Q.
With many ftp servers Net Vampire works, with others not.
Here an example where CuteFTP could get the index but NetVampire not:
[...]
A.
Both IE 4 and Netscape 4 treat ftp paths as absolute, and Net Vampire
follows this convention. CuteFTP, to the contrary, treats them as relative
paths, that's why by specifying the root directory in the URL
(i.e., ftp://24.226.3.208/ ) you obtain a listing for the /music directory.
Try adding the path to the URL: ftp://24.226.3.208/music - this will work for
both Net Vampire and your browser. The root directory at this server cannot be
listed because the administrator has disabled this option.
|
|
|
Q.
How about an indication that a file can be restarted?
A.
Restart support is indicated with a small green icon to
the left of the Job entry in the list.
|
|
|
|
Q.
I turned off the Monitor Browser Clicks option and restarted the browser,
but the changes didn't take affect.
A.
On some systems, especially the ones that have Active Desktop installed, Internet Explorer
doesn't get unloaded when you close the browser window. You need to reboot your computer.
|
|
|
|
Q.
In NV 2.41 I had the ability to run a job after the
previous one finished. What's the equivalent in NV 3.0 so that I can single thread my
jobs without any user intervention?
A.
In NV3, you can set the Max. Concurrent Connections option to 1 in the
Network Settings dialog to emulate sequential mode.
Note that this setting has priority over Max. Connections Per Site, the
option that you set individually for each site.
|
|
|
|
Q.
I can't seem to find a way to single thread jobs from multiple sites. I
can set max connections to 1 but this only works for jobs from the same site.
Am I missing something?
A.
Network Settings / Max. Concurrent Connections limits the total number of
connections, while Site Settings / Max. N Connections Per Site applies to
the selected site.
|
|
|
|
Q.
I have a dialup password stored in my phonebook, but Net Vampire ignores it.
A.
Net Vapmire doesn't use the password saved in the
Dialup Phonebook. You have to type your password in the Password field of the
Dial-Up settings dialog.
|
|
|
|
Q.
I am unable to download MP3 files from
http://matter.cc.brandeis.edu/ignatiev/cgi/k2w.cgi/ignatiev/MP3/arrivals?k2w.cgi
A.
This site requires the users to provide a correct Referrer header in the request.
Open the Job Settings dialog in Net Vampire and type
'http://matter.cc.brandeis.edu/ignatiev/MP3/' in the Referrer edit box.
|
|
|
|
Q.
My HTTP proxy doesn't support FTP restart.
A.
Try using either the CONNECT proxy mode or Socks4 mode. Use the same proxy address
as in HTTP Proxy mode. The port number should be the same for CONNECT
and 1080 for Socks.
|
|
|
|
Q.
Since the software relies on a browser of some sort to browse through
ftp site, I wonder how I can handle site that are not anonymous.
A.
To browse a non-anonymous ftp site with IE or Netscape, add your login
info to the url: ftp://username:password@host/dir/
If you drag a link to NV from the browser, login info is passed to NV as well.
|
|
|
|
Q.
When the data stops coming, NV keeps waiting instead of restarting immediately.
A.
Use the Timeout / Data setting in the Site Settings dialog to specify for how long
NV will wait for the data before restarting.
The default value is 500 seconds which guarantees that NV will not
break the connection by mistake even with very slow sites.
This is a site-specific setting, i.e., once set, it will be used by all Jobs
downloading from this site.
|
|
|
|
Q.
Is there any way you can set the default directory to save the files.
A.
The Destination Folders list in the Destination Folders dialog has
a DEFAULT entry. All files with extensions not listed in other groups
go to this folder.
|
|
|
|
Q.
I do mass downloads. With the old one, if I already had downloaded a
file it would pop up and say file already exists this version seems to
download it to as a temp files. So I could download duplicate files.
A.
This feature allows to download different files having the same name - some file
names, such as index.html, are very popular. NV2 didn't allow to work
with more than one such file at a time, but NV3 doesn't have this limitation.
However, it checks for duplicate file names in the job list and suggests
to add a url to the location list of the existing job rather than create a
new job. Duplicate _URLs_ are always rejected.
|
|
|
|
Q.
How can I make Norton AntiVirus check my downloaded files?
A.
- on the NV3 top menu panel, go to: "Options | System Settings | Post-processing";
- check the "Run Program" box, select the 2nd radio button (unlabeled);
- enter the path to the NAV program (or use the "browse" feature to find it).
|
|
|
|
Q.
In the window 'proxy settings' most of the fields are disabled
A.
Only the options applicable to the selected proxy type are enabled
in the Proxy Settings dialog. When you click on another radio button
in the Type group, all applicable fields will be enabled.
To enable the User and Password fields, check the Authenticate box.
|
|
|
|
Q.
How can I resume a download started by another program?
A.
Use the Import Partial File command in the Jobs section of the Main Menu
|
|
|
|
Q.
How do I list url links in the downloaded web page?
A.
Just select the file in the JobList and click on the Links tab.
|
|
|
|
Q.
NV3 seems to only download 4 or 5 files at a time even with max current
connections set to 25.
A.
NV3 allows you to specify both the total number
of concurrent connections and the max. number of
connections to each site individually. The
latter is handy when you are connecting to a site
that allows a limited number of concurrent
anonymous connections.
To change this setting, rightclick on the job and
select Site Settings in the popup menu.
You can change the default value for this setting
(the one that will be used for all new sites) in
Options / Default / Site Settings.
|
|
|
|
Q.
What is the History File for?
A.
NV3 keeps a full list of Jobs, either completed or deleted before completion,
in the History file. Select File / View History file in the main menu to open
this file in your browser. The file is html-formatted, so you can re-add
any Job by Alt-clicking on the link or by dragging the link from the History file
to NV. For successfully completed Jobs, you can click on the 'local link' to open
the received file.
|
|
|
|
Q.
How to activate sound?
A.
- Select the Sounds tab page in the System Settings dialog;
- Check the Sounds Enabled checkbox;
- Select the event you want to be confirmed with a sound in the list of events;
- Select the desired sound from the drop-down list or click the Browse button
and select a WAV file;
- Click the Play button to test the selected sound;
- Click the OK button.
|
|
|
|
Q.
Do I need to change any settings before I start downloading files?
A.
The default settings work well in most cases. You don't have to change anything
to make the program work, except for the proxy and dial-up settings, as described
in the Quick Start section. The rest of the settings allow you
to fine-tune NV and make it even more efficient. However, since network conditions
may vary greatly, you will need to do some experimenting in order to find optimum values.
|
|
|
|
Q.
How to switch between the split-window and multi-column view modes?
A.
A small button at the bottom of the left panel does the trick.
|
|
|
|
Q.
Why are the job settings split between 2 dialogs?
A.
The settings in these dialogs apply to different objects. If you change something
in the Job Settings dialog, it will only affect the selected job; any changes
in the Site Settings dialog will affect all jobs downloading from this site.
|
|
|
|
Q.
What are job priorities for?
A.
Currently Net Vampire selects the next Job to start randomly, which gives all Jobs
a chance to start. The Priority setting in the Job Settings dialog
(1 is lowest, 9 is highest) allows to give some Jobs more chances
to start than the others.
|
|
|
|
Q.
I have one site that freezes up when entering pasv mode. It would be nice
to have a switch for whether or not to use pasv mode for specific sites.
A.
You can add two entries to the proxy list, one with PASV on and one with PASV off -
then you will be able to select desired configuration for each site from the dropdown list.
|
|
|
|
Q.
Net Vampire doesn't seem to hangup.
A.
NV will only hang up connections established using the Phone Book entry
selected in the Dial Up Settings dialog - dropping all modem connections
would cause problems to those who have more than one connection (some
people use the modem for online banking, FIDO, etc.). To make Hangup
work properly, select the correct phonebook entry even if you are not
using the Dial-Up feature.
|
|
|
|
Q.
I tried to run Net Vampire and got the following message:
'This control requires version 4.70 or greater of COMCTL32.DLL'.
I am using Netscape 4.04, not Internet Explorer.
A.
Fortunately, Microsoft made its new DLLs available separately
from the browser. Find the file called '40comupd.exe' using
the following
query
and run it - this will update the DLLs on your system.
|
|
|
|
Q.
In version 2.41 I used
to delete the job and restart with the same filename but different location.
This seems to be impossible to do in V 3.0
A.
With Net Vampire 3 you don't need to delete and re-create jobs and import
partially received files. You can add alternative locations to the
same job and switch between them on the fly using the Locations command
in the popup menu.
When you change locations, don't forget to check off the Ignore File Time
Change option in the Job Settings dialog as file date/time is usually
different on different servers.
|
|
|
|
Q.
How to use the following setting: 'Process VSL files'? What is VSL and what
is the effect of having it ON and OFF?
A.
www.download.com provides its own method of file downloading. When you
click the Download Now button at this site, it sends you a small VSL file
with downloading instructions instead of the file that you requested. Net
Vampire will parse this file and follow the instructions in it
if this option is turned on, otherwise it will just save the VSL file
on the disk.
|
|
|
|
Q.
When do we use HTTP Get/Post, HTTP Connect, ... SocksV4?
A.
An http proxy can be used for both web and ftp downloads. The standard mode
of such proxies is HTTP Get/Post. If you are not satisfied with the proxy
behavior - for example, if it keeps sending you a corrupted file from its
cache instead of requesting a fresh copy from the remote server, or if it
doesn't support restart for ftp downloads, try other proxy options.
If you have an FTP proxy, try using it for ftp downloads instead of an http
proxy. NV supports 4 different ftp proxy login schemes - try each of them
to see which one is appropriate for your proxy, or ask your network
administrator which scheme to use.
HTTP Connect and SocksV4 modes emulate direct connection to the remote
server - i.e., in these modes the proxy is not allowed to modify your
queries and remote server replies.
For more details, see the Proxy Support section.
|
|
|
|
Q.
What should we use for the following settings : Default for Gopher,
Default for HTTP, etc.
A.
NV allows to use multiple proxies. For each site you are downloading from,
you can select a suitable proxy from the dropdown list. When you are adding
a job with a new site in the url (the site that you have never worked with
before), the proxy setting for this site will be chosen according to the
Default for Gopher, Default for HTTP, etc. settings. For example, you can
set your http proxy as default for HTTP sites and SocksV4 proxy for FTP
sites.
|
|
|
|
Q.
With the internet explorer it's often difficult to log in to ftp sites (server
returned bla bla extention) and if one wants to download an entire directory,
clicking and dropping the link doesn't work.
A.
Though Net Vampire is not an FTP browser, it provides an easy way
to download some or all files from the FTP directory even if you cannot
open this directory in your browser. Create
a new Job and enter a URL pointing to the FTP direrctory. N.V. will build a
directory listing (retrying as many times as necessary) and save it in HTML
format. Then you can click the Links tab and see the full list of files in
the directory, or choose Open Received File in the Job List context menu
to load the listing file in the browser. You can select files on the Links panel,
either manually or using a filter, and add them to the Job List. This approach
is also helpful if you need to download many files listed on a web page - say,
a graphics or MP3 collection. Just download this page with Net Vampire and use
the Links list.
|
|
|
|
Q.
I cannot downlaod ZIP files from WebJump, such as
http://retroworld.webjump.com/sh.zip
A.
WebJump is an advertiser-sponsored hosting service. When you request
a file, the server sends you a special html page (a so-called frameset)
which contains a link to their banner and the correct URL for the requested file.
Download this document, then click on the Links tab to list
all links in the page, and select the one that points to your file.
The correct URL for the file mentioned in your question is
http://216.49.10.245/re/retroworld-webjump/sh.zip
|