Connecting Audio Signals
Audio input and output connections on the rear of the Avid Mojo DNA use standard RCA connectors. Audio connections require the following:
 | |
Four audio cables with RCA connectors on both ends of the cable. You
can also use audio cables with RCA connectors on one end and XLR
connectors on the other end.
|
| |
A video deck or audio device with audio input and output connections.
|
To connect your audio to a deck or audio device:
| 1. | |
Attach two audio cables to the Audio input connectors (see The
following figure):
|
 | |
Your cables might be color-coded with red and white connectors. If so,
match the colors on the RCA connectors with the color of the inputs on the
Avid Mojo DNA.
|
| |
If you have RCA-to-XLR connectors on your audio cables, you must pay
attention to the male and female XLR connections attached to your audio
device.
|
| a. | |
Connect an RCA connector to the red Audio input connector on
the Avid Mojo DNA.
|
| b. | |
Connect an RCA connector to the white Audio input connector on
the Avid Mojo DNA.
|
| 2. | |
Attach the other end of the audio cables (or XLR connectors) to Audio
output connectors on your deck or audio device.
|
| 3. | |
Attach two more audio cables to the Audio output connectors (see The
following figure):
|
| a. | |
Connect an RCA connector to the red Audio output connector on
the Avid Mojo DNA.
|
| b. | |
Connect an RCA connector to the white Audio output connector
on the Avid Mojo DNA.
|
| 4. | |
Attach the other end of the last two audio cables (or XLR connectors)
to Audio input connectors on your deck or audio device.
|
