B∞hem tvorby webovsk²ch strßnek v∞novan²ch DVD byla vyu₧φvßna mechanika
DVD uvedenΘ znaΦky.
Mechanika byla zap∙jΦena plze≥skou poboΦkou firmy COMFOR - http://www.comfor.cz/
Parametry mechaniky Toshiba SD-M1502
General Features
Tray Loading Mechanism
3-way Disc Eject (eject button, software, emergency eject hole)
Average Access Time
CD: 95ms
DVD: 115ms
DAE (Digital Audio Extraction) Audio Capability
MPC3 Compatibility
Multi-Read Capability
Regionalization (RPC2 compliance) (DVD)
Drive Speed
DVD 16X SINGLE LAYER
10X DUAL LAYER
CD 48X
BUS Interface
ATAPI
Types of Disc Formats Supported
DVD:
DVD-ROM
DVD-5 - Single-sided/Single Layer
DVD-9 - Single-sided/Dual Layer
DVD-10 - Double-sided/Single Layer
DVD-18 - Double-sided/Dual Layer
DVD-R (Read)
CD:
CD-DA
CD+(E)G
CD-MIDI
CD-TEXT
CD-ROM
CD-ROM-XA
CD-I Bridge (Photo-CD, Video CD)
CD-I
Multi-session (Photo-CD, CD Extra, CD-RW, CD-R)
CD-R (Read)
CD-RW (Read)
Front Panel
This DVD-ROM drive should be used only in its current hardware and
software configuration.
Figure 1 - SD-M1502 DVD-ROM Front Panel
Eject Button The EJECT button is used to open the disc tray so you
can install or remove a disc.
Busy
Indicator When you install a disc into the DVD-ROM drive, the BUSY
light flashes slowly as it attempts to locate the disc. One of the following
will occur:
BUSY light goes out. The DVD-ROM drive is ready to read data from the
disc.
BUSY light flashes slowly. The disc may be dirty.
BUSY light remains ON. The DVD-ROM is accessing data.
BUSY light remains ON indefinitely. The DVD-ROM is experiencing an
error
Emergency
Eject Hole The emergency eject hole is to be used only when the DVD
tray will not open when EJECT button is pressed.
DVD mechanika Toshiba SD-M1502 byla zap∙jΦena firmou
|