Selecting a Deck
The Deck Selection pop-up menu in the Capture tool contains a list of decks or cameras that were connected to the system, powered up, and initialized when you opened the Capture tool. The first deck or camera in the list is selected by default, unless all decks or cameras are offline.
To activate playback from an available deck or camera, do one of the
following:
|
|
Click the pop-up menu, and select the name of a previously configured
deck or camera.
|
|
|
|
Select Auto-configure to automatically establish the default deck
settings for a VTR that is currently connected to the system.
|
 | |
Not all DV devices respond to the Auto-configure command. Due to this
limitation, Auto-configure selects only the generic devices. When a digital
camera is attached to your system, click the Device pop-up menu in the
Deck Settings dialog box and select the proper device. When a deck with a
transcoder is attached, click the Device pop-up menu and select the
applicable deck.
|
| |
Device templates from older Avid systems are not compatible with Avid
Mojo DNA systems. Do not copy Meridien templates to Avid Mojo DNA
systems, and do not copy Avid Mojo templates to Meridien systems.
|
If you forgot to turn on or connect a deck or camera before entering
Capture mode:
| 1. | |
Make sure that the deck is connected and the power is turned on.
|
| 2. | |
Click the Deck Selection pop-up menu in the Capture tool, and select
Check Decks to reestablish deck control.
|
