The D-fx Multi-Tap Delay plug-in has the following parameters:

Controls the input level of each of the four delay lines for individual delay taps. Adjust Gain to prevent clipping or increase the level of the processed signal.

Controls the amount of feedback applied from the output of the delay into its input. It also controls the number of repetitions of the delayed signal. For the feedback parameter to function, the Gain slider must be raised above its lowest setting.

Sets the delay time between the original signal and the delayed signal. The higher the setting, the longer the delay. This parameter is adjustable from 0átoá1500 milliseconds (1.5áseconds).

Allows you to adjust the balance between the Dry (source) signal and the Wet (processed) signal, giving you control over the depth of the effect.