The D-fx Ping-Pong Delay plug-in has the following parameters:

Allows you to adjust the input volume of the Ping-Pong Delay to prevent clipping or increase the level of the processed signal.

Allows you to adjust the balance between the Dry (source) signal and the Wet (processed) signal, giving you control over the depth of the effect.

Sets the delay time between the original signal and the delayed signal. The higher the setting, the longer the delay. This parameter is adjustable from 0átoá1500 milliseconds (1.5 seconds).

Controls the cutoff frequency of the Lowpass Filter, allowing you to attenuate the high frequency content of the feedback signal. The lower the setting, the more high frequencies are removed from the feedback signal. The range of the Lowpass Filter is 20áHz to 19.86ákHz, with a maximum value of Off (which effectively means bypass).

Controls the amount of feedback applied from the output of the delay into its input. It also controls the number of repetitions of the delayed signal.