Starting the Avid application with the Yamaha 01V Attached
When you start your Avid system with the Yamahaá01V attached, you can use the faders for mixing audio channels or for performing automation gain recording. You use the Home and OptionáI/O buttons to switch between the two modes. This section describes how the Yamaha 01V utilizes the faders.
The Yamaha 01V digital mixer allows you to work with 24 input channels as follows:
 | |
12 mono input channels (1 through 12)
|
| |
2 stereo input channels (13/14 and 15/16)
|
| |
8 digital inputs (17 through 24)
|
Channels 17 through 24 use the same physical controls as channels 1 through 8 as shown in the following illustration. You use the Home and Option I/O buttons to switch the assignments from 1 through 8 to 17 through 24.
When you start the Avid system, it automatically configures the Yamaha 01V to use channels 17 through 24 for automation gain control. Use the Home and Option I/O buttons to switch between audio mixing (Home) and audio gain recording (Option I/O).
 | |
The Yamaha 01V supports a digital I/O option that uses channels 17
through 24. If you intend to use the digital I/O option, you should move
these to channels 1 through 8 using the SWAP mode. You can access SWAP
mode from pane 5 of the Option I/O screen. For more information, see the
Yamaha documentation.
|
