This README file contains known issues, last-minute info and important information regarding version 8.0 of InstantCopy. For installation notes and information on how to use the software, please refer to the manual.

Introduction

Before calling technical support, be sure to peruse this README file, which includes known issues and limitations. Also, check for new software updates by visiting www.pinnaclesys.com in the InstantCopy support section.

Registration

Known Issues

1. You may encounter errors when trying to copy certain types of discs and in different modes. For example, trying to copy a disc in RAW mode - not all burners support RAW mode copying. If you encounter an error when copying, please make sure that your burner supports the type of mode you are copying in.

2. In order to insure success when writing to multiple burners, the burners should all be the same model number with the same firmware. We cannot guarantee that you will successfully burn to multiple drives if you are using different burners since each burner requires a different command set.

3. InstantCopy will give you good results when using the automatic setting when copying a dual-layer 9GB DVD to a 4.7GB recordable DVD. You can also manually increase the quality of the video by removing audio tracks (especially large DTS audio tracks) as this will increase the amount of bits that can be applied to the video.