100	PCIAX
101	%s ActiveX Remote Control %s\n(c) NetSupport Ltd 2003
6101	&Abort
6102	&Retry
6103	&Ignore
6104	&Yes
6105	&No
6106	Cancel
6108	Values differ.  Please re-enter
6200	IPX
6201	TCP/IP
6202	NetBIOS
6203	MS Shell Dlg
6204	TCP/IP + NetBios
6205	TCP/IP + IPX
6206	IPX + NetBIOS
6207	TCP/IP + NetBIOS + IPX
6209	VNC
6210	HTTP
6300	Cannot load %s
6301	%s error (adapter %d), operation: %02xH, code: %d (%02xH)
6302	IPX network %lu (0x%lx) is not responding
6303	Waiting for %s to acknowledge.
6304	Client %s does not respond
6305	%s is a demonstration Client\nIt will deactivate after 5 minutes use
6306	Client %s already connected to Control %s
6307	Client %s rejected the link
6308	Demonstration Client %s has been deactivated
6309	Client %s unavailable (in graphics mode or logged off)
6310	%s has wrong version of CLIENT installed
6311	Wrong username or password
6312	Without supplying the correct password you can only send a message to this Client.\n\nTo Share, Watch, Control, Chat, Show or transfer files enter the correct password.
6313	Cannot open %s
6314	Client %s is running on this machine
6315	Client %s has disconnected.
6316	!Keep IDS_RMxxx in order
6317	Your Modem is configured incorrectly, Please configure the modem to use Hardware Flow control !
6318	%s is not a valid serial port (use com1 - com4); dial up support not available.
6319	%s is in use by another program or window
6326	!Keep next 3 in order
6327	Logging: %s
6328	Basic
6329	Verbose
6330	Extended
6331	Dialling %s
6332	Cannot open modem log %s
6333	Modem: %s
6334	Transport: %s
6335	Hanging up the phone...
6336	Error reading file %s
6337	Error writing file %s
6338	Error deleting %s
6339	Error renaming %s to %s
6340	Escape pressed
6341	Cannot communicate with the modem
6342	%s does not answer, or the line is busy.
6343	Error in file %s, line %d
6344	Querying modem...
6345	Done. See log file for results
6346	Modems Connected Successfully
6347	Waiting for %s to call back...
6348	Running modem diagnostics
6349	Running extended diagnostics
6350	(Use Remote Configuration to disable)
6351	!Keep the next 8 in order
6352	Communicate with %s Bridge
6353	Check XON/XOFF at Control
6354	Check XON/XOFF at %s Bridge
6355	Check XON/XOFF at Control and %s Bridge
6356	Check Modem Connection speed against PC to Modem baud rate
6357	Send 2KByte buffer
6358	Receive 2KByte buffer
6359	Exchange 2KByte buffer
6360	Connection speed tests skipped, incorrectly formatted connect message.
6361	Connection speed %u
6362	Test Result: %s.  Test took %d milliseconds
6363	Passed
6364	Failed!
6365	Unknown (%d)
6366	Connected to old Bridge - modem diagnostics not available
6367	The %s test failed!
6368	Retry Test [%d]
6369	Skip Test
6370	Cancel Test
6371	Average throughput %u bits per second.
6372	!Keep xxx_D in order
6373	There was no response from the Bridge.\n\nRetry test?
6374	The Control modem has XON/XOFF flow control enabled.\n\nRetry test?
6375	The Bridge modem has XON/XOFF flow control enabled.\n\nRetry test?
6376	The Control AND Bridge modems have XON/XOFF flow control enabled.\n\nRetry test?
6377	The Connection speed is greater than the PC to Modem baud rate.\n\nRetry test?
6378	Unable to send 2KByte buffer to Bridge.\n\nRetry test?
6379	Unable to receive 2KByte buffer from Bridge.\n\nRetry test?
6380	Unable to exchange 2KByte buffer with Bridge.\n\nRetry test?
6381	The time for the Bridge to respond seems excessive; performance may be adversely affected.
6382	The actual throughput is low compared to the Connection Speed.\n\nRetry test?
6392	!Keep NBSTACK's in order
6393	Unknown NetBIOS
6394	NetBEUI
6395	IPX/SPX NetBIOS
6396	TCP/IP NetBIOS
6397	DECnet NetBIOS
6398	DECnet NetBIOS
6409	 (dialup networking)
6410	Not found (%s)
6411	Initialising...
6412	Cannot connect to more than %d Clients
6413	Cannot load %s
6414	%s Bridge has disconnected, is not responding or has timed out
6415	The Bridge is not configured to support %s, or is not compatible with this version of the Control.
6416	%s is wrongly configured (no modem specified)
6417	Name '%s' already in use (on NetBIOS adapter #%d)
6418	Send test in progress, click Cancel to stop
6419	Echo test in progress, click Cancel to stop
6420	%d packets sent
6421	Checksum error sending data to Client; expected: %08lx, actual %08lx
6422	Sequence error sending data to Client; expected: %u, actual %u
6423	Checksum error receiving data from Client; expected: %08lx, actual %08lx
6424	Sequence error receiving data from Client; expected: %u, actual %u
6425	Sent %d x %d byte packets in %d msec = %d bytes/sec
6426	Transport %s is not enabled; to enable it, select 'Configure' from the 'Network' menu
6430	Error loading transport %s (adapter %d), operation: %02xH, code: %d (%02xH)
6432	The %s Bridge is using %s; do you want to unload it while making this call?
6433	Changing the Print Capture settings may truncate print data captured from %s.  Proceed?
6434	Changing the Print Capture settings will discard print data captured from %s.  Proceed?
6435	File %s already exists.  Overwrite (click No to append)?
6436	Error %d writing captured print output to %s.
6437	There are no printers installed on %s matching '%s'
6438	Using printer %s for print capture on Client %s
6439	You do not have sufficient rights at Client %s to perform this operation. Log in as a different user or contact the Administrator.
6440	Your transport DLL's are out of date; please contact your supplier.
6441	TCP/IP is not enabled - please run the Configurator.
6442	Control %s does not respond.
6443	TAPI/CAPI error, code %x
6444	There is no valid TAPI device configured - use Settings, Dialin Bridge to configure a valid TAPI device.
6445	%s is already in use, or another device is using the same port.
6446	The number of Clients found on the network exceeds your license limit.  Only the first %d Clients will be displayed.
6447	CAPI ISDN Driver
6448	%s does not answer, or the line is busy.  Check also that your ISDN modem cable is correctly attached.
6449	The CAPI 2.0 drivers are not installed on this machine
6450	Unable to complete connection, as one or more client are not using encryption.
6451	Unable to complete connection, as one or more client are not using the same encryption type.
6452	Unable to complete connection, as one or more client have encryption turned off or are not using same encryption type.
6453	The Client does not support the selected encryption mode, please upgrade this Client or select a lower encryption mode (i.e. DES). The Control will now disconnect from this Client.
6454	56 bit (DES)
6455	64 bit (Blowfish)
6456	128 bit (Twofish)
6457	256 bit (AES)
6458	The Client does not support the selected encryption mode.\n\nDo you wish to connect to the Client using DES encryption instead?
6459	\n please make sure that all client are using the same encryption type before continuing
6460	your request for an encrypted show
6461	You can only connect to Linux or Mac VNC clients.
6462	Client machine appears to be unreachable.
6463	The version of VNC installed on the client is not supported by NetSupportManager.
6464	Password authentication failed.
6465	Debug error (no administrative privileges)
6466	All Gateways
6467	Security Error.\n\nThe Client requires an Encryption level that is not available at the Control.
6468	Call to client %s was rejected by the Gateway because of an invalid Gateway Key.
6469	Call to client %s was rejected by the Gateway because your Gateway Key did not match the one for the client.
6470	Call to client %s was rejected by the Gateway because this would exceed the maximum licensed connections allowed by the Gateway licence.
6471	Client %s Failed to Acknowledge connection before timeout.
6472	One or more of the configured gateways rejected the browse request because of an invalid Gateway Key. Clients connected to these gateways will not be available.
6473	The selected gateway rejected the browse request because of an invalid Gateway Key. Clients connected to this gateway will not be available.
6500	on this machine
6507	Replay Files (*.rpf)|*.rpf|All files (*.*)|*.*|
6509	Wrong version of %s Client installed on Client machine
6510	on another machine
6511	The Client could not be loaded.\n\nInstall the Client on this machine if you want to use the Show feature.
6530	%s cannot send an announcement to %s %s
6531	while you are sending an announcement to it
6532	 at Client %s
6533	Cannot write to replay file %s, error %d.
6538	Client : %s
6539	Date & Time : %02d:%02d:%02d  %02d-%s-%02d
6540	Length : %02d:%02d:%02d
6541	Client %s cannot receive a UDP Show.  Either omit this Client from the Show or install the latest version of NetSupport on the Client machine.
6542	Student: %s     Date: %s     %s
6543	Client: %s    Date: %s     %s
6700	Audio hardware not installed or not functioning%s
6701	%s device is in use%s; please close the window or application responsible and try again.\n\nCheck also that your sound card supports duplex operation.
6702	Audio transmission format not supported%s; please choose a different format from the Audio tab in the Settings dialog.
6703	%s error %d%s; please check that your sound card is functioning properly.
6704	Audio input
6705	Audio output
65534	Copyright (c) 2003 NetSupport Ltd