**************************************************
****  HP DESIGNJET 750/755C DIAGNOSTICS V1.0  ****
**************************************************

These service diagnostics operate using  WINDOWS. Do NOT run them 
directly from DOS.

==========================
== INSTALATION PROCESS. ==
==========================

Installation is  not  automatic (although it will be, for  future 
releases).

 (1) Create a directory on the destination drive.

  Note: The diagnostics  program does  not place files outside the 
  ----  directory  you  create. Deleting  the directory  after the 
        tests leaves the PC as it was before the tests.

 (2) Copy the following files to the directory you created.

	 bc40rtl.dll
	 bwcc.dll
	 dj750c.exe
	 dj750c.ini 
	
 Note: THE HELP FACILITY IS NOT  INCLUDED YET, so avoid  to  press
 ----  the help button not to obtain an error.


 (3) Drag dj250c.exe from the  File Manager to a Program Group to 
create the icon of the program.

 Note: If you use a floppy disk, DO NOT PROTECT it against WRITE. 
 ----  During  the diagnostic  testing, the .ini is modified, and 
       some temporary files are created.
   	
===============================
== STARTING THE DIAGNOSTICS. ==
===============================

 1- Make sure that the correct serial cable is connected between
    the computer  and  the  plotter (For a 9-pin HP Vectra port,  
    this should be cable with part number 24542G.) 

 2- Execute dj750c.exe from the File Manager, or double click on
    the diagnostics icon.

 3- Turn on the plotter while pressing the 'Previous' button  on 
    the plotter's front panel.

 4- Find out the  serial-port configuration of the plotter. 

 5- Click on the CONNECT  button  on  the  main  window  of  the 
    diagnostics.

 6- Make sure that the computer serial-port configuration matches 
    the plotter's SetUp.

 7- Once connected, perform the individual diagnostics.

 Note: The Y-axis  test  is  quite  long  (especially for E-size  
 ----  plotters).  

 Note: You need a special  tool to  perform the  Pen Height test.      
 ----  

 Note: You need a special  tool to  perform the  Primer/Cap test.      
 ----  

 Note: THE HELP FACILITY IS NOT  INCLUDED YET, so avoid  to  press
 ----  the help button not to obtain an error.

==========================
== SUGGESTIONS.         ==
==========================

 Please  send  any  suggestion as  to how  the program  could be 
 improved to:

      Ramon BARBA / ALIBER/00

 Regards.
 Ramon Barba (Technical Marketing. BCD)