[DCAReaderControlsHelp]
L1=\n
L2=\tMaintain Text\tCheck this box to enable text positioned by Backspace and
L3=\tPosition\t\t\tZICR codes to convert as correctly positioned text.  
L4=\n  
L5=\t\t\t\t\t\tUncheck this box to strip Backspace and ZICR codes.
L6=\n 
L7=\n
L8=\tMaintain\t\t\tCheck this box to convert formatted text as Body Text.
L9=\tFormatted\t\tDocuments must be paginated with generated text resolved
L10=\tText\t\t\t\tinto the document. The controls that generate formatted text   
L11=\t\t\t\t\t\twill be stripped. If documents are paginated, and text is not
L12=\t\t\t\t\t\tresolved into the document, then the control and the text will
L13=\t\t\t\t\t\tbe stripped.
L14=\t\t\t\t\t\tUncheck this box to convert these controls correctly.
L15=\n
L16=\n
L17=\tLine Draw\t\tDisplaywrite Line-draw characters can be converted as:
L18=\n
L19=\t\t\t\t\t\t- spaces.
L20=\t\t\t\t\t\t- vertical lines and underscores (ANSI character set).
L21=\t\t\t\t\t\t- line-draw characters in a prefered font.
L22=\n
L23=\n
L24=\tSub/Superscript\tChoose either a base-line change or a font change.
L25=\thandling\t\t\t\tThis option will not be selectable if your wordprocessor
L26=\t\t\t\t\t\t\tdoes not support baseline changes.
L27=\n
L28=\n

[CURReaderControlsHelp]
L1=\tIf your documents do not contain initial font, font size, paper 
L2=\tsize and print margins definitions, these values should be setup for 
L3=\tDocument Conversion Manager.
L4=\n
L5=\tInstallation defaults are :
L6=\t\t\t\t\t\tFont = #d01-Courier   Size = 12pt     Paper = 8.26x11.69
L7=\n
L8=\n
L9=\tLine Draw\t\tLine-draw characters can be converted as:
L10=\n
L11=\t\t\t\t\t\t- spaces.
L12=\t\t\t\t\t\t- vertical lines and underscores (ANSI character set).
L13=\t\t\t\t\t\t- line-draw characters in a prefered font.
L14=\n
L15=\n
L16=\tSub/Superscript\tChoose either a base-line change or a font change.
L17=\thandling\t\t\t\tThis option will not be selectable if your wordprocessor
L18=\t\t\t\t\t\t\tdoes not support baseline changes.
L19=\n
L20=\n

[UPXReaderControlsHelp]
L1=\tIf your Uniplex documents do not contain initial font, font size, paper 
L2=\tsize and print margins definitions, these values should be setup for 
L3=\tDocument Conversion Manager.
L4=\n
L5=\tInstallation defaults are :
L6=\t\t\t\t\t\tFont = FX-Normal   Size = 10pt     Paper = 8.26x11.69
L7=\n
L8=\n
L9=\tLine Draw\t\tUniplex Line-draw characters can be converted as:
L10=\n
L11=\t\t\t\t\t\t- spaces.
L12=\t\t\t\t\t\t- vertical lines and underscores (ANSI character set).
L13=\t\t\t\t\t\t- line-draw characters in a prefered font.
L14=\n
L15=\n
L16=\tSub/Superscript\tChoose either a base-line change or a font change.
L17=\thandling\t\t\t\tThis option will not be selectable if your wordprocessor
L18=\t\t\t\t\t\t\tdoes not support baseline changes.
L19=\n
L20=\n

[AMPWriterControlsHelp]
L1=\tSelect printer\t\tChoose a Windows printer driver for your documents.
L2=\n
L3=\n
L4=\tChange paper\t\tDefault is "No change". READER input page sizes will be
L5=\tsize\t\t\t\t\tconverted exactly into Ami Pro, even if the input form size
L6=\t\t\t\t\t\t\tis not available on the currently selected printer.
L7=\t\t\t\t\t\t\tSelecting a paper size will force all READER input pages
L8=\t\t\t\t\t\t\tto convert to that paper size.
L9=\t\t\t\t\t\t\tPaper orientation will not be affected.
L10=\n
L11=\tHorizontal scale\tSelect this option if text infringes the right-most print
L12=\t\t\t\t\t\t\tposition, and you want to maintain the horizontal layout of
L13=\t\t\t\t\t\t\tyour document. Text will be auto-scaled in percentage
L14=\t\t\t\t\t\t\tincrements until it will fit on the paper.
L15=\n
L16=\tScale to paper\t\tSelect this option to auto-scale documents in both axes
L17=\t\t\t\t\t\t\tto maintain text on the selected paper size.
L18=\n
L19=\tMinimum margins\tEdit these values to re-define the minimum margins,
L20=\t\t\t\t\t\t\t(crop areas), available on the currently selected printer.
L21=\t\t\t\t\t\t\tIf text infringes these areas, text will be re-positioned
L22=\t\t\t\t\t\t\tto conform to these values.
L23=\n
L24=\tSet margins\t\t\tCheck this box to re-define your document margins as the
L25=\t\t\t\t\t\t\tminimum values. Text will re-format accordingly.
L26=\t\t\t\t\t\t\tScaling is not available if this box is checked.
L27=\n

[WFWWriterControlsHelp]
L1=\n
L2=\tWord\t\t\t\t\tChoose the version of Word for Windows that you are using.
L3=\tVersion\t\t\t\tChoose to create style or ruler based documents
L4=\n
L5=\tSelect printer\t\tChoose a Windows printer driver for your Word documents.
L6=\n
L7=\tChange paper\t\tDefault is "No change". READER input page sizes will be
L8=\tsize\t\t\t\t\tconverted exactly into Word, even if the input form size
L9=\t\t\t\t\t\t\tis not available on the currently selected printer.
L10=\t\t\t\t\t\t\tSelecting a paper size will force all READER input pages
L11=\t\t\t\t\t\t\tto convert to that paper size.
L12=\t\t\t\t\t\t\tPaper orientation will not be affected.
L13=\n
L14=\tHorizontal scale\tSelect this option if text infringes the right-most print
L15=\t\t\t\t\t\t\tposition, and you want to maintain the horizontal layout of
L16=\t\t\t\t\t\t\tyour document. Text will be auto-scaled in percentage
L17=\t\t\t\t\t\t\tincrements until it will fit on the paper.
L18=\n
L19=\tScale to paper\t\tSelect this option to auto-scale documents in both axes
L20=\t\t\t\t\t\t\tto maintain text on the selected paper size.
L21=\n
L22=\tMinimum margins\tEdit these values to re-define the minimum margins,
L23=\t\t\t\t\t\t\t(crop areas), available on the currently selected printer.
L24=\t\t\t\t\t\t\tIf text infringes these areas, text will be re-positioned
L25=\t\t\t\t\t\t\tto conform to these values.
L26=\n
L27=\tSet margins\t\t\tCheck this box to re-define your document margins as the
L28=\t\t\t\t\t\t\tminimum values. Text will re-format accordingly.
L29=\t\t\t\t\t\t\tScaling is not available if this box is checked.
L30=\n

[WP5ReaderControlsHelp]
L1=\n
L2=\tIf you are working with WordPerfects installed default values, your
L3=\tdocuments may not contain a font description, a paper-size definition
L4=\tor a ruler. Document Conversion Manager will default to Courier 12pt,
L5=\tA4 paper and the WordPerfect default ruler. You may change the font
L6=\tdescription and paper-size defaults.
L7=\n
L8=\tWordPerfect line-draw characters may be stripped and replaced by spaces,
L9=\tor converted as either underscore and bar characters, or as line-draw
L10=\tcharacters in a specified font. Selectable fonts will depend on the
L11=\tavailablility of system fonts and printer fonts.
L12=\n
L13=\tWordPerfect's "Advance" instruction can be converted as a base-line
L14=\tchange or as a font changes. Ami Pro has no concept of Baseline change. 
L15=\tAdvance codes will convert as font changes. Word for Windows has a
L16=\tcorresponding control "Advance", and allows text to be represented in
L17=\ta sub/superscript font.
L18=\tCheck "Baseline change", if available, to maintain the look of your
L19=\tWordPerfect documents.
L20=\tCheck " Font change" to change text to a sub/ superscript font.
L21=\n


[WP5FontMapHelp]
L1=\n
L2=\tThis control enables WordPerfect fonts to be mapped to System and printer fonts.
L3=\tAll mappings are printer dependent. Make sure that you have selected the
L4=\tcorrect printer before doing font mapping. The currently selected
L5=\tprinter-name is displayed at the top of the window.
L6=\t
L7=\tTarget Typeface\t\t\tThis is the typeface to which all WordPerfect fonts listed
L8=\t\t\t\t\t\t\t\t\tin the 'Mapped Typestyles' box will convert.  Which
L9=\t\t\t\t\t\t\t\t\tfonts appear in the 'Mapped Typestyles' box will
L10=\t\t\t\t\t\t\t\t\tchange according to the 'Target Typeface' selected.
L11=\n
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all WordPerfect fonts that have not
L14=\t\t\t\t\t\t\t\t\tbeen mapped to a Target Typeface.
L15=\t\t\t\t\t\t\t\t\tTo map a WordPerfect font :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped WordPerfect font by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those WordPerfect fonts that are
L23=\t\t\t\t\t\t\t\t\tmapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Windows directory you will find WP5FONT.INI.
L27=\n
L28=\tWP5FONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the WordPerfect fonts by a DCM number, name, size, spacing and attribute(s).
L30=\tEdit this file with a text editor like Windows Notepad, to define how your
L31=\tWordPerfect fonts convert for use with your wordprocessor. Make sure that you
L32=\thave read "Using WP5FONT.INI" in the manual, before changing WP5FONT.INI.
L33=\n
L34=\t
L35=\n
L36=\tUnmapped WordPerfect fonts will convert as either Courier, TimesRoman or Helvetic
L37=\tfaces depending on the DCM numbering. See Using WP5FONT.INI for full
L38=\tinformation.
L39=\n


[SysDefHelp]
L1=\n
L2=\tStartup Path\tThis path should contain your source documents.
L3=\t\t\t\t\t\tIts contents will be displayed at program startup.
L4=\n
L5=\n
L6=\tTarget Path\t\tThis path will be set as the default path to which documents
L7=\t\t\t\t\t\twill be sent after conversion.
L8=\n
L9=\n
L10=\tOutput File\t\tAS READ\tOutput extension = Input extension.
L11=\tExtension\t\tFIXED AS\tSet to any valid three character sequence.
L12=\t\t\t\t\t\tNUMERIC\tSelect this item to give your output documents
L13=\t\t\t\t\t\t\t\t\t\ta numeric extension. The extension numbering will
L14=\t\t\t\t\t\t\t\t\t\tincrement as each document is converted. This
L15=\t\t\t\t\t\t\t\t\t\tvalue will not reset on completion.
L16=\n
L17=\n
L18=\tDuplicate File\tSetup rules for output documents with the same name.
L19=\tName
L20=\t\t\t\t\t\tCheck OVERWRITE to automatically overwrite documents.
L21=\t\t\t\t\t\tCheck PROMPT FOR RENAME to display a message that the
L22=\t\t\t\t\t\tdocument exists and request a replacement name or an
L23=\t\t\t\t\t\toverwrite instruction.
L24=\n
L25=\n

[WP5WriterControlsHelp]
L1=\n
L2=\tWordPerfect\t\tChoose the version of WordPerfect that you are using.
L3=\tVersion\t\t\t\tChoose to create style or ruler based documents
L4=\n
L5=\tTab types\t\t\tSelect to set your WordPerfect tabs as absolute or relative.
L6=\n
L7=\tSelect printer\t\tChoose either a WordPerfect or Windows printer driver
L8=\t\t\t\t\t\t\tfor your WordPerfect documents.
L9=\n
L10=\tChange paper\t\tDefault is "No change". READER input page sizes will be
L11=\tsize\t\t\t\t\tconverted exactly into WordPerfect, even if the input form
L12=\t\t\t\t\t\t\tsize is not available on the currently selected printer.
L13=\t\t\t\t\t\t\tSelecting a paper size will force all READER input pages
L14=\t\t\t\t\t\t\tto convert to that paper size.
L15=\t\t\t\t\t\t\tPaper orientation will not be affected.
L16=\n
L17=\tHorizontal scale\tSelect this option if text infringes the right-most print
L18=\t\t\t\t\t\t\tposition, and you want to maintain the horizontal layout of
L19=\t\t\t\t\t\t\tyour document. Text will be auto-scaled in percentage
L20=\t\t\t\t\t\t\tincrements until it will fit on the paper.
L21=\n
L22=\tScale to paper\t\tSelect this option to auto-scale documents in both axes
L23=\t\t\t\t\t\t\tto maintain text on the selected paper size.
L24=\n
L25=\tMinimum margins\tEdit these values to re-define the minimum margins,
L26=\t\t\t\t\t\t\t(crop areas), available on the currently selected printer.
L27=\t\t\t\t\t\t\tIf text infringes these areas, text will be re-positioned
L28=\t\t\t\t\t\t\tto conform to these values.
L29=\n
L30=\tSet margins\t\t\tCheck this box to re-define your document margins as the
L31=\t\t\t\t\t\t\tminimum values. Text will re-format accordingly.
L32=\t\t\t\t\t\t\tScaling is not available if this box is checked.
L33=\n

[UPXFontMapHelp]
L1=\n
L2=\tThis control enables Uniplex fonts to be mapped to System and printer fonts.
L3=\tAll mappings are printer dependent. Make sure that you have selected the
L4=\tcorrect printer before doing font mapping. The currently selected
L5=\tprinter-name is displayed at the top of the window.
L6=\t
L7=\tTarget Typeface\t\t\tThis is the typeface to which all Uniplex fonts listed
L8=\t\t\t\t\t\t\t\t\tin the 'Mapped Typestyles' box will convert.  Which
L9=\t\t\t\t\t\t\t\t\tfonts appear in the 'Mapped Typestyles' box will
L10=\t\t\t\t\t\t\t\t\tchange according to the 'Target Typeface' selected.
L11=\n
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all Uniplex fonts that have not
L14=\t\t\t\t\t\t\t\t\tbeen mapped to a Target Typeface.
L15=\t\t\t\t\t\t\t\t\tTo map a Uniplex font :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped Uniplex font by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those Uniplex fonts that are
L23=\t\t\t\t\t\t\t\t\tmapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Document Conversion Manager directory you will find UPXFONT.INI.
L27=\n
L28=\tUPXFONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the Uniplex fonts by a DCM number, name, size, spacing and attribute(s).
L30=\tEdit this file with a text editor like Windows Notepad, to define how your
L31=\tUniplex fonts convert for use with your wordprocessor. Make sure that you
L32=\thave read "Using UPXFONT.INI" in the manual, before changing UPXFONT.INI.
L33=\n
L34=\tUnrecognised Uniplex fonts will convert as the active font.
L35=\n
L36=\tUnmapped Uniplex fonts will convert as either Courier, TimesRoman or Helvetic
L37=\tfaces depending on the DCM numbering. See Using UPXFONT.INI for full
L38=\tinformation.
L39=\n

[UPXWriterControlsHelp]
L1=\n
L2=\tChange paper\t\tDefault is "No change". READER input page sizes will be
L3=\tsize\t\t\t\t\tconverted exactly into Uniplex, even if the input form
L4=\t\t\t\t\t\t\tsize is not available on your printer.
L5=\t\t\t\t\t\t\tSelecting a paper size will force all READER input pages
L6=\t\t\t\t\t\t\tto convert to that paper size.
L7=\t\t\t\t\t\t\tPaper orientation will not be affected.
L8=\n
L9=\tHorizontal scale\tSelect this option if text infringes the right-most print
L10=\t\t\t\t\t\t\tposition, and you want to maintain the horizontal layout of
L11=\t\t\t\t\t\t\tyour document. Text will be auto-scaled in percentage
L12=\t\t\t\t\t\t\tincrements until it will fit on the paper.
L13=\n
L14=\tScale to paper\t\tSelect this option to auto-scale documents in both axes
L15=\t\t\t\t\t\t\tto maintain text on the selected paper size.
L16=\n
L17=\tMinimum margins\tEdit these values to equal the minimum margins,
L18=\t\t\t\t\t\t\t(crop areas), available on your printer.
L19=\t\t\t\t\t\t\tIf text infringes these areas, text will be re-positioned
L20=\t\t\t\t\t\t\tto conform to these values.
L21=\n
L22=\tSet margins\t\t\tCheck this box to re-define your document margins as the
L23=\t\t\t\t\t\t\tminimum values. Text will re-format accordingly.
L24=\t\t\t\t\t\t\tScaling is not available if this box is checked.
L25=\n

[WFWReaderControlsHelp]
L1=\n
L2=\tWord for Windows line-draw characters may be stripped and replaced by spaces,
L3=\tor converted as either underscore and bar characters, or as line-draw
L4=\tcharacters in a specified font. Selectable fonts will depend on the
L5=\tavailablility of system fonts and printer fonts.
L6=\n
L7=\tSuperscript and subscript controls that change the baseline of text can
L8=\tbe maintained as a baseline change, or converted as a font change. 
L9=\tWordPerfect has a corresponding control "Advance", and allows text to 
L10=\tbe represented in a sub/superscript font.
L11=\tAmi Pro has no concept of baseline change.
L12=\n
L13=\n


[450ReaderControlsHelp]
L1=\n
L2=\tOfficePower v450 documents do not contain controls that describe the
L3=\tpage size, page orientation, font and font-size. The Default settings  
L4=\tprovide DCM with information necessary to lay text onto an appropriate  
L5=\tpaper-size.
L6=\tIn your Windows directory you will find 450FONT.INI. This file contains
L7=\tdefinitions for paper-sizes and fonts that should be edited to conform
L8=\tto your OfficePower system settings.
L9=\tDCM uses the paper-size definitions as a preference list. This means
L10=\tthat, with "paper-size = Auto Select" and "font = Auto Select",  
L11=\tDCM will attempt to fit text on to the first paper-size defined in the
L12=\tlist using the first font definition in the font list. If text will 
L13=\tnot fit using the first font, DCM moves down the list in sequence looking 
L14=\tfor a fit. If all fonts fail to produce a fit DCM repeats this process
L15=\twith the next paper-size in the list. If no fit is found DCM defaults
L16=\tto the default Windows form size and system font, or A4 12 pitch if no 
L17=\tprinter has been defined.
L18=\tIf your OfficePower documents always conform to a standard layout,
L19=\tselect the correct paper-size and font defintion
L20=\n
L21=\tSub/Superscript\tChoose either a base-line change or a font change.
L22=\thandling\t\t\t\tThis option will not be selectable if your wordprocessor
L23=\t\t\t\t\t\t\tdoes not support baseline changes.
L24=\n
L25=\n


[WFWFontMapHelp]
L1=\n
L2=\tThis control enables Word for Windows fonts to be mapped to System and 
L3=\tprinter fonts. All mappings are done for specific devices. Make sure 
L4=\tthat you have selected the correct printer before doing font mapping.
L5=\tThe currently selected printer-name is displayed at the top of the window.
L6=\t
L7=\tTarget Typeface\t\t\tThis is the typeface to which all Word for Windows fonts
L8=\t\t\t\t\t\t\t\t\tlisted in the 'Mapped Typestyles' box will convert.
L9=\t\t\t\t\t\t\t\t\tWhich fonts appear in the 'Mapped Typestyles' box
L10=\t\t\t\t\t\t\t\t\twill change according to the 'Target Typeface'
L11=\t\t\t\t\t\t\t\t\tselected.
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all Word for Windows fonts that 
L14=\t\t\t\t\t\t\t\t\thave not been mapped to a Target Typeface.
L15=\t\t\t\t\t\t\t\t\tTo map a Word for Windows font :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped Word for Windows font by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those Word for Windows fonts that
L23=\t\t\t\t\t\t\t\t\tare mapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Windows directory you will find WFWFONT.INI.
L27=\n
L28=\tWFWONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the Word for Windows fonts by a DCM number, name, size, spacing and
L30=\tattribute(s). 
L31=\tEdit this file with a text editor like Windows Notepad, to define how your
L32=\tWord for Windows fonts convert for use with your wordprocessor. Make sure that you
L33=\thave read "Using WFWFONT.INI" in the manual, before changing WFWFONT.INI.
L34=\n
L35=\n
L36=\tUnmapped Word for Windows fonts will convert as either Courier, TimesRoman or Helvetic
L37=\tfaces depending on the DCM numbering. See Using WFWFONT.INI for full
L38=\tinformation.
L39=\n


[650ReaderControlsHelp]
L1=\n
L2=\tOfficePower v650 documents need not contain controls that describe the
L3=\tpage size, page orientation, font and font-size. The Default settings  
L4=\tprovide DCM with information necessary to lay text onto an appropriate  
L5=\tpaper-size, when this information is not present in the document.
L6=\tIn your Windows directory you will find 650FONT.INI. This file contains
L7=\tdefinitions for paper-sizes and fonts that should be edited to conform
L8=\tto your OfficePower system settings.
L9=\tDCM uses the paper-size definitions as a preference list. This means
L10=\tthat, with "paper-size = Auto Select" and "font = Auto Select",  
L11=\tDCM will attempt to fit text on to the first paper-size defined in the
L12=\tlist using font definitions in the [650fonts] list. If text will 
L13=\tnot fit using the first font, DCM moves down the list in sequence looking 
L14=\tfor a fit. If all fonts fail to produce a fit DCM repeats this process
L15=\twith the next paper-size in the list. If no fit is found DCM defaults
L16=\tto the default Windows form size and system font, or A4 12 pitch if no 
L17=\tprinter has been defined.
L18=\tIf your OfficePower documents always conform to a standard layout,
L19=\tselect the correct paper-size and font defintion
L20=\n
L21=\tLine draw characters can either be stripped, or converted as bar
L22=\tcharacters (ANSI), or as true linedraw characters in a prefered font.
L23=\tIf the font you select does not contain the linedraw characters your
L24=\tlinedraw characters will convert as upper case "U umlaut" and "A angstrom".
L25=\n
L26=\tSub/Superscript\tChoose either a base-line change or a font change.
L27=\thandling\t\t\t\tThis option will not be selectable if your wordprocessor
L28=\t\t\t\t\t\t\tdoes not support baseline changes.
L29=\n
L30=\n



[650FontMapHelp]
L1=\n
L2=\tThis control enables OfficePower fonts to be mapped to System and 
L3=\tprinter fonts. All mappings are done for specific devices. Make sure 
L4=\tthat you have selected the correct printer before doing font mapping.
L5=\tThe currently selected printer-name is displayed at the top of the window.
L6=\t
L7=\tTarget Typeface\t\t\tThis is the typeface to which all OfficePower fonts
L8=\t\t\t\t\t\t\t\t\tlisted in the 'Mapped Typestyles' box will convert.
L9=\t\t\t\t\t\t\t\t\tWhich fonts appear in the 'Mapped Typestyles' box
L10=\t\t\t\t\t\t\t\t\twill change according to the 'Target Typeface'
L11=\t\t\t\t\t\t\t\t\tselected.
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all OfficePower fonts that 
L14=\t\t\t\t\t\t\t\t\thave not been mapped to a Target Typeface.
L15=\t\t\t\t\t\t\t\t\tTo map an OfficePower font :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped OfficePower font by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those OfficePower fonts that
L23=\t\t\t\t\t\t\t\t\tare mapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Windows directory you will find 650FONT.INI.
L27=\n
L28=\t650FONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the OfficePower fonts by a DCM number, name, size, spacing and 
L30=\tattribute(s).
L31=\tEdit this file with a text editor like Windows Notepad, to define how your
L32=\tOfficePower fonts convert for use with your wordprocessor. Make sure that you
L33=\thave read "Using 650FONT.INI" in the manual, before changing 650FONT.INI.
L34=\n
L35=\n
L36=\tUnmapped OfficePower fonts will convert as either Courier, TimesRoman or 
L37=\tHelvetic faces depending on the DCM numbering. See Using 650FONT.INI 
L38=\tfor full information.
L39=\n

[450FontMapHelp]
L1=\n
L2=\tThis control enables OfficePower fonts to be mapped to System and
L3=\tprinter fonts. All mappings are done for specific devices. Make sure
L4=\tthat you have selected the correct printer before doing font mapping.
L5=\tThe currently selected printer-name is displayed at the top of the window.
L6=\n
L7=\tTarget Typeface\t\t\tThis is the typeface to which all OfficePower fonts
L8=\t\t\t\t\t\t\t\t\tlisted in the 'Mapped Typestyles' box will convert.
L9=\t\t\t\t\t\t\t\t\tWhich fonts appear in the 'Mapped Typestyles' box
L10=\t\t\t\t\t\t\t\t\twill change according to the 'Target Typeface'
L11=\t\t\t\t\t\t\t\t\tselected.
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all OfficePower fonts that
L14=\t\t\t\t\t\t\t\t\thave not been mapped to a Target Typeface.
L15=\t\t\t\t\t\t\t\t\tTo map an OfficePower font :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped OfficePower font by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those OfficePower fonts that are
L23=\t\t\t\t\t\t\t\t\tmapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Windows directory you will find 450FONT.INI.
L27=\n
L28=\t450FONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the OfficePower fonts by a DCM number, name, size, spacing and
L30=\tattribute(s).
L31=\tEdit this file with a text editor like Windows Notepad, to define how your
L32=\tOfficePower fonts convert for use with your wordprocessor. Make sure that you
L33=\thave read "Using 450FONT.INI" in the manual, before changing 450FONT.INI.
L34=\n
L35=\n
L36=\tUnmapped OfficePower fonts will convert as either Courier, TimesRoman or 
L37=\tHelvetic faces depending on the DCM numbering. See Using 450FONT.INI 
L38=\tfor full information.
L39=\n

[DOCFontMapHelp]
L1=\n
L2=\tThis control enables DCA typestyles to be mapped to System and printer fonts.
L3=\tAll mappings are printer dependent. Make sure that you have selected the
L4=\tcorrect printer before doing typestyle mapping. The currently selected
L5=\tprinter-name is displayed at the top of the window.
L6=\t
L7=\tTarget Typeface\t\t\tThis is the typeface to which all DCA typestyles listed
L8=\t\t\t\t\t\t\t\t\tin the 'Mapped Typestyles' box will convert.  Which
L9=\t\t\t\t\t\t\t\t\ttypestyles appear in the 'Mapped Typestyles' box will
L10=\t\t\t\t\t\t\t\t\tchange according to the 'Target Typeface' selected.
L11=\n
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all DCA typestyles that have not
L14=\t\t\t\t\t\t\t\t\tbeen mapped to a Target Typeface. To map a DCA
L15=\t\t\t\t\t\t\t\t\ttypestyle :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped DCA typestyle by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those DCA typestyles that are
L23=\t\t\t\t\t\t\t\t\tmapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Document Conversion Manager directory you will find DOCFONT.INI.
L27=\n
L28=\tDOCFONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the DCA typestyles by number, name, size, spacing and attribute(s).
L30=\tEdit this file with a text editor like Windows Notepad, to define how your
L31=\tDCA typestyles convert for use with your wordprocessor. Make sure that you
L32=\thave read "Using DOCFONT.INI" in the manual, before changing DOCFONT.INI.
L33=\n
L34=\tNon-mapped typestyle conversion defaults are :
L35=\n
L36=\t\t\tFixed pitch and PSM typestyles\t=  Courier.
L37=\t\t\tScalable typestyles\t\t\t\t=  TimesNewRoman/Helvetic
L38=\n
L39=\n

[RFTFontMapHelp]
L1=\n
L2=\tThis control enables source font families to be mapped to DCA typestyles.
L3=\tThe Reader Font is the font being mapped. The DCA typestyle list in the
L4=\tMapped Typestyle box is the range of typestyles to which the Reader font
L5=\twill be converted. DCM automatically tests the height of the Reader font
L6=\tfor a matching DCA typestyle in the list. If a perfect match is not found
L7=\tDCM will convert at the nearest lower size available in the list.
L8=\tMultiple mapping to DCA typestyles is allowed. This enables round-tripping
L9=\tto be user definable.
L10=\n
L11=\tExample
L12=\tReader Font = 11,Courier
L13=\tMapped Typestyles contains :  11,Courier 10
L14=\t\t\t\t\t\t\t\t\t\t\t85,Prestige Elite 12
L15=\t\t\t\t\t\t\t\t\t\t\t223,Courier 15
L16=\t\t\t\t\t\t\t\t\t\t\t252,Courier 17
L17=\tA Reader Courier font, size 12pt will convert to typestyle 11
L18=\tA Reader Courier font, size 10pt will convert to typestyle 85
L19=\tA Reader Courier font, size  8pt will convert to typestyle 223
L20=\tA Reader Courier font, size  6pt will convert to typestyle 252
L21=\n
L22=\n
L23=\tIn your Windows directory you will find DOCFONT.INI.
L24=\tThis file is used by the DCA READER and the DCA WRITER
L25=\n
L26=\n
L27=\nDCA READER
L28=\tDOCFONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the DCA typestyles by number, name, size, spacing and attribute(s).
L30=\tEdit this file with a text editor like Windows Notepad, to define how your
L31=\tDCA typestyles convert for use with your wordprocessor. Make sure that you
L32=\thave read "Using DOCFONT.INI" in the manual, before changing DOCFONT.INI.
L33=\n
L34=\tDCA WRITER
L35=\tDOCFONT.INI is used as the source for the Available Typestyles box.
L36=\tIf you are using DCA Typestyles that are not listed, you can add
L37=\ttypestyle descriptions by editing this file with a text editor.
L38=\n
L39=\n

[RFTWriterControlsHelp]
L1=\n
L2=\tChange paper\t\tDefault is "No change". READER input page sizes will be
L3=\tsize\t\t\t\t\tconverted exactly into Uniplex, even if the input form
L4=\t\t\t\t\t\t\tsize is not available on your printer.
L5=\t\t\t\t\t\t\tSelecting a paper size will force all READER input pages
L6=\t\t\t\t\t\t\tto convert to that paper size.
L7=\t\t\t\t\t\t\tPaper orientation will not be affected.
L8=\n
L9=\tHorizontal scale\tSelect this option if text infringes the right-most print
L10=\t\t\t\t\t\t\tposition, and you want to maintain the horizontal layout of
L11=\t\t\t\t\t\t\tyour document. Text will be auto-scaled in percentage
L12=\t\t\t\t\t\t\tincrements until it will fit on the paper.
L13=\n
L14=\tScale to paper\t\tSelect this option to auto-scale documents in both axes
L15=\t\t\t\t\t\t\tto maintain text on the selected paper size.
L16=\n
L17=\tMinimum margins\tEdit these values to equal the minimum margins,
L18=\t\t\t\t\t\t\t(crop areas), available on your printer.
L19=\t\t\t\t\t\t\tIf text infringes these areas, text will be re-positioned
L20=\t\t\t\t\t\t\tto conform to these values.
L21=\n
L22=\tSet margins\t\t\tCheck this box to re-define your document margins as the
L23=\t\t\t\t\t\t\tminimum values. Text will re-format accordingly.
L24=\t\t\t\t\t\t\tScaling is not available if this box is checked.
L25=\n

[AMPReaderControlsHelp]
L1=\n
L2=\tAmi Pro line-draw characters may be stripped and replaced by spaces,
L3=\tor converted as either underscore and bar characters, or as line-draw
L4=\tcharacters in a specified font. Selectable fonts will depend on the
L5=\tavailablility of system fonts and printer fonts.
L6=\n
L7=\tSuperscripted and subscripted text can be converted as a baseline
L8=\tchange, or converted as a font change. 
L9=\tWordPerfect has a corresponding control "Advance", and allows text to 
L10=\tbe represented in a sub/superscript font.
L11=\t
L12=\n
L13=\n

[AMPFontMapHelp]
L1=\n
L2=\tThis control enables Ami Pro fonts to be mapped to System and 
L3=\tprinter fonts. All mappings are done for specific devices. Make sure 
L4=\tthat you have selected the correct printer before doing font mapping.
L5=\tThe currently selected printer-name is displayed at the top of the window.
L6=\t
L7=\tTarget Typeface\t\t\tThis is the typeface to which all Ami Pro fonts
L8=\t\t\t\t\t\t\t\t\tlisted in the 'Mapped Typestyles' box will convert.
L9=\t\t\t\t\t\t\t\t\tWhich fonts appear in the 'Mapped Typestyles' box
L10=\t\t\t\t\t\t\t\t\twill change according to the 'Target Typeface'
L11=\t\t\t\t\t\t\t\t\tselected.
L12=\n
L13=\tUnmapped Typestyles\t\tThis box displays all Ami Pro fonts that 
L14=\t\t\t\t\t\t\t\t\thave not been mapped to a Target Typeface.
L15=\t\t\t\t\t\t\t\t\tTo map a Word for Windows font :
L16=\t\t\t\t\t\t\t\t\t\t-   Select a Target Typeface.
L17=\t\t\t\t\t\t\t\t\t\t-   Highlight the unmapped Ami Pro font by
L18=\t\t\t\t\t\t\t\t\t\t    clicking with the mouse.
L19=\t\t\t\t\t\t\t\t\t\t-   Press the ADD button.
L20=\n
L21=\n
L22=\tMapped Typestyles\t\tThis box displays those Ami Pro fonts that
L23=\t\t\t\t\t\t\t\t\tare mapped to the currently selected Target Typeface.
L24=\n
L25=\n
L26=\tIn your Windows directory you will find AMPFONT.INI.
L27=\n
L28=\tAMPONT.INI is an ASCII text file comprised of comma separated records that
L29=\tdefine the Ami Pro fonts by a DCM number, name, size, spacing and
L30=\tattribute(s). 
L31=\tEdit this file with a text editor like Windows Notepad, to define how your
L32=\tAmi Pro fonts convert for use with your wordprocessor. Make sure that you
L33=\thave read "Using AMPFONT.INI" in the manual, before changing AMPFONT.INI.
L34=\n
L35=\n
L36=\tUnmapped Ami Pro fonts will convert as either Courier, TimesRoman or Helvetic
L37=\tfaces depending on the DCM numbering. See Using AMPFONT.INI for full
L38=\tinformation.
L39=\n
