DRIVER INFORMATION
 Driver Name:  Tseng Labs Windows NT 4.0 Display Driver
 Driver Zipfile: NT40TLI.ZIP
 Driver Date: 8/97
 Driver Version: 4.03
 Operating System:  Windows NT 4.0
 Tseng Graphics chip support:
	 ET6100
         ET6000
         ET4000/w32p
         ET4000/w32i
         ET4000/w32
         ET4000
 Driver  File List:
         DISK1
         ET4000.SYS
         VERSION
         ET6W32.INF
         W32.DLL
         README.TXT

DRIVER INSTALLATION
 1. Doubleclick on 'My Computer'.
 2. Doubleclick on 'Control Panel'.
 3. Double click on 'Display'.
 4. Click on 'Settings' tab.
 5. Click on 'Display Type'.
 6. Click on 'Change'.
 7. Click on 'Have Disk'.
 8. Enter the path for driver files and click on 'OK'.
 9. If 'Tseng Labs Inc. Compatable Graphics Adapter' is displayed,
    click OK.
 10. Read Third-party Drivers warning and click 'Yes' to install.

 NOTE: The new driver is not loaded until the computer is restarted.
       After system restart, use the Display Properties/Settings to 
       select desired mode.

DRIVER CHANGES from version 4.02
 
 1.  The following modes were added to support the Tseng Labs ET6100 chip only:
	1600x1200x8bpp @ 65hz

	1024x768x24bpp @75hz
	1024x768x24bpp @85hz

	1152x864x24bpp @60hz
	1152x864x24bpp @70hz

	1280x1024x16bpp @70hz
	1280x1024x16bpp @75hz
	1280x1024x24bpp @43hz interlaced

	1600x1200x16bpp @47hz interlaced

 2.  Miscellaneous bugs fixed

NOTES/LIMITATIONS
 1. 16 color support is only available if there is not sufficient video
     memory to support 256 colors in high resolution modes.
     16 color modes will not be available except for boards with
     limited memory.
 2. 16 million color modes are only available if memory is configured
    in linear mode. The ET6000 family are the only chips that this 
    NT 4.0 driver configures in linear mode and are therefore the 
    only chips that will have 16 million color modes available. 
    The ET4000, ET4000w32, ET4000w32i, ET4000w32p do not have 16 million 
    color modes available.

UNINSTALL INSTRUCTIONS
 1. Doubleclick on 'My Computer'.
 2. Doubleclick on 'Control Panel'.
 3. Double click on 'Display'.
 4. Click on 'Settings' tab.
 5. Click on 'Display Type'.
 6. Click on 'Change'.
 7. Scroll down the Manufacturers window and click on Tseng Labs.
 8. Highlight your chip type.
 9. Click  OK.
 10. Insert the Windows NT 4.0 CD and the original Microsoft drivers will 
     install.

  NOTE: The new driver is not loaded until the computer is restarted.
       After system restart, use the Display Properties/Settings to 
       select desired mode.