' enables Packet Burst, which reduces overall network traffic and improves performance. 1335 Max Read Burst Size sets the maximum number of bytes per Read burst. The read window size changes dynamically depending on network conditions. 1336 Max Write Burst Size sets the maximum number of bytes per Write burst. The write window size changes dynamically depending on network conditions. 1337 Print Header sets the size of the buffer (in bytes) that holds the information used to initialize the printer for each print job. Increase this value if you are using a complex print job, or printing to a PostScript printer. 1338 Print Tail sets the size of the buffer (in bytes) that holds the information used to reset the printer after a print job. 1339 Read Only Compatibility determines whether a file marked Read Only can be opened with a Read/Write access call. Some applications require this parameter to be 'on'. 1340 If Search Directories First is set to 'off', a DIR listing will display files first, then directories. If set to 'on', a DIR listing will display directories first, then files. 1341 Search Mode alters the method for finding a file if it is not in the current directory or path. 1342 If Set Station Time is set to 'on', the workstation's time and date are synchronized with the IntranetWare server that the workstation attaches to initially. 1343 Short Machine Type determines what overlay file is used when accessing older NetWare utilities. 1344 The IntranetWare server doesn't have directory entries for '.' and '..' as DOS does. To see '.' and '..' in directory listings, turn Show Dots to 'on'. 1345 Signature Level determines the level of enhanced security support. Increasing this value increases security, but decreases performance. 1346 Set True Commit to 'on' when processing critical data to guarantee data integrity. 'Off' opts for performance over data integrity. 'On' opts for data integrity over performance. 1347 Use Video BIOS specifies whether the client uses BIOS or Direct Video Memory calls when a pop-up message is displayed. The BIOS method is slower than Direct Video Memory calls. 1348 Hold Files specifies whether files opened by a program using FCB_IO are held open until the program exits. 'On' means they are. 'Off' means they can be closed by the program before it exits. 1349 Link Support Layer Buffer Size specifies the maximum supported packet size. Use this parameter to optimize performance for media (primarily token ring) that can use packets that are larger than the default size. 1350 Net Status Busy Timeout specifies the number of seconds to wait for a nonbusy response from a server before the client displays an error message. 1352 Cache IntranetWare Password specifies whether the IntranetWare password from the first login is stored in memory and used to authenticate to additional IntranetWare resources. 1353 Receive Broadcast Message parameter sets the incoming messages a workstation can receive. If set to 'All' the station will receive all messages, 'Server Only' accepts server messages, and 'None' restricts all incoming messages. 1401 Auto Reconnect Level 1402 Cache Writes 1403 Checksum 1404 Close Behind Ticks 1405 Delay Writes 1406 DOS Name 1407 Environment Pad 1409 File Cache Level 1410 Force First Network Drive 1411 Handle Net Errors 1412 Large Internet Packet Start Size 1413 Large Internet Packets 1414 Lock Delay 1415 Lock Retries 1416 Long Machine Type 1417 Link Support Layer Max Buffer Size 1418 Max Cache Size 1419 Max Cur Dir Length 1420 Message Timeout 1421 Minimum Time To Net 1422 Name Service Enum Order 1423 NCP Max Timeout 1424 IntranetWare Protocol 1425 Net Status Timeout 1426 Net Status Busy Timeout 1427 Network Printers 1428 Opportunistic Locking 1429 Burst Mode 1430 Max Write Burst Size 1431 Max Read Burst Size 1432 Print Header 1433 Print Tail 1434 Read Only Compatibility 1435 Search Dirs First 1436 Search Mode 1437 Set Station Time 1438 Short Machine Type 1439 Show Dots 1440 Signature Level 1441 True Commit 1442 Alert Beep 1443 Use Video BIOS 1444 Log File 1445 Log File Size 1446 NDS BIND 1447 BIND NDS 1448 NDS 1449 BIND 1450 Hold Files 1452 Cache IntranetWare Password 1453 Receive Broadcast Messages 1454 All 1455 Server Only 1456 None 1500 Valid range 1501 : \n 1502 - 1503 (ticks) 1504 (bytes) 1505 (kbytes) 1506 (characters) 1507 (milliseconds) 1508 (seconds) 1509 (retries) 1510 Error! Value out of range 1511 Parameter: '%s' must be number in the range %s to %s %s. 1512 on 1513 off 1514 Retries to DSS during startup 1515 Number of seconds between retries 1516 NetWare/IP Domain name 1517 NetWare 1.1 Compatability 1518 Broadcast SAP nearest server queries to network 1519 Preferred server 1520 Preferred tree 1521 Name context 1522 Additional login parameters 1523 First network drive 1524 1525 A 1526 B 1527 C 1528 D 1529 E 1530 F 1531 G 1532 H 1533 I 1534 J 1535 K 1536 L 1537 M 1538 N 1539 O 1540 P 1541 Q 1542 R 1543 S 1544 T 1545 U 1546 V 1547 W 1548 X 1549 Y 1550 Z 1551 1552 1553 1554 IPX Retry Count 1555 Allow IPX access through interupt 7AH 1556 Allow IPX access through interupt 64H 1557 IPX diagnostics enabled 1558 Pre-Allocate VGNMA memory 1559 Source Routing 1560 SPX Connections 1561 SPX Verify Timeout 1562 SPX Listen Timeout 1563 SPX Abort Timeout 1564 Allow Connection Watchdogs 1565 Enable Monitor Community 1566 Monitor Community 1567 Enable Control Community 1568 Control Community 1569 System Name 1570 System Location 1571 System contact 1572 Enable Authentication Traps 1573 specified 1574 off 1575 any 1576 Bindery Connection 1577 Clear Current Connections 1578 Display results window 1579 Close script results automatically 1581 Profile Script 1582 Login Script 1583 Script Variable %2 1584 Script Variable %3 1585 Script Variable %4 1586 Script Variable %5 1587 Save Settings when exiting Login 1588 Disply Connection page 1589 Display Script page 1590 Display Variables page 1591 Login Parameter Error 1592 Only A-Z, 0-9, and _ characters are allowed in the '%s' parameter. 1593 NT Client Parameter Error 1594 Only A-Z, 0-9, -, and _ characters are allowed in server names. 1595 Error! Value is not a valid level 1596 Parameter: '%s' is not a valid level. Resetting this parameter to the default value. 1597 Tree Context Pair Error 1598 Tree and Context pairs must be added to the list, Please enter the additional data. 1599 Dynamic Parameter 1600 All 1601 Packet Management 1602 Connection 1603 Environment, NETX Compatibility 1604 File System 1605 Performance, Cache 1606 Printing 1607 TroubleShooting 1608 WAN 1609 Valid range: %s - %s %s 1650 Workstation name 1651 User name 1652 Password 1653 Server name 1654 Auto register 1655 Resources available to TSA 1700 Entry limit exceeded: limit is 5 entries. 1701 Advanced IPX Parameter Error 1702 The space character is not allowed in Frame Type names. Use an '_' as a valid character to represent a space. 1703 Display RAS page 1721 Auto Detect/Custom Configuration 1722 Log in to Tree/Server 1723 Duplicate Trees are not allowed in this list. Each tree can have only one default context. 1724 Entry limit exceeded: 1750 Policy Path and Filename 1751 IntranetWare Storage of Roaming Profile 1752 Storage Type 1753 File System Pointer Path 1756 Bitmap Filename 1757 Caption 1800 Workstation Wizard Parameter Error 1801 Enable Workstation Wizard on these Trusted Trees 1820 Host MIB Parameter Error 2110 Error removing existing Primary Provider 'Needs Primary Set' flag from registry. 2112 Set Primary Provider Error 3104 Couldn't RegisterClass() 3105 Couldn't CreateWindow 3106 GlobalAlloc() failed 3107 You must reboot before trying to reload the Novell IntranetWare Client Services 3108 Reminder 3109 LocalAlloc() failed 3110 You must pass in- Arg[0]:the fullpath of autoexec.nt Arg[1]: the file string to add to the end 3111 The fopen() call to open autoexec.nt failed. 3112 CopyFile() failed 3113 Autoexec.nt not found 3118 The value entered is too small. It has been reset to the smallest allowable value. 3119 The value entered is too large. It has been reset to the largest allowable value. 3120 Parameter Error 3121 A value is required for this parameter. It has been reset to the default value. 3122 The file had a bad file size. 3123 ReadFile failed. 3124 DeleteFile failed. 3125 WriteFile failed. 3126 SetFilePointer failed. 3127 GetTempPath failed. 3128 GetTempFileName failed. 3129 <<&Basic 3130 &Advanced>> 3131 &OK 3132 &Cancel 3133 &Help 3134 RenameFile failed. 3200 NetWare Support for IP Configuration 3201 NetWare/IP Domain 3202 Advanced Settings 3203 Preferred DSS 3204 Nearest NetWare/IP Server 3205 Enable NSQ Broadcasts 3206 AutoRetries 3207 AutoRetryTime 3210 Minimum value allowed for the retry count exceeded. Value reset to minimum allowed. 3211 Maximum value allowed for the retry count exceeded. Value reset to maximum allowed. 3212 Invalid entry for First Network Drive. Value reset to default. 3213 Parameter Error 3300 Guests 3301 Users 3302 Replicator 3303 Backup Operators 3304 Power Users 3305 Administrators 3306 System